* [PATCH] C99 initializers for drivers/scsi (2 of 4)
@ 2002-12-12 14:06 Art Haas
0 siblings, 0 replies; only message in thread
From: Art Haas @ 2002-12-12 14:06 UTC (permalink / raw)
To: linux-kernel; +Cc: Linus Torvalds
Hi.
Here are some more patches for converting drivers/scsi to use C99
initializers. The patches are all against 2.5.51.
Art Haas
--- linux-2.5.51/drivers/scsi/dc390.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dc390.h 2002-12-10 14:28:33.000000000 -0600
@@ -52,41 +52,41 @@
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,30)
#define DC390_T { \
- proc_name: "tmscsim", \
- proc_info: DC390_proc_info, \
- name: DC390_BANNER " V" DC390_VERSION, \
- detect: DC390_detect, \
- release: DC390_release, \
- queuecommand: DC390_queue_command, \
- abort: DC390_abort, \
- reset: DC390_reset, \
- bios_param: DC390_bios_param, \
- can_queue: 42, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 16, \
- unchecked_isa_dma: 0, \
- use_clustering: DISABLE_CLUSTERING \
+ .proc_name = "tmscsim", \
+ .proc_info = DC390_proc_info, \
+ .name = DC390_BANNER " V" DC390_VERSION, \
+ .detect = DC390_detect, \
+ .release = DC390_release, \
+ .queuecommand = DC390_queue_command, \
+ .abort = DC390_abort, \
+ .reset = DC390_reset, \
+ .bios_param = DC390_bios_param, \
+ .can_queue = 42, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 16, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#else
extern struct proc_dir_entry DC390_proc_scsi_tmscsim;
#define DC390_T { \
- proc_dir: &DC390_proc_scsi_tmscsim, \
- proc_info: DC390_proc_info, \
- name: DC390_BANNER " V" DC390_VERSION, \
- detect: DC390_detect, \
- release: DC390_release, \
- queuecommand: DC390_queue_command, \
- abort: DC390_abort, \
- reset: DC390_reset, \
- bios_param: DC390_bios_param, \
- can_queue: 42, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 16, \
+ .proc_dir = &DC390_proc_scsi_tmscsim, \
+ .proc_info = DC390_proc_info, \
+ .name = DC390_BANNER " V" DC390_VERSION, \
+ .detect = DC390_detect, \
+ .release = DC390_release, \
+ .queuecommand = DC390_queue_command, \
+ .abort = DC390_abort, \
+ .reset = DC390_reset, \
+ .bios_param = DC390_bios_param, \
+ .can_queue = 42, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 16, \
NEW_EH \
- unchecked_isa_dma: 0, \
- use_clustering: DISABLE_CLUSTERING \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#endif
#endif /* defined(HOSTS_C) || defined(MODULE) */
--- linux-2.5.51/drivers/scsi/dec_esp.h.old 2002-07-05 18:42:05.000000000 -0500
+++ linux-2.5.51/drivers/scsi/dec_esp.h 2002-12-10 14:28:33.000000000 -0600
@@ -27,19 +27,19 @@
int hostno, int inout);
#define SCSI_DEC_ESP { \
- proc_name: "esp", \
- proc_info: &esp_proc_info, \
- name: "NCR53C94", \
- detect: dec_esp_detect, \
- info: esp_info, \
- command: esp_command, \
- queuecommand: esp_queue, \
- abort: esp_abort, \
- reset: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING, }
+ .proc_name = "esp", \
+ .proc_info = &esp_proc_info, \
+ .name = "NCR53C94", \
+ .detect = dec_esp_detect, \
+ .info = esp_info, \
+ .command = esp_command, \
+ .queuecommand = esp_queue, \
+ .abort = esp_abort, \
+ .reset = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING, }
#endif /* DEC_ESP_H */
--- linux-2.5.51/drivers/scsi/dmx3191d.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dmx3191d.h 2002-12-10 14:28:34.000000000 -0600
@@ -32,22 +32,22 @@
#define DMX3191D { \
- proc_info: dmx3191d_proc_info, \
- name: "Domex DMX3191D", \
- detect: dmx3191d_detect, \
- release: dmx3191d_release_resources, \
- info: dmx3191d_info, \
- queuecommand: dmx3191d_queue_command, \
- eh_abort_handler: dmx3191d_abort, \
- eh_bus_reset_handler: dmx3191d_bus_reset, \
- eh_device_reset_handler:dmx3191d_device_reset, \
- eh_host_reset_handler: dmx3191d_host_reset, \
- bios_param: NULL, \
- can_queue: 32, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 2, \
- use_clustering: DISABLE_CLUSTERING \
+ .proc_info = dmx3191d_proc_info, \
+ .name = "Domex DMX3191D", \
+ .detect = dmx3191d_detect, \
+ .release = dmx3191d_release_resources, \
+ .info = dmx3191d_info, \
+ .queuecommand = dmx3191d_queue_command, \
+ .eh_abort_handler = dmx3191d_abort, \
+ .eh_bus_reset_handler = dmx3191d_bus_reset, \
+ .eh_device_reset_handler = dmx3191d_device_reset, \
+ .eh_host_reset_handler = dmx3191d_host_reset, \
+ .bios_param = NULL, \
+ .can_queue = 32, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 2, \
+ .use_clustering = DISABLE_CLUSTERING \
}
--- linux-2.5.51/drivers/scsi/dpti.h.old 2002-11-29 09:24:17.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dpti.h 2002-12-10 14:28:32.000000000 -0600
@@ -62,44 +62,44 @@
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,00)
#define DPT_I2O { \
- proc_info: adpt_proc_info, \
- detect: adpt_detect, \
- release: adpt_release, \
- info: adpt_info, \
- queuecommand: adpt_queue, \
- eh_abort_handler: adpt_abort, \
- eh_device_reset_handler: adpt_device_reset, \
- eh_bus_reset_handler: adpt_bus_reset, \
- eh_host_reset_handler: adpt_reset, \
- bios_param: adpt_bios_param, \
- can_queue: MAX_TO_IOP_MESSAGES ,/* max simultaneous cmds */\
- this_id: 7, /* scsi id of host adapter */\
- sg_tablesize: 0, /* max scatter-gather cmds */\
- cmd_per_lun: 256, /* cmds per lun (linked cmds) */\
- use_clustering: ENABLE_CLUSTERING, \
- use_new_eh_code: 1 \
+ .proc_info = adpt_proc_info, \
+ .detect = adpt_detect, \
+ .release = adpt_release, \
+ .info = adpt_info, \
+ .queuecommand = adpt_queue, \
+ .eh_abort_handler = adpt_abort, \
+ .eh_device_reset_handler = adpt_device_reset, \
+ .eh_bus_reset_handler = adpt_bus_reset, \
+ .eh_host_reset_handler = adpt_reset, \
+ .bios_param = adpt_bios_param, \
+ .can_queue = MAX_TO_IOP_MESSAGES ,/* max simultaneous cmds */\
+ .this_id = 7, /* scsi id of host adapter */\
+ .sg_tablesize = 0, /* max scatter-gather cmds */\
+ .cmd_per_lun = 256, /* cmds per lun (linked cmds) */\
+ .use_clustering = ENABLE_CLUSTERING, \
+ .use_new_eh_code = 1 \
}
#else /* KERNEL_VERSION > 2.2.16 */
#define DPT_I2O { \
- proc_info: adpt_proc_info, \
- detect: adpt_detect, \
- release: adpt_release, \
- info: adpt_info, \
- queuecommand: adpt_queue, \
- eh_abort_handler: adpt_abort, \
- eh_device_reset_handler: adpt_device_reset, \
- eh_bus_reset_handler: adpt_bus_reset, \
- eh_host_reset_handler: adpt_reset, \
- bios_param: adpt_bios_param, \
- slave_configure: adpt_slave_configure, \
- can_queue: MAX_TO_IOP_MESSAGES, /* max simultaneous cmds */\
- this_id: 7, /* scsi id of host adapter */\
- sg_tablesize: 0, /* max scatter-gather cmds */\
- cmd_per_lun: 1, /* cmds per lun (linked cmds) */\
- use_clustering: ENABLE_CLUSTERING, \
- proc_name: "dpt_i2o" /* this is the name of our proc node*/ \
+ .proc_info = adpt_proc_info, \
+ .detect = adpt_detect, \
+ .release = adpt_release, \
+ .info = adpt_info, \
+ .queuecommand = adpt_queue, \
+ .eh_abort_handler = adpt_abort, \
+ .eh_device_reset_handler = adpt_device_reset, \
+ .eh_bus_reset_handler = adpt_bus_reset, \
+ .eh_host_reset_handler = adpt_reset, \
+ .bios_param = adpt_bios_param, \
+ .slave_configure = adpt_slave_configure, \
+ .can_queue = MAX_TO_IOP_MESSAGES, /* max simultaneous cmds */\
+ .this_id = 7, /* scsi id of host adapter */\
+ .sg_tablesize = 0, /* max scatter-gather cmds */\
+ .cmd_per_lun = 1, /* cmds per lun (linked cmds) */\
+ .use_clustering = ENABLE_CLUSTERING, \
+ .proc_name = "dpt_i2o" /* this is the name of our proc node*/ \
}
#endif
--- linux-2.5.51/drivers/scsi/dtc.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dtc.h 2002-12-10 14:28:33.000000000 -0600
@@ -54,19 +54,19 @@
*/
#define DTC3x80 { \
- name: "DTC 3180/3280 ", \
- detect: dtc_detect, \
- queuecommand: dtc_queue_command, \
- eh_abort_handler: dtc_abort, \
- eh_bus_reset_handler: dtc_bus_reset, \
- eh_device_reset_handler: dtc_device_reset, \
- eh_host_reset_handler: dtc_host_reset, \
- bios_param: dtc_biosparam, \
- can_queue: CAN_QUEUE, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: CMD_PER_LUN , \
- use_clustering: DISABLE_CLUSTERING}
+ .name = "DTC 3180/3280 ", \
+ .detect = dtc_detect, \
+ .queuecommand = dtc_queue_command, \
+ .eh_abort_handler = dtc_abort, \
+ .eh_bus_reset_handler = dtc_bus_reset, \
+ .eh_device_reset_handler = dtc_device_reset, \
+ .eh_host_reset_handler = dtc_host_reset, \
+ .bios_param = dtc_biosparam, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN , \
+ .use_clustering = DISABLE_CLUSTERING}
#define NCR5380_implementation_fields \
unsigned int base
--- linux-2.5.51/drivers/scsi/eata.h.old 2002-11-29 09:24:17.000000000 -0600
+++ linux-2.5.51/drivers/scsi/eata.h 2002-12-10 14:28:33.000000000 -0600
@@ -14,17 +14,17 @@
#define EATA_VERSION "8.00.00"
#define EATA { \
- name: "EATA/DMA 2.0x rev. " EATA_VERSION " ", \
- detect: eata2x_detect, \
- release: eata2x_release, \
- queuecommand: eata2x_queuecommand, \
- eh_abort_handler: eata2x_eh_abort, \
- eh_device_reset_handler: NULL, \
- eh_bus_reset_handler: NULL, \
- eh_host_reset_handler: eata2x_eh_host_reset, \
- bios_param: eata2x_bios_param, \
- slave_configure: eata2x_slave_configure, \
- this_id: 7, \
- unchecked_isa_dma: 1, \
- use_clustering: ENABLE_CLUSTERING \
+ .name = "EATA/DMA 2.0x rev. " EATA_VERSION " ", \
+ .detect = eata2x_detect, \
+ .release = eata2x_release, \
+ .queuecommand = eata2x_queuecommand, \
+ .eh_abort_handler = eata2x_eh_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = eata2x_eh_host_reset, \
+ .bios_param = eata2x_bios_param, \
+ .slave_configure = eata2x_slave_configure, \
+ .this_id = 7, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
}
--- linux-2.5.51/drivers/scsi/eata_dma.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/eata_dma.h 2002-12-10 14:28:35.000000000 -0600
@@ -81,15 +81,15 @@
#include <scsi/scsicam.h>
#define EATA_DMA { \
- proc_info: eata_proc_info, /* procinfo */ \
- name: "EATA (Extended Attachment) HBA driver", \
- detect: eata_detect, \
- release: eata_release, \
- queuecommand: eata_queue, \
- abort: eata_abort, \
- reset: eata_reset, \
- unchecked_isa_dma: 1, /* True if ISA */ \
- use_clustering: ENABLE_CLUSTERING }
+ .proc_info = eata_proc_info, /* procinfo */ \
+ .name = "EATA (Extended Attachment) HBA driver", \
+ .detect = eata_detect, \
+ .release = eata_release, \
+ .queuecommand = eata_queue, \
+ .abort = eata_abort, \
+ .reset = eata_reset, \
+ .unchecked_isa_dma = 1, /* True if ISA */ \
+ .use_clustering = ENABLE_CLUSTERING }
#endif /* _EATA_DMA_H */
--- linux-2.5.51/drivers/scsi/eata_pio.h.old 2002-11-11 07:14:45.000000000 -0600
+++ linux-2.5.51/drivers/scsi/eata_pio.h 2002-12-10 14:28:35.000000000 -0600
@@ -65,14 +65,14 @@
static int eata_pio_release(struct Scsi_Host *);
#define EATA_PIO { \
- proc_info: eata_pio_proc_info, /* procinfo */ \
- name: "EATA (Extended Attachment) PIO driver",\
- detect: eata_pio_detect, \
- release: eata_pio_release, \
- queuecommand: eata_pio_queue, \
- eh_abort_handler: eata_pio_abort, \
- eh_host_reset_handler: eata_pio_host_reset, \
- use_clustering: ENABLE_CLUSTERING \
+ .proc_info = eata_pio_proc_info, /* procinfo */ \
+ .name = "EATA (Extended Attachment) PIO driver",\
+ .detect = eata_pio_detect, \
+ .release = eata_pio_release, \
+ .queuecommand = eata_pio_queue, \
+ .eh_abort_handler = eata_pio_abort, \
+ .eh_host_reset_handler = eata_pio_host_reset, \
+ .use_clustering = ENABLE_CLUSTERING \
}
#endif /* _EATA_PIO_H */
--- linux-2.5.51/drivers/scsi/fastlane.h.old 2002-07-05 18:42:03.000000000 -0500
+++ linux-2.5.51/drivers/scsi/fastlane.h 2002-12-10 14:28:32.000000000 -0600
@@ -48,18 +48,18 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);
-#define SCSI_FASTLANE { proc_name: "esp-fastlane", \
- proc_info: esp_proc_info, \
- name: "Fastlane SCSI", \
- detect: fastlane_esp_detect, \
- release: fastlane_esp_release, \
- queuecommand: esp_queue, \
- abort: esp_abort, \
- reset: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_FASTLANE { .proc_name = "esp-fastlane", \
+ .proc_info = esp_proc_info, \
+ .name = "Fastlane SCSI", \
+ .detect = fastlane_esp_detect, \
+ .release = fastlane_esp_release, \
+ .queuecommand = esp_queue, \
+ .abort = esp_abort, \
+ .reset = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING }
#endif /* FASTLANE_H */
--- linux-2.5.51/drivers/scsi/fcal.h.old 2002-11-29 09:24:18.000000000 -0600
+++ linux-2.5.51/drivers/scsi/fcal.h 2002-12-10 14:28:32.000000000 -0600
@@ -26,21 +26,21 @@
int fcal_slave_configure(Scsi_Device *);
#define FCAL { \
- name: "Fibre Channel Arbitrated Loop",\
- detect: fcal_detect, \
- release: fcal_release, \
- proc_info: fcal_proc_info, \
- queuecommand: fcp_scsi_queuecommand, \
- slave_configure: fcal_slave_configure, \
- can_queue: FCAL_CAN_QUEUE, \
- this_id: -1, \
- sg_tablesize: 1, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING, \
- eh_abort_handler: fcp_scsi_abort, \
- eh_device_reset_handler:fcp_scsi_dev_reset, \
- eh_bus_reset_handler: fcp_scsi_bus_reset, \
- eh_host_reset_handler: fcp_scsi_host_reset, \
+ .name = "Fibre Channel Arbitrated Loop",\
+ .detect = fcal_detect, \
+ .release = fcal_release, \
+ .proc_info = fcal_proc_info, \
+ .queuecommand = fcp_scsi_queuecommand, \
+ .slave_configure = fcal_slave_configure, \
+ .can_queue = FCAL_CAN_QUEUE, \
+ .this_id = -1, \
+ .sg_tablesize = 1, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .eh_abort_handler = fcp_scsi_abort, \
+ .eh_device_reset_handler = fcp_scsi_dev_reset, \
+ .eh_bus_reset_handler = fcp_scsi_bus_reset, \
+ .eh_host_reset_handler = fcp_scsi_host_reset, \
}
#endif /* !(_FCAL_H) */
--- linux-2.5.51/drivers/scsi/fd_mcs.h.old 2002-11-11 07:14:46.000000000 -0600
+++ linux-2.5.51/drivers/scsi/fd_mcs.h 2002-12-10 14:28:33.000000000 -0600
@@ -36,23 +36,23 @@
static const char *fd_mcs_info(struct Scsi_Host *);
#define FD_MCS {\
- proc_name: "fd_mcs", \
- proc_info: fd_mcs_proc_info, \
- detect: fd_mcs_detect, \
- release: fd_mcs_release, \
- info: fd_mcs_info, \
- command: fd_mcs_command, \
- queuecommand: fd_mcs_queue, \
- eh_abort_handler: fd_mcs_abort, \
- eh_bus_reset_handler: fd_mcs_bus_reset, \
- eh_host_reset_handler: fd_mcs_host_reset, \
- eh_device_reset_handler: fd_mcs_device_reset, \
- bios_param: fd_mcs_biosparam, \
- can_queue: 1, \
- this_id: 7, \
- sg_tablesize: 64, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING \
+ .proc_name = "fd_mcs", \
+ .proc_info = fd_mcs_proc_info, \
+ .detect = fd_mcs_detect, \
+ .release = fd_mcs_release, \
+ .info = fd_mcs_info, \
+ .command = fd_mcs_command, \
+ .queuecommand = fd_mcs_queue, \
+ .eh_abort_handler = fd_mcs_abort, \
+ .eh_bus_reset_handler = fd_mcs_bus_reset, \
+ .eh_host_reset_handler = fd_mcs_host_reset, \
+ .eh_device_reset_handler = fd_mcs_device_reset, \
+ .bios_param = fd_mcs_biosparam, \
+ .can_queue = 1, \
+ .this_id = 7, \
+ .sg_tablesize = 64, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#endif /* _FD_MCS_H */
--- linux-2.5.51/drivers/scsi/fdomain.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/fdomain.h 2002-12-10 14:28:33.000000000 -0600
@@ -39,21 +39,21 @@
int length, int hostno, int inout );
static int fdomain_16x0_release(struct Scsi_Host *shpnt);
-#define FDOMAIN_16X0 { proc_info: fdomain_16x0_proc_info, \
- detect: fdomain_16x0_detect, \
- info: fdomain_16x0_info, \
- command: fdomain_16x0_command, \
- queuecommand: fdomain_16x0_queue, \
- eh_abort_handler: fdomain_16x0_abort, \
- eh_bus_reset_handler: fdomain_16x0_bus_reset, \
- eh_device_reset_handler: fdomain_16x0_device_reset, \
- eh_host_reset_handler: fdomain_16x0_host_reset, \
- bios_param: fdomain_16x0_biosparam, \
- release: fdomain_16x0_release, \
- can_queue: 1, \
- this_id: 6, \
- sg_tablesize: 64, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING \
+#define FDOMAIN_16X0 { .proc_info = fdomain_16x0_proc_info, \
+ .detect = fdomain_16x0_detect, \
+ .info = fdomain_16x0_info, \
+ .command = fdomain_16x0_command, \
+ .queuecommand = fdomain_16x0_queue, \
+ .eh_abort_handler = fdomain_16x0_abort, \
+ .eh_bus_reset_handler = fdomain_16x0_bus_reset, \
+ .eh_device_reset_handler = fdomain_16x0_device_reset, \
+ .eh_host_reset_handler = fdomain_16x0_host_reset, \
+ .bios_param = fdomain_16x0_biosparam, \
+ .release = fdomain_16x0_release, \
+ .can_queue = 1, \
+ .this_id = 6, \
+ .sg_tablesize = 64, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#endif
--- linux-2.5.51/drivers/scsi/g_NCR5380.h.old 2002-11-11 07:14:46.000000000 -0600
+++ linux-2.5.51/drivers/scsi/g_NCR5380.h 2002-12-10 14:28:32.000000000 -0600
@@ -66,22 +66,22 @@
#endif
#define GENERIC_NCR5380 { \
- proc_info: generic_NCR5380_proc_info, \
- name: "Generic NCR5380/NCR53C400 Scsi Driver", \
- detect: generic_NCR5380_detect, \
- release: generic_NCR5380_release_resources, \
- info: (void *)generic_NCR5380_info, \
- queuecommand: generic_NCR5380_queue_command, \
- eh_abort_handler:generic_NCR5380_abort, \
- eh_bus_reset_handler:generic_NCR5380_bus_reset, \
- eh_device_reset_handler:generic_NCR5380_device_reset, \
- eh_host_reset_handler:generic_NCR5380_host_reset, \
- bios_param: NCR5380_BIOSPARAM, \
- can_queue: CAN_QUEUE, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: CMD_PER_LUN , \
- use_clustering: DISABLE_CLUSTERING}
+ .proc_info = generic_NCR5380_proc_info, \
+ .name = "Generic NCR5380/NCR53C400 Scsi Driver", \
+ .detect = generic_NCR5380_detect, \
+ .release = generic_NCR5380_release_resources, \
+ .info = (void *)generic_NCR5380_info, \
+ .queuecommand = generic_NCR5380_queue_command, \
+ .eh_abort_handler = generic_NCR5380_abort, \
+ .eh_bus_reset_handler = generic_NCR5380_bus_reset, \
+ .eh_device_reset_handler = generic_NCR5380_device_reset, \
+ .eh_host_reset_handler = generic_NCR5380_host_reset, \
+ .bios_param = NCR5380_BIOSPARAM, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN , \
+ .use_clustering = DISABLE_CLUSTERING}
#ifndef HOSTS_C
--- linux-2.5.51/drivers/scsi/gdth.h.old 2002-10-31 16:20:05.000000000 -0600
+++ linux-2.5.51/drivers/scsi/gdth.h 2002-12-10 14:28:33.000000000 -0600
@@ -1037,28 +1037,28 @@
int gdth_eh_device_reset(Scsi_Cmnd *scp);
int gdth_eh_bus_reset(Scsi_Cmnd *scp);
int gdth_eh_host_reset(Scsi_Cmnd *scp);
-#define GDTH { proc_name: "gdth", \
- proc_info: gdth_proc_info, \
- name: "GDT SCSI Disk Array Controller",\
- detect: gdth_detect, \
- release: gdth_release, \
- info: gdth_info, \
- command: NULL, \
- queuecommand: gdth_queuecommand, \
- eh_abort_handler: gdth_eh_abort, \
- eh_device_reset_handler: gdth_eh_device_reset, \
- eh_bus_reset_handler: gdth_eh_bus_reset, \
- eh_host_reset_handler: gdth_eh_host_reset, \
- abort: gdth_abort, \
- reset: gdth_reset, \
- bios_param: gdth_bios_param, \
- can_queue: GDTH_MAXCMDS, \
- this_id: -1, \
- sg_tablesize: GDTH_MAXSG, \
- cmd_per_lun: GDTH_MAXC_P_L, \
- present: 0, \
- unchecked_isa_dma: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define GDTH { .proc_name = "gdth", \
+ .proc_info = gdth_proc_info, \
+ .name = "GDT SCSI Disk Array Controller",\
+ .detect = gdth_detect, \
+ .release = gdth_release, \
+ .info = gdth_info, \
+ .command = NULL, \
+ .queuecommand = gdth_queuecommand, \
+ .eh_abort_handler = gdth_eh_abort, \
+ .eh_device_reset_handler = gdth_eh_device_reset, \
+ .eh_bus_reset_handler = gdth_eh_bus_reset, \
+ .eh_host_reset_handler = gdth_eh_host_reset, \
+ .abort = gdth_abort, \
+ .reset = gdth_reset, \
+ .bios_param = gdth_bios_param, \
+ .can_queue = GDTH_MAXCMDS, \
+ .this_id = -1, \
+ .sg_tablesize = GDTH_MAXSG, \
+ .cmd_per_lun = GDTH_MAXC_P_L, \
+ .present = 0, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = ENABLE_CLUSTERING }
#endif
--- linux-2.5.51/drivers/scsi/gvp11.h.old 2002-07-05 18:42:33.000000000 -0500
+++ linux-2.5.51/drivers/scsi/gvp11.h 2002-12-10 14:28:34.000000000 -0600
@@ -32,18 +32,18 @@
#ifdef HOSTS_C
-#define GVP11_SCSI { proc_name: "GVP11", \
- name: "GVP Series II SCSI", \
- detect: gvp11_detect, \
- release: gvp11_release, \
- queuecommand: wd33c93_queuecommand, \
- abort: wd33c93_abort, \
- reset: wd33c93_reset, \
- can_queue: CAN_QUEUE, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: CMD_PER_LUN, \
- use_clustering: DISABLE_CLUSTERING }
+#define GVP11_SCSI { .proc_name = "GVP11", \
+ .name = "GVP Series II SCSI", \
+ .detect = gvp11_detect, \
+ .release = gvp11_release, \
+ .queuecommand = wd33c93_queuecommand, \
+ .abort = wd33c93_abort, \
+ .reset = wd33c93_reset, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN, \
+ .use_clustering = DISABLE_CLUSTERING }
#else
/*
--- linux-2.5.51/drivers/scsi/ibmmca.h.old 2002-11-18 01:02:09.000000000 -0600
+++ linux-2.5.51/drivers/scsi/ibmmca.h 2002-12-10 14:28:33.000000000 -0600
@@ -27,22 +27,22 @@
* about this, but it will break things in the future.
*/
#define IBMMCA { \
- proc_name: "ibmmca", /*proc_name*/ \
- proc_info: ibmmca_proc_info, /*proc info fn*/ \
- name: "IBM SCSI-Subsystem", /*name*/ \
- detect: ibmmca_detect, /*detect fn*/ \
- release: ibmmca_release, /*release fn*/ \
- command: ibmmca_command, /*command fn*/ \
- queuecommand: ibmmca_queuecommand, /*queuecommand fn*/ \
- eh_abort_handler:ibmmca_abort, /*abort fn*/ \
- eh_host_reset_handler:ibmmca_host_reset, /*reset fn*/ \
- bios_param: ibmmca_biosparam, /*bios fn*/ \
- can_queue: 16, /*can_queue*/ \
- this_id: 7, /*set by detect*/ \
- sg_tablesize: 16, /*sg_tablesize*/ \
- cmd_per_lun: 1, /*cmd_per_lun*/ \
- unchecked_isa_dma: 0, /*32-Bit Busmaster */ \
- use_clustering: ENABLE_CLUSTERING /*use_clustering*/ \
+ .proc_name = "ibmmca", /*proc_name*/ \
+ .proc_info = ibmmca_proc_info, /*proc info fn*/ \
+ .name = "IBM SCSI-Subsystem", /*name*/ \
+ .detect = ibmmca_detect, /*detect fn*/ \
+ .release = ibmmca_release, /*release fn*/ \
+ .command = ibmmca_command, /*command fn*/ \
+ .queuecommand = ibmmca_queuecommand, /*queuecommand fn*/ \
+ .eh_abort_handler = ibmmca_abort, /*abort fn*/ \
+ .eh_host_reset_handler = ibmmca_host_reset, /*reset fn*/ \
+ .bios_param = ibmmca_biosparam, /*bios fn*/ \
+ .can_queue = 16, /*can_queue*/ \
+ .this_id = 7, /*set by detect*/ \
+ .sg_tablesize = 16, /*sg_tablesize*/ \
+ .cmd_per_lun = 1, /*cmd_per_lun*/ \
+ .unchecked_isa_dma = 0, /*32-Bit Busmaster */ \
+ .use_clustering = ENABLE_CLUSTERING /*use_clustering*/ \
}
#endif /* _IBMMCA_H */
--- linux-2.5.51/drivers/scsi/imm.h.old 2002-10-31 16:20:05.000000000 -0600
+++ linux-2.5.51/drivers/scsi/imm.h 2002-12-10 14:28:32.000000000 -0600
@@ -163,21 +163,21 @@
int imm_biosparam(struct scsi_device *, struct block_device *,
sector_t, int *);
-#define IMM { proc_name: "imm", \
- proc_info: imm_proc_info, \
- name: "Iomega VPI2 (imm) interface",\
- detect: imm_detect, \
- release: imm_release, \
- command: imm_command, \
- queuecommand: imm_queuecommand, \
- eh_abort_handler: imm_abort, \
- eh_device_reset_handler: NULL, \
- eh_bus_reset_handler: imm_reset, \
- eh_host_reset_handler: imm_reset, \
- bios_param: imm_biosparam, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING \
+#define IMM { .proc_name = "imm", \
+ .proc_info = imm_proc_info, \
+ .name = "Iomega VPI2 (imm) interface",\
+ .detect = imm_detect, \
+ .release = imm_release, \
+ .command = imm_command, \
+ .queuecommand = imm_queuecommand, \
+ .eh_abort_handler = imm_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = imm_reset, \
+ .eh_host_reset_handler = imm_reset, \
+ .bios_param = imm_biosparam, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
}
#endif /* _IMM_H */
--- linux-2.5.51/drivers/scsi/in2000.h.old 2002-10-31 16:20:05.000000000 -0600
+++ linux-2.5.51/drivers/scsi/in2000.h 2002-12-10 14:28:32.000000000 -0600
@@ -414,22 +414,22 @@
#define IN2000_CPL 2
#define IN2000_HOST_ID 7
-#define IN2000 { proc_name: "in2000", /* name of /proc/scsi directory entry */ \
- proc_info: in2000_proc_info, /* pointer to proc info function */ \
- name: "Always IN2000", /* device name */ \
- detect: in2000_detect, /* returns number of in2000's found */ \
- release: in2000_release, /* release the in2000 controller */ \
- queuecommand: in2000_queuecommand, /* queue scsi command, don't wait */ \
- eh_abort_handler: in2000_abort, /* abort current command */ \
- eh_bus_reset_handler: in2000_bus_reset, /* reset scsi bus */ \
- eh_device_reset_handler: in2000_device_reset, /* reset scsi device */ \
- eh_host_reset_handler: in2000_host_reset, /* reset scsi hba */ \
- bios_param: in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \
- can_queue: IN2000_CAN_Q, /* max commands we can queue up */ \
- this_id: IN2000_HOST_ID, /* host-adapter scsi id */ \
- sg_tablesize: IN2000_SG, /* scatter-gather table size */ \
- cmd_per_lun: IN2000_CPL, /* commands per lun */ \
- use_clustering: DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \
+#define IN2000 { .proc_name = "in2000", /* name of /proc/scsi directory entry */ \
+ .proc_info = in2000_proc_info, /* pointer to proc info function */ \
+ .name = "Always IN2000", /* device name */ \
+ .detect = in2000_detect, /* returns number of in2000's found */ \
+ .release = in2000_release, /* release the in2000 controller */ \
+ .queuecommand = in2000_queuecommand, /* queue scsi command, don't wait */ \
+ .eh_abort_handler = in2000_abort, /* abort current command */ \
+ .eh_bus_reset_handler = in2000_bus_reset, /* reset scsi bus */ \
+ .eh_device_reset_handler = in2000_device_reset, /* reset scsi device */ \
+ .eh_host_reset_handler = in2000_host_reset, /* reset scsi hba */ \
+ .bios_param = in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \
+ .can_queue = IN2000_CAN_Q, /* max commands we can queue up */ \
+ .this_id = IN2000_HOST_ID, /* host-adapter scsi id */ \
+ .sg_tablesize = IN2000_SG, /* scatter-gather table size */ \
+ .cmd_per_lun = IN2000_CPL, /* commands per lun */ \
+ .use_clustering = DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \
}
#endif /* IN2000_H */
--- linux-2.5.51/drivers/scsi/ini9100u.h.old 2002-11-29 09:24:18.000000000 -0600
+++ linux-2.5.51/drivers/scsi/ini9100u.h 2002-12-10 14:28:34.000000000 -0600
@@ -88,31 +88,31 @@
#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g"
#define INI9100U { \
- next: NULL, \
- module: NULL, \
- proc_name: "INI9100U", \
- proc_info: NULL, \
- name: i91u_REVID, \
- detect: i91u_detect, \
- release: i91u_release, \
- info: NULL, \
- command: i91u_command, \
- queuecommand: i91u_queue, \
- eh_strategy_handler: NULL, \
- eh_abort_handler: NULL, \
- eh_device_reset_handler: NULL, \
- eh_bus_reset_handler: NULL, \
- eh_host_reset_handler: NULL, \
- abort: i91u_abort, \
- reset: i91u_reset, \
- bios_param: i91u_biosparam, \
- can_queue: 1, \
- this_id: 1, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- present: 0, \
- unchecked_isa_dma: 0, \
- use_clustering: ENABLE_CLUSTERING, \
+ .next = NULL, \
+ .module = NULL, \
+ .proc_name = "INI9100U", \
+ .proc_info = NULL, \
+ .name = i91u_REVID, \
+ .detect = i91u_detect, \
+ .release = i91u_release, \
+ .info = NULL, \
+ .command = i91u_command, \
+ .queuecommand = i91u_queue, \
+ .eh_strategy_handler = NULL, \
+ .eh_abort_handler = NULL, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = NULL, \
+ .abort = i91u_abort, \
+ .reset = i91u_reset, \
+ .bios_param = i91u_biosparam, \
+ .can_queue = 1, \
+ .this_id = 1, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
}
#define VIRT_TO_BUS(i) (unsigned int) virt_to_bus((void *)(i))
--- linux-2.5.51/drivers/scsi/inia100.h.old 2002-11-29 09:24:18.000000000 -0600
+++ linux-2.5.51/drivers/scsi/inia100.h 2002-12-10 14:28:32.000000000 -0600
@@ -85,21 +85,21 @@
#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"
#define INIA100 { \
- proc_name: "inia100", \
- name: inia100_REVID, \
- detect: inia100_detect, \
- release: inia100_release, \
- queuecommand: inia100_queue, \
- eh_abort_handler:inia100_abort, \
- eh_bus_reset_handler: inia100_bus_reset, \
- eh_device_reset_handler:inia100_device_reset, \
- can_queue: 1, \
- this_id: 1, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- present: 0, \
- unchecked_isa_dma: 0, \
- use_clustering: ENABLE_CLUSTERING, \
+ .proc_name = "inia100", \
+ .name = inia100_REVID, \
+ .detect = inia100_detect, \
+ .release = inia100_release, \
+ .queuecommand = inia100_queue, \
+ .eh_abort_handler = inia100_abort, \
+ .eh_bus_reset_handler = inia100_bus_reset, \
+ .eh_device_reset_handler = inia100_device_reset, \
+ .can_queue = 1, \
+ .this_id = 1, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
}
#define ULONG unsigned long
--- linux-2.5.51/drivers/scsi/ips.h.old 2002-11-29 09:24:19.000000000 -0600
+++ linux-2.5.51/drivers/scsi/ips.h 2002-12-10 14:28:33.000000000 -0600
@@ -407,80 +407,80 @@
* Scsi_Host Template
*/
#if LINUX_VERSION_CODE < LinuxVersionCode(2,4,0)
- #define IPS { \
- module : NULL, \
- proc_info : NULL, \
- proc_dir : NULL, \
- name : NULL, \
- detect : ips_detect, \
- release : ips_release, \
- info : ips_info, \
- command : NULL, \
- queuecommand : ips_queue, \
- eh_strategy_handler : NULL, \
- eh_abort_handler : ips_eh_abort, \
- eh_device_reset_handler : NULL, \
- eh_bus_reset_handler : NULL, \
- eh_host_reset_handler : ips_eh_reset, \
- abort : NULL, \
- reset : NULL, \
- slave_attach : NULL, \
- bios_param : ips_biosparam, \
- can_queue : 0, \
- this_id: -1, \
- sg_tablesize : IPS_MAX_SG, \
- cmd_per_lun: 3, \
- present : 0, \
- unchecked_isa_dma : 0, \
- use_clustering : ENABLE_CLUSTERING, \
- use_new_eh_code : 1 \
+#define IPS { \
+ .module = NULL, \
+ .proc_info = NULL, \
+ .proc_dir = NULL, \
+ .name = NULL, \
+ .detect = ips_detect, \
+ .release = ips_release, \
+ .info = ips_info, \
+ .command = NULL, \
+ .queuecommand = ips_queue, \
+ .eh_strategy_handler = NULL, \
+ .eh_abort_handler = ips_eh_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = ips_eh_reset, \
+ .abort = NULL, \
+ .reset = NULL, \
+ .slave_attach = NULL, \
+ .bios_param = ips_biosparam,\
+ .can_queue = 0, \
+ .this_id = -1, \
+ .sg_tablesize = IPS_MAX_SG, \
+ .cmd_per_lun = 3, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .use_new_eh_code = 1 \
}
#elif LINUX_VERSION_CODE < LinuxVersionCode(2,5,0)
- #define IPS { \
- module : NULL, \
- proc_info : NULL, \
- name : NULL, \
- detect : ips_detect, \
- release : ips_release, \
- info : ips_info, \
- command : NULL, \
- queuecommand : ips_queue, \
- eh_strategy_handler : NULL, \
- eh_abort_handler : ips_eh_abort, \
- eh_device_reset_handler : NULL, \
- eh_bus_reset_handler : NULL, \
- eh_host_reset_handler : ips_eh_reset, \
- abort : NULL, \
- reset : NULL, \
- slave_attach : NULL, \
- bios_param : ips_biosparam, \
- can_queue : 0, \
- this_id: -1, \
- sg_tablesize : IPS_MAX_SG, \
- cmd_per_lun: 3, \
- present : 0, \
- unchecked_isa_dma : 0, \
- use_clustering : ENABLE_CLUSTERING, \
- use_new_eh_code : 1 \
+#define IPS{ \
+ .module = NULL, \
+ .proc_info = NULL, \
+ .name = NULL, \
+ .detect = ips_detect, \
+ .release = ips_release, \
+ .info = ips_info, \
+ .command = NULL, \
+ .queuecommand = ips_queue, \
+ .eh_strategy_handler = NULL, \
+ .eh_abort_handler = ips_eh_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = ips_eh_reset, \
+ .abort = NULL, \
+ .reset = NULL, \
+ .slave_attach = NULL, \
+ .bios_param = ips_biosparam,\
+ .can_queue = 0, \
+ .this_id = -1, \
+ .sg_tablesize = IPS_MAX_SG, \
+ .cmd_per_lun = 3, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING,\
+ .use_new_eh_code = 1 \
}
#else
- #define IPS { \
- detect : ips_detect, \
- release : ips_release, \
- info : ips_info, \
- queuecommand : ips_queue, \
- eh_abort_handler : ips_eh_abort, \
- eh_host_reset_handler : ips_eh_reset, \
- slave_configure : ips_slave_configure,\
- bios_param : ips_biosparam, \
- can_queue : 0, \
- this_id: -1, \
- sg_tablesize : IPS_MAX_SG, \
- cmd_per_lun: 3, \
- present : 0, \
- unchecked_isa_dma : 0, \
- use_clustering : ENABLE_CLUSTERING, \
- highmem_io : 1 \
+#define IPS { \
+ .detect = ips_detect, \
+ .release = ips_release, \
+ .info = ips_info, \
+ .queuecommand = ips_queue, \
+ .eh_abort_handler = ips_eh_abort, \
+ .eh_host_reset_handler = ips_eh_reset, \
+ .slave_configure = ips_slave_configure, \
+ .bios_param = ips_biosparam, \
+ .can_queue = 0, \
+ .this_id = -1, \
+ .sg_tablesize = IPS_MAX_SG, \
+ .cmd_per_lun = 3, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .highmem_io = 1 \
}
#endif
--
They that can give up essential liberty to obtain a little temporary safety
deserve neither liberty nor safety.
-- Benjamin Franklin, Historical Review of Pennsylvania, 1759
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-12-12 13:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-12-12 14:06 [PATCH] C99 initializers for drivers/scsi (2 of 4) Art Haas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox