From: Paul <set@pobox.com>
To: Dave Jones <davej@codemonkey.org.uk>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [Oops 2.5.51] PnPBIOS: cat /proc/bus/pnp/escd
Date: Mon, 16 Dec 2002 17:46:08 -0500 [thread overview]
Message-ID: <20021216224608.GA29852@squish.home.loc> (raw)
In-Reply-To: <20021216135813.GD11616@suse.de>
Dave Jones <davej@codemonkey.org.uk>, on Mon Dec 16, 2002 [01:58:13 PM] said:
> > 'cat /proc/bus/pnp/escd' consistantly produces this:
>
> > EIP: 0088:[<00007b74>] Not tainted
>
> You blew up in BIOS code. Your BIOS has a crap PNPBIOS implementation.
> Send the output of dmidecode[1] and it can get added to the blacklist.
>
> [1] http://people.redhat.com/arjanv/dmidecode.c
>
> Dave
>
Hi;
DMI 2.0 present.
29 structures occupying 946 bytes.
DMI table at 0x000F545A.
Handle 0x0000
DMI type 0, 18 bytes.
BIOS Information Block
Vendor: Award Software, Inc.
Version: ASUS P5A-B ACPI BIOS Revision 1004
Release: 10/14/98
BIOS base: 0xF0000
ROM size: 64K
Capabilities:
Flags: 0x000000007FDBDE90
Handle 0x0001
DMI type 1, 8 bytes.
System Information Block
Vendor: System Manufacturer
Product: System Name
Version: System Version
Serial Number: SYS-1234567890
Handle 0x0002
DMI type 2, 8 bytes.
Board Information Block
Vendor: ASUSTeK Computer INC.
Product: P5A-B
Version: REV 1.XX
Serial Number: MB-1234567890
Handle 0x0003
DMI type 3, 9 bytes.
Chassis Information Block
Vendor: Chassis Manufacture
Chassis Type: Unknown
Version: Chassis Version
Serial Number: Chassis Serial Number
Asset Tag: Asset-1234567890
Handle 0x0004
DMI type 4, 26 bytes.
Processor
Socket Designation: SOCKET 7
Processor Type: Central Processor
Processor Family: K5 Family
Processor Manufacturer: AMD
Processor Version: AMD K6-2
Handle 0x0005
DMI type 5, 27 bytes.
Memory Controller
Handle 0x0007
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM1-2
Banks: 0 1
Speed: 70nS
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Handle 0x0008
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM2-1
Banks: 2 3
Speed: 70nS
Type: OTHER DIMM
Installed Size: 64Mbyte
Enabled Size: 64Mbyte
Handle 0x0009
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM2-2
Banks: 2 3
Speed: 70nS
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Handle 0x000A
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM3-1
Banks: 4 5
Speed: 70nS
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Handle 0x000B
DMI type 6, 12 bytes.
Memory Bank
Socket: DIMM3-2
Banks: 4 5
Speed: 70nS
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Handle 0x000C
DMI type 7, 15 bytes.
Cache
Socket: L1 Cache
L1 Internal Cache: write-back
L1 Cache Size: 64K
L1 Cache Maximum: 64K
L1 Cache Type:
Handle 0x000D
DMI type 7, 15 bytes.
Cache
Socket: L2 Cache
L2 External Cache: write-back
L2 Cache Size: 1024K
L2 Cache Maximum: 0K
L2 Cache Type: Pipeline burst
Handle 0x000E
DMI type 8, 9 bytes.
Port Connector
Internal Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Designator: COM A
External Connector Type: DB-9 pin male
Port Type: Serial Port 16650A Compatible
Handle 0x000F
DMI type 8, 9 bytes.
Port Connector
Internal Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Designator: COM B
External Connector Type: DB-25 pin male
Port Type: Serial Port 16650A Compatible
Handle 0x0010
DMI type 8, 9 bytes.
Port Connector
Internal Designator: PRINTER
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
External Designator: LPT
External Connector Type: DB-25 pin female
Port Type: Parallel Port ECP/EPP
Handle 0x0011
DMI type 8, 9 bytes.
Port Connector
Internal Designator: KEY
Internal Connector Type: None
External Designator: KEYBOARD
External Connector Type: Micro-DIN
Port Type: Keyboard Port
Handle 0x0012
DMI type 8, 9 bytes.
Port Connector
Internal Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Designator: IDE-1
External Connector Type: None
Port Type: None
Handle 0x0013
DMI type 8, 9 bytes.
Port Connector
Internal Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Designator: IDE-2
External Connector Type: None
Port Type: None
Handle 0x0014
DMI type 8, 9 bytes.
Port Connector
Internal Designator: FLOPPY
Internal Connector Type: On Board Floppy
External Designator: FLOPPY
External Connector Type: None
Port Type: None
Handle 0x0015
DMI type 9, 12 bytes.
Card Slot
Slot: PCI Slot1
Type: 32bit PCI
Status: In use.
Slot Features: 5v
Handle 0x0016
DMI type 9, 12 bytes.
Card Slot
Slot: PCI Slot2
Type: 32bit PCI
Status: Available.
Slot Features: 5v
Handle 0x0017
DMI type 9, 12 bytes.
Card Slot
Slot: PCI Slot3
Type: 32bit PCI
Status: Available.
Slot Features: 5v Shared
Handle 0x0018
DMI type 9, 12 bytes.
Card Slot
Slot: ISA Slot1
Type: 16bit ISA
Slot Features: 5v Shared
Handle 0x0019
DMI type 9, 12 bytes.
Card Slot
Slot: ISA Slot2
Type: 16bit ISA
Slot Features: 5v
Handle 0x001A
DMI type 11, 5 bytes.
OEM Data
OEM String
Handle 0x001B
DMI type 12, 5 bytes.
Configuration Information
System String
Handle 0x001C
DMI type 13, 22 bytes.
BIOS Language Information
Handle 0x0C49
DMI type 0, 0 bytes.
BIOS Information Block
Vendor:
Version:
Release:
BIOS base: 0x00000
ROM size: 0K
Capabilities:
Flags: 0x0000000000000000
prev parent reply other threads:[~2002-12-16 22:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-15 23:03 [Oops 2.5.51] PnPBIOS: cat /proc/bus/pnp/escd Paul
2002-12-15 23:39 ` John Bradford
2002-12-15 23:36 ` Paul
2002-12-16 13:58 ` Dave Jones
2002-12-16 14:57 ` Re[2]: " Ruslan U. Zakirov
2002-12-16 22:46 ` Paul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021216224608.GA29852@squish.home.loc \
--to=set@pobox.com \
--cc=davej@codemonkey.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox