From: Silvio Cesare <silvio@big.net.au>
To: linux-kernel@vger.kernel.org
Subject: sis650/5513 in 2.4.19 (still broken for 650)
Date: Tue, 19 Nov 2002 09:24:01 +1100 [thread overview]
Message-ID: <20021118222401.GA3777@localhost.localdomain> (raw)
[-- Attachment #1: Type: text/plain, Size: 23 bytes --]
Attachment.
--
Silvio
[-- Attachment #2: sis650 --]
[-- Type: text/plain, Size: 8852 bytes --]
No fixes here.. just reports for anyone interested :(
1) sis650/5513 chipset does not work with UDMA - this was reported a while
ago, and also reported fixed.. but I don't think its been tested on a
sis650 specifically, which (for me) appears still broken (fs
corruptions etc).
this was reported fixed in 2.4.19; i took a 2.4.18 kernel, and replaced
drivers/ide/sis5513.c (theres some includes also, but perhaps not
important). this came up with the same problems as 2.4.18.
2.4.18 incidentally has a function #if 0, at the end of sis5513.c,
which I had to make #if 1 (remove) to get a compile (there appears to be
no other declaration of this code in the tree) - this has probably
been noticed a long time ago I imagine (?).
for the UDMA issues, recompiling with -->
#define BROKEN_LEVEL XFER_SW_DMA_0
gets it up and running again (ie, without UDMA).
incidentally.. the sis 0.13 code by the maintainers have patches
against 2.4.18 which break when you run it with #define DEBUG, as
some var names have been slightly modified.
2) External floppy drive via USB not 100% working.. No idea on this one;
I've included very small snippets of bootup messages, but it's no
major drama currently (works for the most part), so I don't really
expect anyone to look at this (especially with the minimal info
I've provided here) :)
For the sis650, maybe (?) the following will help -->
[ I've no real clue how useful or non useful this is, but maybe its
worth a look for the current development ]
Nov 18 15:57:19 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 18 15:57:19 localhost kernel: SIS5513: IDE controller on PCI bus 00 dev 15
Nov 18 15:57:19 localhost kernel: SIS5513: chipset revision 208
Nov 18 15:57:19 localhost kernel: SIS5513: not 100%% native mode: will probe irqs later
Nov 18 15:57:19 localhost kernel: SiS650 ATA 100 controller
Nov 18 15:57:19 localhost kernel: SIS5513 pci_init_sis5513 start
Nov 18 15:57:19 localhost kernel: SIS5513 dump:
Nov 18 15:57:19 localhost kernel: 0x0:0x39 0x1:0x10 0x2:0x13 0x3:0x55 0x4:0x5 0x5:0x0 0x6:0x0 0x7:0x0 0x8:0xd0 0x9:0x80 0xa:0x1 0xb:0x1 0xc:0x0 0xd:0x80 0xe:0x80 0xf:0x0
Nov 18 15:57:19 localhost kernel: 0x10:0x0 0x11:0x0 0x12:0x0 0x13:0x0 0x14:0x0 0x15:0x0 0x16:0x0 0x17:0x0 0x18:0x0 0x19:0x0 0x1a:0x0 0x1b:0x0 0x1c:0x0 0x1d:0x0 0x1e:0x0 0x1f:0x0
Nov 18 15:57:19 localhost kernel: 0x20:0x1 0x21:0xff 0x22:0x0 0x23:0x0 0x24:0x0 0x25:0x0 0x26:0x0 0x27:0x0 0x28:0x0 0x29:0x0 0x2a:0x0 0x2b:0x0 0x2c:0x39 0x2d:0x10 0x2e:0x13 0x2f:0x55
Nov 18 15:57:19 localhost kernel: 0x30:0x0 0x31:0x0 0x32:0x0 0x33:0x0 0x34:0x0 0x35:0x0 0x36:0x0 0x37:0x0 0x38:0x0 0x39:0x0 0x3a:0x0 0x3b:0x0 0x3c:0x0 0x3d:0x0 0x3e:0x0 0x3f:0x0
Nov 18 15:57:19 localhost kernel: 0x40:0x31 0x41:0x81 0x42:0x0 0x43:0x0 0x44:0x31 0x45:0x85 0x46:0x0 0x47:0x0 0x48:0xf8 0x49:0x1 0x4a:0xe6 0x4b:0x11 0x4c:0x0 0x4d:0x2 0x4e:0x0 0x4f:0x2 0x50:0x1 0x51:0x0 0x52:0x1 0x53:0x6 0x54:0x0 0x55:0x0 0x56:0x0 0x57:0x0
Nov 18 15:57:19 localhost kernel: SIS5513: pci_init_sis5513 end, changed registers:
Nov 18 15:57:19 localhost kernel: none
Nov 18 15:57:19 localhost kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
Nov 18 15:57:19 localhost kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Nov 18 15:57:19 localhost kernel: hda: IC25N040ATCS04-0, ATA DISK drive
Nov 18 15:57:19 localhost kernel: hdc: QSI CD-RW/DVD-ROM SBW-081, ATAPI CD/DVD-ROM drive
Nov 18 15:57:19 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 18 15:57:19 localhost nfslock: rpc.statd startup succeeded
Nov 18 15:57:19 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp, drive 0
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers:
Nov 18 15:57:19 localhost rpc.statd[672]: Version 1.0.1 Starting
Nov 18 15:57:19 localhost kernel: none
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers:
Nov 18 15:57:19 localhost kernel: none
Nov 18 15:57:19 localhost keytable: Loading keymap:
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers:
Nov 18 15:57:19 localhost kernel: none
Nov 18 15:57:19 localhost keytable:
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp, drive 0
Nov 18 15:57:19 localhost keytable:
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers:
Nov 18 15:57:19 localhost kernel: none
Nov 18 15:57:19 localhost rc: Starting keytable: succeeded
Nov 18 15:57:19 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers:
Nov 18 15:57:19 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio, drive 0, pio 4, timing 4
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp, drive 0
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio, drive 0, pio 4, timing 4
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_chipset_for_dma, drive 0, ultra 3f, udma_66 0
Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset, drive 0, speed
66
Nov 18 15:57:20 localhost kernel: SIS5513: BROKEN_LEVEL activated, speed=66 -> speed=16
Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset end, changed registers:
Nov 18 15:57:20 localhost random: Initializing random number generator: succeeded
Nov 18 15:57:20 localhost kernel: 0x41: 0x81 -> 0x1
Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: error=0x04 { DriveStatusError }
Nov 18 15:57:20 localhost kernel: SIS5513: config_chipset_for_dma, drive 0, ultra 3f, udma_66 0
Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset, drive 0, speed
34
Nov 18 15:57:20 localhost kernel: SIS5513: BROKEN_LEVEL activated, speed=34 -> speed=16
Nov 18 15:57:20 localhost kernel: SIS5513: sis5513_tune_chipset end, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
Nov 18 15:57:20 localhost kernel: hda: set_drive_speed_status: error=0x04 { DriveStatusError }
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp, drive 0
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp end, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio, drive 0, pio 4, timing 4
Nov 18 15:57:20 localhost kernel: SIS5513: config_drive_art_rwp_pio start, changed registers:
Nov 18 15:57:20 localhost kernel: none
Nov 18 15:57:20 localhost kernel: hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63
-- some logs probably not relevant (re floppy), but oh well..
Nov 18 15:57:20 localhost kernel: usb.c: USB device 2 (vend/prod 0x3ee/0x6901) is not claimed by any active driver.
Nov 18 15:57:20 localhost kernel: SCSI subsystem driver Revision: 1.00
Nov 18 15:57:20 localhost kernel: Initializing USB Mass Storage driver...
Nov 18 15:57:20 localhost kernel: usb.c: registered new driver usb-storage
Nov 18 15:57:20 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 18 15:57:20 localhost kernel: Vendor: MITSUMI Model: USB FDD Rev: 1039
Nov 18 15:57:20 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 18 15:57:20 localhost kernel: USB Mass Storage support registered.
--
Silvio
next reply other threads:[~2002-11-18 23:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-18 22:24 Silvio Cesare [this message]
2002-11-19 10:58 ` sis650/5513 in 2.4.19 (still broken for 650) Lionel Bouton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021118222401.GA3777@localhost.localdomain \
--to=silvio@big.net.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox