public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Doug Ledford <dledford@redhat.com>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: aic7xxx problems?
Date: Fri, 4 Oct 2002 14:41:53 -0400	[thread overview]
Message-ID: <20021004184153.GA1916@redhat.com> (raw)
In-Reply-To: <367452704.1033669443@aslan.btc.adaptec.com>

On Thu, Oct 03, 2002 at 12:24:03PM -0600, Justin T. Gibbs wrote:
> >> Actually, in reviewing your message more fully, the problem is that
> >> the timeout for the rewind operation is too short for your 
> >> configuration.
> >> The timeout should go away if you bump up the timeout in the st driver
> >> so that your tape drive can rewind in peace.
> > 
> > The rewind is not *that* long, about 60 seconds...
> 
> Well, we are still waiting on the drive to do something, so its not
> the aic7xxx driver's fault.

It's possible that the controller could have disconnect disabled for the 
tape drive, causing it to hold the bus the entire time and making other 
commands time out (although unlikely unless someone actually went in and 
turned it off in the adapter config...)

-- 
  Doug Ledford <dledford@redhat.com>     919-754-3700 x44233
         Red Hat, Inc. 
         1801 Varsity Dr.
         Raleigh, NC 27606
  

  reply	other threads:[~2002-10-04 18:35 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-10-03  7:42 aic7xxx problems? Eriksson Stig
2002-10-03 18:24 ` Justin T. Gibbs
2002-10-04 18:41   ` Doug Ledford [this message]
2002-10-04 20:28     ` jbradford
  -- strict thread matches above, loose matches on Subject: below --
2002-10-02 12:40 Eriksson Stig
2002-10-02 14:21 ` Jos Hulzink
2002-10-02 17:08 ` Justin T. Gibbs
2002-10-02 17:10   ` Justin T. Gibbs
2002-10-02 22:50     ` Jos Hulzink
2002-10-02 23:33       ` Justin T. Gibbs
2002-10-03  7:31         ` Jos Hulzink

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20021004184153.GA1916@redhat.com \
    --to=dledford@redhat.com \
    --cc=gibbs@scsiguy.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox