* [2.5.45] CDRW not working
@ 2002-11-02 15:21 Kronos
2002-11-02 15:27 ` Jens Axboe
0 siblings, 1 reply; 8+ messages in thread
From: Kronos @ 2002-11-02 15:21 UTC (permalink / raw)
To: linux-kernel; +Cc: axboe
Hi,
I can't even mount a cd using my CDRW drive (CD-ROM drive is ok).
I see the following messages:
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
cdrom: open failed.
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
cdrom: open failed.
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
cdrom: open failed.
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
>From bootlog:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLlct10 10, ATA DISK drive
hda: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CRD-8520B, ATAPI CD/DVD-ROM drive
hdd: CRW6206A, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
hdd: DMA disabled
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=1247/255/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 > p3 p4
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 6X CD-ROM CD-R/RW drive, 512kB Cache, DMA
ciao,
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
"La mia teoria scientifica preferita e` quella secondo la quale gli
anelli di Saturno sarebbero interamente composti dai bagagli andati
persi nei viaggi aerei." -- Mark Russel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [2.5.45] CDRW not working
2002-11-02 15:21 [2.5.45] CDRW not working Kronos
@ 2002-11-02 15:27 ` Jens Axboe
2002-11-02 17:47 ` Kronos
0 siblings, 1 reply; 8+ messages in thread
From: Jens Axboe @ 2002-11-02 15:27 UTC (permalink / raw)
To: Kronos; +Cc: linux-kernel
On Sat, Nov 02 2002, Kronos wrote:
> Hi,
> I can't even mount a cd using my CDRW drive (CD-ROM drive is ok).
>
> I see the following messages:
Does 2.5.42 work?
--
Jens Axboe
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [2.5.45] CDRW not working
2002-11-02 15:27 ` Jens Axboe
@ 2002-11-02 17:47 ` Kronos
2002-11-02 21:35 ` Jens Axboe
0 siblings, 1 reply; 8+ messages in thread
From: Kronos @ 2002-11-02 17:47 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-kernel
Il Sat, Nov 02, 2002 at 04:27:25PM +0100, Jens Axboe ha scritto:
> > I can't even mount a cd using my CDRW drive (CD-ROM drive is ok).
>
> Does 2.5.42 work?
I can reproduce it using hdparm -i /dev/hdd:
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04Aborted Command
hdd: irq timeout: status=0xd0 { Busy }
hdd: irq timeout: error=0xd0LastFailedSense 0x0d
hdd: status timeout: status=0xd0 { Busy }
hdd: status timeout: error=0xd0LastFailedSense 0x0d
hdd: DMA disabled
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
end_request: I/O error, dev 16:40, sector 0
end_request: I/O error, dev 16:40, sector 0
hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
hdd: request sense failure: error=0x50LastFailedSense 0x05
>From now on I can't use the drive. The same happens on 2.5.45.
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
La differenza fra l'intelligenza e la stupidita`?
All'intelligenza c'e` un limite.
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [2.5.45] CDRW not working
2002-11-02 17:47 ` Kronos
@ 2002-11-02 21:35 ` Jens Axboe
2002-11-03 14:53 ` Kronos
0 siblings, 1 reply; 8+ messages in thread
From: Jens Axboe @ 2002-11-02 21:35 UTC (permalink / raw)
To: Kronos; +Cc: linux-kernel
On Sat, Nov 02 2002, Kronos wrote:
> Il Sat, Nov 02, 2002 at 04:27:25PM +0100, Jens Axboe ha scritto:
> > > I can't even mount a cd using my CDRW drive (CD-ROM drive is ok).
> >
> > Does 2.5.42 work?
>
> I can reproduce it using hdparm -i /dev/hdd:
>
> hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
> hdd: drive_cmd: error=0x04Aborted Command
> hdd: irq timeout: status=0xd0 { Busy }
> hdd: irq timeout: error=0xd0LastFailedSense 0x0d
> hdd: status timeout: status=0xd0 { Busy }
> hdd: status timeout: error=0xd0LastFailedSense 0x0d
> hdd: DMA disabled
> hdd: drive not ready for command
> hdd: ATAPI reset complete
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: packet command error: error=0x50
> end_request: I/O error, dev 16:40, sector 0
> end_request: I/O error, dev 16:40, sector 0
> hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error }
> hdd: request sense failure: error=0x50LastFailedSense 0x05
What is this, 2.5.42 or 2.5.45? Does 2.5.42 work or not? You haven't
answered my question at all.
--
Jens Axboe
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [2.5.45] CDRW not working
2002-11-02 21:35 ` Jens Axboe
@ 2002-11-03 14:53 ` Kronos
2002-11-03 15:01 ` Jens Axboe
0 siblings, 1 reply; 8+ messages in thread
From: Kronos @ 2002-11-03 14:53 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-kernel
Il Sat, Nov 02, 2002 at 10:35:29PM +0100, Jens Axboe ha scritto:
> On Sat, Nov 02 2002, Kronos wrote:
> > Il Sat, Nov 02, 2002 at 04:27:25PM +0100, Jens Axboe ha scritto:
> > > > I can't even mount a cd using my CDRW drive (CD-ROM drive is ok).
> > >
> > > Does 2.5.42 work?
> >
> > I can reproduce it using hdparm -i /dev/hdd:
[cut]
> What is this, 2.5.42 or 2.5.45?
Both.
> Does 2.5.42 work or not?
If I don't use hdparm 2.5.42 works. On 2.5.45 it's random.
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
Mi piace avere amici rispettabili;
Mi piace essere il peggiore della compagnia.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [2.5.45] CDRW not working
2002-11-03 14:53 ` Kronos
@ 2002-11-03 15:01 ` Jens Axboe
2002-11-03 15:39 ` Kronos
2002-11-04 18:00 ` Kronos
0 siblings, 2 replies; 8+ messages in thread
From: Jens Axboe @ 2002-11-03 15:01 UTC (permalink / raw)
To: Kronos; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 611 bytes --]
On Sun, Nov 03 2002, Kronos wrote:
> Il Sat, Nov 02, 2002 at 10:35:29PM +0100, Jens Axboe ha scritto:
> > On Sat, Nov 02 2002, Kronos wrote:
> > > Il Sat, Nov 02, 2002 at 04:27:25PM +0100, Jens Axboe ha scritto:
> > > > > I can't even mount a cd using my CDRW drive (CD-ROM drive is ok).
> > > >
> > > > Does 2.5.42 work?
> > >
> > > I can reproduce it using hdparm -i /dev/hdd:
>
> [cut]
>
> > What is this, 2.5.42 or 2.5.45?
>
> Both.
>
> > Does 2.5.42 work or not?
>
> If I don't use hdparm 2.5.42 works. On 2.5.45 it's random.
2.5.45 with attached patch, how does that compare?
--
Jens Axboe
[-- Attachment #2: idecd-cdb-size-3 --]
[-- Type: text/plain, Size: 2296 bytes --]
===== drivers/ide/ide-cd.c 1.27 vs edited =====
--- 1.27/drivers/ide/ide-cd.c Fri Oct 18 20:02:55 2002
+++ edited/drivers/ide/ide-cd.c Sun Nov 3 14:45:32 2002
@@ -872,15 +872,16 @@
* changed 5 parameters to 3 for dvd-ram
* struct packet_command *pc; now packet_command_t *pc;
*/
+#define ATAPI_MIN_CDB_BYTES 12
static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
struct request *rq,
ide_handler_t *handler)
{
unsigned char *cmd_buf = rq->cmd;
- int cmd_len = sizeof(rq->cmd);
unsigned int timeout = rq->timeout;
struct cdrom_info *info = drive->driver_data;
ide_startstop_t startstop;
+ unsigned int cmd_len;
if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
/* Here we should have been called after receiving an interrupt
@@ -902,6 +903,11 @@
/* Arm the interrupt handler. */
ide_set_handler(drive, handler, timeout, cdrom_timer_expiry);
+
+ /* cdb length, pad upto the 12th byte if necessary */
+ cmd_len = COMMAND_SIZE(rq->cmd[0]);
+ if (cmd_len < ATAPI_MIN_CDB_BYTES)
+ cmd_len = ATAPI_MIN_CDB_BYTES;
/* Send the command to the device. */
HWIF(drive)->atapi_output_bytes(drive, cmd_buf, cmd_len);
===== drivers/scsi/scsi.h 1.29 vs edited =====
--- 1.29/drivers/scsi/scsi.h Thu Oct 17 23:16:34 2002
+++ edited/drivers/scsi/scsi.h Sun Nov 3 14:45:10 2002
@@ -164,8 +164,6 @@
#define SCSI_OWNER_BH_HANDLER 0x104
