From: Jun Sun <jsun@mvista.com>
To: linux-kernel@vger.kernel.org, linux-mips@linux-mips.org
Cc: jsun@mvista.com
Subject: possible cache aliasing problem with O_DIRECT?
Date: Tue, 10 Dec 2002 18:20:51 -0800 [thread overview]
Message-ID: <20021210182051.X8642@mvista.com> (raw)
I am chasing a problem which might be a cache aliasing problem
when a disk file is opened with O_DIRECT flag.
I attached the source code of two programs. One generates a binary file
and the other opens the file with O_DIRECT and reads it. It checks
the content of the file while reading it.
I tested this on a MIPS board with NEC vr5432 CPU, which has a
virtually indexed, two-way set associative d-cache, and can easily
re-produce the data corruption problem.
I attached a patch which apparently solves the problem.
I am not an expert in fs and mm, but my guess is:
1) user process allocates a big buffer
2) the user buffer is mapped into kernel virtual space for doing direct IO
through map_user_kiobuf()
3) since the virtual address for buffer area is different in user space
from that in kernel virtual, kernel should do a flush cache for those
pages after doing the IO. That is why my attached patch makes it work.
Does this make sense?
However, I still have some puzzles. For it to work completely, another
cache flushing needs to be done for the address range of the buffer in user
space. I thought this should be done some where inside map_user_kiobuf()
but could not find it anywhere. Did I miss it? Or it just happens to work
even without it?
Another puzzling part is that I also tested the program on another couple
of MIPS boards which *should* suffer from this problem, but failed to
re-produce it.
Any thoughts?
Jun
next reply other threads:[~2002-12-11 2:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-11 2:20 Jun Sun [this message]
2002-12-11 2:32 ` possible cache aliasing problem with O_DIRECT? Jun Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021210182051.X8642@mvista.com \
--to=jsun@mvista.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox