[patch]back ports ICH3M support into 2.4.20

[hugang <hugang@soulinfo.com>]

[-- Attachment #1: Type: text/plain, Size: 149 bytes --]

hello 
  Here is a back port patch for Intel ICH3M IDE support. It's more stable for me. Hope can merage into stable tree. thanks.


-- 
		- Hu Gang

[-- Attachment #2: misc_tune --]
[-- Type: application/octet-stream, Size: 2295 bytes --]

diff -u 2.4/drivers/ide/ide-pci.c:1.1.1.5 2.4/drivers/ide/ide-pci.c:1.1.1.5.8.2
--- 2.4/drivers/ide/ide-pci.c:1.1.1.5	Fri Nov 29 13:57:33 2002
+++ 2.4/drivers/ide/ide-pci.c	Sun Dec  1 12:50:44 2002
@@ -964,6 +964,41 @@
 	ide_setup_pci_device(dev2, d2);
 }
 
+inline void ide_register_xp_fix(struct pci_dev *dev)
+{
+        int i;
+        unsigned short cmd;
+        unsigned long flags;
+        unsigned long base_address[4] = { 0x1f0, 0x3f4, 0x170, 0x374 };
+	
+        local_irq_save(flags);
+        pci_read_config_word(dev, PCI_COMMAND, &cmd);
+        pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
+        for (i=0; i<4; i++) {
+                dev->resource[i].start = 0;
+                dev->resource[i].end = 0;
+                dev->resource[i].flags = 0;
+        }                                                                        
+        for (i=0; i<4; i++) {                                                    
+                dev->resource[i].start = base_address[i];
+                dev->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+                pci_write_config_dword(dev,
+				       (PCI_BASE_ADDRESS_0 + (i * 4)),
+				       dev->resource[i].start);
+        }
+        pci_write_config_word(dev, PCI_COMMAND, cmd);
+        local_irq_restore(flags);
+}
+
+void __init fixup_device_piix (struct pci_dev *dev, ide_pci_device_t *d)
+{
+        if (dev->resource[0].start != 0x01F1)
+                ide_register_xp_fix(dev);
+        printk("%s: IDE controller on PCI bus %02x dev %02x\n",
+	       d->name, dev->bus->number, dev->devfn);
+        ide_setup_pci_device(dev, d);
+}
+
 /*
  * ide_scan_pcibus() gets invoked at boot time from ide.c.
  * It finds all PCI IDE controllers and calls ide_setup_pci_device for them.
@@ -990,6 +1025,8 @@
 		hpt366_device_order_fixup(dev, d);
 	else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_PDC20270))
 		pdc20270_device_order_fixup(dev, d);
+        else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_ICH3M))
+                fixup_device_piix(dev, d);
 	else if (!IDE_PCI_DEVID_EQ(d->devid, IDE_PCI_DEVID_NULL) || (dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
 		if (IDE_PCI_DEVID_EQ(d->devid, IDE_PCI_DEVID_NULL))
 			printk("%s: unknown IDE controller on PCI bus %02x device %02x, VID=%04x, DID=%04x\n",