#define SCSI_OWNER_NOBODY 0x105
-#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
-
#define IDENTIFY_BASE 0x80
#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
((can_disconnect) ? 0x40 : 0) |\
@@ -415,7 +413,6 @@
extern unsigned int scsi_need_isa_buffer; /* True if some devices need indirection
* buffers */
extern volatile int in_scan_scsis;
-extern const unsigned char scsi_command_size[8];
extern struct bus_type scsi_driverfs_bus_type;
===== include/scsi/scsi.h 1.5 vs edited =====
--- 1.5/include/scsi/scsi.h Mon Jun 10 02:34:54 2002
+++ edited/include/scsi/scsi.h Sun Nov 3 14:45:09 2002
@@ -223,4 +223,7 @@
/* Used to get the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+extern const unsigned char scsi_command_size[8];
+#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
+
#endif
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [2.5.45] CDRW not working
2002-11-03 15:01 ` Jens Axboe
@ 2002-11-03 15:39 ` Kronos
2002-11-04 18:00 ` Kronos
1 sibling, 0 replies; 8+ messages in thread
From: Kronos @ 2002-11-03 15:39 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-kernel
Il Sun, Nov 03, 2002 at 04:01:50PM +0100, Jens Axboe ha scritto:
> > > Does 2.5.42 work or not?
> >
> > If I don't use hdparm 2.5.42 works. On 2.5.45 it's random.
>
> 2.5.45 with attached patch, how does that compare?
The first patch doesn't apply to 2.5.45. cmd_len was removed in 2.5.45.
This one should be ok, right?
--- ide-cd.c.orig Sun Nov 3 16:34:38 2002
+++ ide-cd.c Sun Nov 3 16:36:52 2002
@@ -884,6 +884,7 @@
{
struct cdrom_info *info = drive->driver_data;
ide_startstop_t startstop;
+ unsigned int cmd_len;
if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
/* Here we should have been called after receiving an interrupt
@@ -905,8 +906,12 @@
/* Arm the interrupt handler. */
ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+ cmd_len = COMMAND_SIZE(rq->cmd[0]);
+ if (cmd_len < ATAPI_MIN_CDB_BYTES)
+ cmd_len = ATAPI_MIN_CDB_BYTES;
+
/* Send the command to the device. */
- HWIF(drive)->atapi_output_bytes(drive, rq->cmd, sizeof(rq->cmd));
+ HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len);
/* Start the DMA if need be */
if (info->dma)
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
Carpe diem, quam minimum credula postero. (Q. Horatius Flaccus)
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [2.5.45] CDRW not working
2002-11-03 15:01 ` Jens Axboe
2002-11-03 15:39 ` Kronos
@ 2002-11-04 18:00 ` Kronos
1 sibling, 0 replies; 8+ messages in thread
From: Kronos @ 2002-11-04 18:00 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-kernel
Il Sun, Nov 03, 2002 at 04:01:50PM +0100, Jens Axboe ha scritto:
> > If I don't use hdparm 2.5.42 works. On 2.5.45 it's random.
>
> 2.5.45 with attached patch, how does that compare?
Ok, I tested you patch. Now I can mount, read, etc. without errors, but
I can still hang the drive usign hdparm -I.
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2002-11-04 17:54 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-02 15:21 [2.5.45] CDRW not working Kronos
2002-11-02 15:27 ` Jens Axboe
2002-11-02 17:47 ` Kronos
2002-11-02 21:35 ` Jens Axboe
2002-11-03 14:53 ` Kronos
2002-11-03 15:01 ` Jens Axboe
2002-11-03 15:39 ` Kronos
2002-11-04 18:00 ` Kronos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox