From: Karsten Desler <soohrt@soohrt.org>
To: Christian Guggenberger
<Christian.Guggenberger@physik.uni-regensburg.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.4.20-rc1-ac4 HPT374 doesn't find connected ide drives
Date: Tue, 19 Nov 2002 16:22:44 +0100 [thread overview]
Message-ID: <20021119152244.GA26989@sit0.ifup.net> (raw)
In-Reply-To: <20021119113300.C23008@pc9391.uni-regensburg.de>
> Maybe U would try 2.5.48, just to see if it works then.
I tried 2.5.48 but Linux didn't detect ide3,4,5,6.
---
DEV: registering device: ID = '00:0e.0', name = Triones Technologies HPT374
kobject 00:0e.0: registering
parent is pci0
bus pci: add device 00:0e.0
DEV: registering device: ID = '00:0e.1', name = Triones Technologies HPT374 (#2)
kobject 00:0e.1: registering
parent is pci0
bus pci: add device 00:0e.1
[..]
bus type 'ide' registered
HPT374: IDE controller at PCI slot 00:0e.0
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
PCI: Found IRQ 10 for device 00:0e.1
PCI: Sharing IRQ 10 with 00:0e.0
---
2.5.47 won't boot.
2.5.46 is working:
---
Linux version 2.5.46 (root@pikelot) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Tue Nov 19 15:19:44 CET 2002
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT374: IDE controller at PCI slot 00:0e.0
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
HPT374: chipset revision 7
HPT374: not 100%% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:DMA, hdh:DMA
PCI: Found IRQ 10 for device 00:0e.1
PCI: Sharing IRQ 10 with 00:0e.0
HPT37X: using 33MHz PCI clock
ide4: BM-DMA at 0xc800-0xc807, BIOS settings: hdi:DMA, hdj:DMA
ide5: BM-DMA at 0xc808-0xc80f, BIOS settings: hdk:DMA, hdl:DMA
hdg: MAXTOR 4K080H4, ATA DISK drive
hdh: WDC WD800AB-00CBA0, ATA DISK drive
ide3 at 0xac00-0xac07,0xb002 on irq 10
hdi: MAXTOR 4K080H4, ATA DISK drive
hdj: WDC WD800AB-00CBA0, ATA DISK drive
ide4 at 0xb800-0xb807,0xbc02 on irq 10
hdk: MAXTOR 4K080H4, ATA DISK drive
hdl: MAXTOR 4K080H4, ATA DISK drive
ide5 at 0xc000-0xc007,0xc402 on irq 10
---
> When I'm back home in about 7 hours, I'll check my bios settings, maybe this
> could help you.
That would be great, thanks.
Karsten
next prev parent reply other threads:[~2002-11-19 15:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-19 9:59 2.4.20-rc1-ac4 HPT374 doesn't find connected ide drives Christian Guggenberger
2002-11-19 10:23 ` Karsten 'soohrt' Desler
2002-11-19 10:33 ` Christian Guggenberger
2002-11-19 13:04 ` Alan Cox
2002-11-19 15:22 ` Karsten Desler [this message]
2002-11-19 17:03 ` Christian Guggenberger
2002-11-19 19:35 ` Karsten Desler
2002-11-19 23:39 ` Ulrich Wiederhold
2002-11-20 16:53 ` Christian Guggenberger
2002-11-20 19:13 ` Karsten Desler
-- strict thread matches above, loose matches on Subject: below --
2002-11-19 8:52 Karsten Desler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021119152244.GA26989@sit0.ifup.net \
--to=soohrt@soohrt.org \
--cc=Christian.Guggenberger@physik.uni-regensburg.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox