From: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
To: lkml <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.4.21-pre1
Date: Wed, 11 Dec 2002 10:08:39 +0100 [thread overview]
Message-ID: <20021211090829.GD8741@charite.de> (raw)
In-Reply-To: <Pine.LNX.4.50L.0212101834240.23096-100000@freak.distro.conectiva>
* Marcelo Tosatti <marcelo@conectiva.com.br>:
> So here goes the first pre of 2.4.21 including the new IDE code merged
> from Alan's tree.
>
> Test it carefully, since the new IDE code is not yet fully tested.
And, alas, I do have problems with exactly that code. Background:
I've been trying the -ac kernels for quite some time now, but on my
new Toshiba Satellite Pro 6100 they all fail miserably.
I made three screenshots which illuminate the problem:
http://www.stahl.bau.tu-bs.de/~hildeb/kernel/
* 2.4.20/2.4.19/2.4.20-ck1 all boot OK, the old IDE code detects my drives.
* 2.4.19-acX, 2.4.20-ac1 or 2.4.21-pre1 boot, but then fail to detect my drives.
My /etc/lilo.conf contains as addiditonal boot parameters only:
append="hdc=ide-scsi max_scsi_luns=1 video=vesa:ywrap,mtrr"
lspci reports:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go] (rev a3)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller (rev 42)
02:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (rev 32)
02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (rev 32)
02:0d.0 System peripheral: Toshiba America Info Systems: Unknown device 0805 (rev 03)
--
Ralf Hildebrandt (Im Auftrag des Referat V a) Ralf.Hildebrandt@charite.de
Charite Campus Mitte Tel. +49 (0)30-450 570-155
Referat V a - Kommunikationsnetze - Fax. +49 (0)30-450 570-916
"Looking at the proliferation of personal web pages on the net, it
looks like very soon everyone on earth will have 15 Megabytes of fame."
-MG Siriam
next prev parent reply other threads:[~2002-12-11 9:00 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-10 20:37 Linux 2.4.21-pre1 Marcelo Tosatti
2002-12-11 1:14 ` Adrian Bunk
2002-12-11 8:55 ` Matthias Andree
2002-12-11 9:20 ` Marc-Christian Petersen
2002-12-11 9:08 ` Ralf Hildebrandt [this message]
2002-12-11 16:07 ` Alan Cox
2002-12-11 15:34 ` Ralf Hildebrandt
2002-12-11 15:56 ` Ralf Hildebrandt
2002-12-11 17:29 ` Alan Cox
2002-12-15 9:56 ` Ralf Hildebrandt
2002-12-16 6:34 ` Alan Cox
2002-12-17 8:02 ` Ralf Hildebrandt
2002-12-11 9:37 ` Linux 2.4.21-pre1 compile failure: drivers/net/pcmcia/fmvj18x_cs.c Eyal Lebedinsky
2002-12-11 12:51 ` Adrian Bunk
2002-12-11 10:50 ` Linux 2.4.21-pre1 - unresolved symbols: scx200_gpio.o Eyal Lebedinsky
2002-12-12 1:35 ` Linux 2.4.21-pre1 IDE Erik Andersen
2002-12-12 13:10 ` Alan Cox
2002-12-13 14:23 ` Tomas Szepe
2002-12-13 17:42 ` Alan Cox
-- strict thread matches above, loose matches on Subject: below --
2002-12-11 3:58 Linux 2.4.21-pre1 Alex Davis
2002-12-12 15:12 ` Adrian Bunk
2002-12-11 17:51 Petr Vandrovec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021211090829.GD8741@charite.de \
--to=ralf.hildebrandt@charite.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox