From: Nick Orlov <nick.orlov@mail.ru>
To: Bruce Lowekamp <lowekamp@CS.WM.EDU>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.4.20-pre8 swaps ide controller order on A7V266-E
Date: Mon, 7 Oct 2002 22:30:36 -0400 [thread overview]
Message-ID: <20021008023036.GA14477@nikolas.hn.org> (raw)
In-Reply-To: <15570000.1033586626@chorus.cs.wm.edu>
[-- Attachment #1: Type: text/plain, Size: 1721 bytes --]
On Wed, Oct 02, 2002 at 03:23:46PM -0400, Bruce Lowekamp wrote:
>
> Starting with 2.4.19 and continuing in 2.4.20-pre8, the order the kernel
> associates with the two IDE controllers (one VIA vt8233 and one PDC20265
> intended for RAID use) on the A7V266-E has been reversed. The BIOS and
> GRUB consider the VIA to be first, so root(hd0,0) loads the kernel from the
> first device on the VIA controller. Prior to 2.4.19, the OS then booted
> with that drive identified as hda. Beginning with 2.4.19, however, the
> kernel instead identifies the PDC as ide0 and ide1, and puts the VIA at
> ide2 and ide3, resulting in the boot drive being hde.
>
> I found an earlier mention of this on the mailing list, but no solution or
> workaround was suggested. We are using a workaround where 2.4.19 and later
> kernels are booted with root=/dev/hde1 and earlier with hda1, and fstab
> lists both hda2 and hde2 as swap partitions, simply failing to insert one.
> This works, but the general ugliness and maintenance headaches since this
> is different than the typical machine config we use around here make it
> difficult to use in the long run.
>
> I'm not sure what the process of identifying order of controllers involves,
> but the discrepancy between the BIOS, older kernels, and newer kernels
> seems like something that should be fixed if possible.
>
> Thanks for any help,
> Bruce Lowekamp
You can apply this tiny patch.
Works for me just fine.
I have another version of patch - slightly bigger. It introduces new
config option CONFIG_PDC20265_PRIMARY. But peoples here don't like those
solutions. I was fighting a little bit and then gave up.
Hope it helps.
--
With best wishes,
Nick Orlov.
[-- Attachment #2: pdc20265.patch --]
[-- Type: text/plain, Size: 1067 bytes --]
--- linux/drivers/ide/ide-pci.c.orig 2002-08-01 21:41:29.000000000 -0400
+++ linux/drivers/ide/ide-pci.c 2002-08-01 21:10:27.000000000 -0400
@@ -405,7 +405,7 @@
#ifndef CONFIG_PDC202XX_FORCE
{DEVID_PDC20246,"PDC20246", PCI_PDC202XX, NULL, INIT_PDC202XX, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 16 },
{DEVID_PDC20262,"PDC20262", PCI_PDC202XX, ATA66_PDC202XX, INIT_PDC202XX, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 48 },
- {DEVID_PDC20265,"PDC20265", PCI_PDC202XX, ATA66_PDC202XX, INIT_PDC202XX, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 48 },
+ {DEVID_PDC20265,"PDC20265", PCI_PDC202XX, ATA66_PDC202XX, INIT_PDC202XX, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 48 },
{DEVID_PDC20267,"PDC20267", PCI_PDC202XX, ATA66_PDC202XX, INIT_PDC202XX, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 48 },
#else /* !CONFIG_PDC202XX_FORCE */
{DEVID_PDC20246,"PDC20246", PCI_PDC202XX, NULL, INIT_PDC202XX, NULL, {{0x50,0x02,0x02}, {0x50,0x04,0x04}}, OFF_BOARD, 16 },
next prev parent reply other threads:[~2002-10-08 2:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-02 19:23 2.4.20-pre8 swaps ide controller order on A7V266-E Bruce Lowekamp
2002-10-02 20:48 ` Samuel Flory
2002-10-08 2:30 ` Nick Orlov [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-10-07 12:24 David Balazic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021008023036.GA14477@nikolas.hn.org \
--to=nick.orlov@mail.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=lowekamp@CS.WM.EDU \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox