From: "Paolo Ciarrocchi" <ciarrocchi@linuxmail.org>
To: <davidsen@tmr.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re:Benchmark results from resp1 trivial response time test
Date: Wed, 16 Oct 2002 05:03:52 +0800 [thread overview]
Message-ID: <20021015210352.26833.qmail@linuxmail.org> (raw)
Hi all,
updated results:
Kernel version: 2.4.19
Starting 1 CPU run with 251 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 119.653 124.207 119.786 120.644 0.002 1.000
smallwrite 121.051 190.696 144.469 152.062 0.031 1.260
largewrite 117.412 11871.027 1113.563 3362.302 4.870 27.870
cpuload 119.691 313.702 178.513 190.324 0.081 1.578
spawnload 114.624 243.985 119.747 154.604 0.057 1.281
8ctx-mem 652.737 7564.493 1234.938 2527.273 2.904 20.948
2ctx-mem 126.914 8428.021 620.418 2941.043 3.890 24.378
Kernel version: 2.5.41-mm2
Starting 1 CPU run with 250 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.676 114.413 113.713 113.856 0.000 1.000
smallwrite 117.001 228.536 119.025 141.028 0.049 1.239
largewrite 116.102 1681.086 216.776 499.422 0.667 4.386
cpuload 105.461 160.513 105.834 116.661 0.025 1.025
spawnload 108.506 166.367 108.863 120.305 0.026 1.057
8ctx-mem 1789.834 9155.800 3790.198 4547.118 2.831 39.938
2ctx-mem 2290.391 10661.156 4810.641 5040.725 3.358 44.273
Kernel version: 2.5.41-mm2C
Starting 1 CPU run with 250 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.648 114.508 113.707 113.861 0.000 1.000
smallwrite 116.054 180.420 117.924 130.525 0.028 1.146
largewrite 114.019 179.770 120.451 134.021 0.028 1.177
cpuload 106.590 162.893 107.075 118.080 0.025 1.037
spawnload 106.574 164.898 107.490 118.671 0.026 1.042
8ctx-mem 7767.843 16917.625 8994.265 10906.788 3.844 95.790
2ctx-mem 6515.450 18273.101 10344.575 11217.755 4.822 98.521
Kernel version: 2.5.41-mm2C@128MiB
Starting 1 CPU run with 123 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.550 114.451 113.763 113.857 0.000 1.000
smallwrite 118.926 182.074 123.044 139.160 0.028 1.222
largewrite 119.864 186.550 139.593 148.957 0.027 1.308
cpuload 105.468 165.026 105.922 117.648 0.026 1.033
spawnload 106.408 162.414 106.778 117.861 0.025 1.035
8ctx-mem 7264.508 12232.155 8106.800 8836.428 1.965 77.610
2ctx-mem 7447.326 23237.534 11601.912 13325.664 6.527 117.038
Kernel version: 2.5.41
Starting 1 CPU run with 250 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.607 114.030 113.774 113.783 0.000 1.000
smallwrite 117.882 526.275 121.038 208.868 0.178 1.836
largewrite 1674.216 88428.871 14794.752 27750.852 34.851 243.892
cpuload 104.225 158.400 104.478 115.269 0.024 1.013
spawnload 105.933 166.818 106.682 118.452 0.027 1.041
8ctx-mem 116.458 8893.645 120.670 1875.275 3.923 16.481
2ctx-mem 116.847 10174.152 121.309 2130.303 4.497 18.722
Kernel version: 2.5.42-mm2
Starting 1 CPU run with 250 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.658 114.500 113.737 113.866 0.000 1.000
smallwrite 117.220 245.110 119.017 144.541 0.056 1.269
largewrite 114.841 181.420 118.746 131.568 0.028 1.155
cpuload 104.583 159.080 104.890 115.694 0.024 1.016
spawnload 108.790 166.141 109.655 120.698 0.025 1.060
8ctx-mem 114.430 8484.873 784.141 2066.476 3.604 18.148
2ctx-mem 121.388 8453.018 1414.443 2383.773 3.459 20.935
Kernel version: 2.5.42-mm3
Starting 1 CPU run with 250 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.616 114.280 113.714 113.823 0.000 1.000
smallwrite 119.452 188.512 123.024 138.799 0.029 1.219
largewrite 117.059 177.488 119.743 131.807 0.026 1.158
cpuload 104.678 165.664 104.837 117.055 0.027 1.028
spawnload 108.795 162.441 108.809 119.582 0.024 1.051
8ctx-mem 1056.455 10130.557 2031.861 3478.685 3.810 30.562
2ctx-mem 113.234 10068.534 1518.290 2861.645 4.073 25.141
Kernel version: 2.5.42
Starting 1 CPU run with 250 MB RAM, minimum 5 data points at 20 sec intervals
_____________ delay ms. ____________
Test low high median average S.D. ratio
noload 113.676 113.948 113.737 113.774 0.000 1.000
smallwrite 115.352 189.983 119.500 141.645 0.036 1.245
largewrite 19012.080 45528.170 30311.890 31472.632 9.646 276.625
cpuload 103.328 1267.116 103.971 336.462 0.520 2.957
spawnload 105.196 167.400 105.787 117.983 0.028 1.037
8ctx-mem 121.166 8616.232 126.489 1824.054 3.797 16.032
2ctx-mem 115.162 10291.470 119.560 2152.930 4.550 18.923
Ciao,
Paolo
P.S Andrew, do you like test and results ?
--
Get your free email from www.linuxmail.org
Powered by Outblaze
next reply other threads:[~2002-10-15 20:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-15 21:03 Paolo Ciarrocchi [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-10-17 20:16 Re:Benchmark results from resp1 trivial response time test Paolo Ciarrocchi
2002-10-15 19:15 Paolo Ciarrocchi
2002-10-14 21:30 Paolo Ciarrocchi
2002-10-15 1:31 ` Bill Davidsen
2002-10-14 7:38 Paolo Ciarrocchi
2002-10-13 16:47 Paolo Ciarrocchi
2002-10-13 21:02 ` Bill Davidsen
2002-10-13 15:25 Paolo Ciarrocchi
2002-10-13 11:57 Paolo Ciarrocchi
2002-10-13 13:38 ` Bill Davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021015210352.26833.qmail@linuxmail.org \
--to=ciarrocchi@linuxmail.org \
--cc=davidsen@tmr.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox