From: Cliff White <cliffw@osdl.org>
To: andmike@us.ibm.com, linux-kernel@vger.kernel.org, Matt_Domsch@Dell.com
Subject: Re: 2.5.44 compile problem: MegaRAID driver
Date: Mon, 21 Oct 2002 15:32:36 -0700 [thread overview]
Message-ID: <200210212232.g9LMWb503263@mail.osdl.org> (raw)
In-Reply-To: Message from Mike Anderson <andmike@us.ibm.com> of "Mon, 21 Oct 2002 14:28:27 PDT." <20021021212827.GF1069@beaverton.ibm.com>
> Cliff,
>
> The scsi host interface change in 2.5.44. The megaraid driver wanted
> direct access to this list to reorder it. This cannot be done anymore as
> we try get list coherence under control.
>
> I sent mail to linux-megaraid-devel@dell.com about this on Saturday. I
> have cc'd Matt Domsch on this mail.
>
> You may wish to wait a bit for a response from Matt before applying the
> patch.
>
> The patch below removes the reorder as I could not see why reorder the
> list. It also replaces some other traverse loops with a direct access to
> the host pointer copy.
>
> I have only compile tested this change and do not have a megaraid card.
>
> The maintainer of the driver will need to ok and comment on any side
> effects. I will look at the driver some more to see if I understand the
> reorder.
>
> -andmike
The patch compiles clean, the system boots and i've done fdisk and mke2fs
without
any kernel errors.
So far so good. Am running the DBT1 test, will report any errors. Thanks much,
mikeand!
cliffw
> --
> Michael Anderson
> andmike@us.ibm.com
>
> megaraid.c | 182 -------------------------------------------------------------
> megaraid.h | 2
> 2 files changed, 2 insertions(+), 182 deletions(-)
> ------
>
> --- 1.22/drivers/scsi/megaraid.c Tue Oct 8 11:40:48 2002
> +++ edited/drivers/scsi/megaraid.c Mon Oct 21 14:10:35 2002
> @@ -3217,7 +3217,6 @@
> count += mega_findCard (pHostTmpl, PCI_VENDOR_ID_AMI,
> PCI_DEVICE_ID_AMI_MEGARAID3, BOARD_QUARTZ);
>
> - mega_reorder_hosts ();
>
> #ifdef CONFIG_PROC_FS
> if (count) {
> @@ -3483,173 +3482,6 @@
> }
>
>
> -static void mega_reorder_hosts (void)
> -{
> - struct Scsi_Host *shpnt;
> - struct Scsi_Host *shone;
> - struct Scsi_Host *shtwo;
> - mega_host_config *boot_host;
> - int i;
> -
> - /*
> - * Find the (first) host which has it's BIOS enabled
> - */
> - boot_host = NULL;
> - for (i = 0; i < MAX_CONTROLLERS; i++) {
> - if (mega_hbas[i].is_bios_enabled) {
> - boot_host = mega_hbas[i].hostdata_addr;
> - break;
> - }
> - }
> -
> - if (boot_host == NULL) {
> - printk (KERN_WARNING "megaraid: no BIOS enabled.\n");
> - return;
> - }
> -
> - /*
> - * Traverse through the list of SCSI hosts for our HBA locations
> - */
> - shone = shtwo = NULL;
> - for (shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) {
> - /* Is it one of ours? */
> - for (i = 0; i < MAX_CONTROLLERS; i++) {
> - if ((mega_host_config *) shpnt->hostdata ==
> - mega_hbas[i].hostdata_addr) {
> - /* Does this one has BIOS enabled */
> - if (mega_hbas[i].hostdata_addr == boot_host) {
> -
> - /* Are we first */
> - if (shtwo == NULL) /* Yes! */
> - return;
> - else { /* :-( */
> - shone = shpnt;
> - }
> - } else {
> - if (!shtwo) {
> - /* were we here before? xchng first */
> - shtwo = shpnt;
> - }
> - }
> - break;
> - }
> - }
> - /*
> - * Have we got the boot host and one which does not have the bios
> - * enabled.
> - */
> - if (shone && shtwo)
> - break;
> - }
> - if (shone && shtwo) {
> - mega_swap_hosts (shone, shtwo);
> - }
> -
> - return;
> -}
> -
> -static void mega_swap_hosts (struct Scsi_Host *shone, struct Scsi_Host *shtwo)
> -{
> - struct Scsi_Host *prevtoshtwo;
> - struct Scsi_Host *prevtoshone;
> - struct Scsi_Host *save = NULL;;
> -
> - /* Are these two nodes adjacent */
> - if (shtwo->next == shone) {
> -
> - if (shtwo == scsi_hostlist && shone->next == NULL) {
> -
> - /* just two nodes */
> - scsi_hostlist = shone;
> - shone->next = shtwo;
> - shtwo->next = NULL;
> - } else if (shtwo == scsi_hostlist) {
> - /* first two nodes of the list */
> -
> - scsi_hostlist = shone;
> - shtwo->next = shone->next;
> - scsi_hostlist->next = shtwo;
> - } else if (shone->next == NULL) {
> - /* last two nodes of the list */
> -
> - prevtoshtwo = scsi_hostlist;
> -
> - while (prevtoshtwo->next != shtwo)
> - prevtoshtwo = prevtoshtwo->next;
> -
> - prevtoshtwo->next = shone;
> - shone->next = shtwo;
> - shtwo->next = NULL;
> - } else {
> - prevtoshtwo = scsi_hostlist;
> -
> - while (prevtoshtwo->next != shtwo)
> - prevtoshtwo = prevtoshtwo->next;
> -
> - prevtoshtwo->next = shone;
> - shtwo->next = shone->next;
> - shone->next = shtwo;
> - }
> -
> - } else if (shtwo == scsi_hostlist && shone->next == NULL) {
> - /* shtwo at head, shone at tail, not adjacent */
> -
> - prevtoshone = scsi_hostlist;
> -
> - while (prevtoshone->next != shone)
> - prevtoshone = prevtoshone->next;
> -
> - scsi_hostlist = shone;
> - shone->next = shtwo->next;
> - prevtoshone->next = shtwo;
> - shtwo->next = NULL;
> - } else if (shtwo == scsi_hostlist && shone->next != NULL) {
> - /* shtwo at head, shone is not at tail */
> -
> - prevtoshone = scsi_hostlist;
> - while (prevtoshone->next != shone)
> - prevtoshone = prevtoshone->next;
> -
> - scsi_hostlist = shone;
> - prevtoshone->next = shtwo;
> - save = shtwo->next;
> - shtwo->next = shone->next;
> - shone->next = save;
> - } else if (shone->next == NULL) {
> - /* shtwo not at head, shone at tail */
> -
> - prevtoshtwo = scsi_hostlist;
> - prevtoshone = scsi_hostlist;
> -
> - while (prevtoshtwo->next != shtwo)
> - prevtoshtwo = prevtoshtwo->next;
> - while (prevtoshone->next != shone)
> - prevtoshone = prevtoshone->next;
> -
> - prevtoshtwo->next = shone;
> - shone->next = shtwo->next;
> - prevtoshone->next = shtwo;
> - shtwo->next = NULL;
> -
> - } else {
> - prevtoshtwo = scsi_hostlist;
> - prevtoshone = scsi_hostlist;
> - save = NULL;;
> -
> - while (prevtoshtwo->next != shtwo)
> - prevtoshtwo = prevtoshtwo->next;
> - while (prevtoshone->next != shone)
> - prevtoshone = prevtoshone->next;
> -
> - prevtoshtwo->next = shone;
> - save = shone->next;
> - shone->next = shtwo->next;
> - prevtoshone->next = shtwo;
> - shtwo->next = save;
> - }
> - return;
> -}
> -
> static inline void mega_freeSgList (mega_host_config * megaCfg)
> {
> int i;
> @@ -4684,12 +4516,7 @@
> /*
> * Find this host
> */
> - for( shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next ) {
> - if( shpnt->hostdata == (unsigned long *)megaCtlrs[adapno] ) {
> - megacfg = (mega_host_config *)shpnt->hostdata;
> - break;
> - }
> - }
> + shpnt = megaCtlrs[adapno]->host;
> if(shpnt == NULL) return -ENODEV;
>
> #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
> @@ -4804,12 +4631,7 @@
> /*
> * Find this host
> */
> - for( shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next ) {
> - if( shpnt->hostdata == (unsigned long *)megaCtlrs[adapno] ) {
> - megacfg = (mega_host_config *)shpnt->hostdata;
> - break;
> - }
> - }
> + shpnt = megaCtlrs[adapno]->host;
> if(shpnt == NULL) return -ENODEV;
>
> /*
> --- 1.9/drivers/scsi/megaraid.h Sun Jul 21 01:55:49 2002
> +++ edited/drivers/scsi/megaraid.h Mon Oct 21 13:58:19 2002
> @@ -988,8 +988,6 @@
> int lock, int intr);
>
> static int mega_is_bios_enabled (mega_host_config *);
> -static void mega_reorder_hosts (void);
> -static void mega_swap_hosts (struct Scsi_Host *, struct Scsi_Host *);
>
> static void mega_create_proc_entry (int index, struct proc_dir_entry *);
> static int mega_support_ext_cdb(mega_host_config *);
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2002-10-21 22:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-21 20:31 2.5.44 compile problem: MegaRAID driver Cliff White
2002-10-21 21:28 ` Mike Anderson
2002-10-21 22:32 ` Cliff White [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-10-21 22:10 Matt_Domsch
2002-10-21 22:31 ` Alan Cox
2002-10-21 22:25 ` Doug Ledford
2002-10-21 22:29 ` Matt Domsch
2002-10-21 22:33 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200210212232.g9LMWb503263@mail.osdl.org \
--to=cliffw@osdl.org \
--cc=Matt_Domsch@Dell.com \
--cc=andmike@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox