public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kronos <kronos@kronoz.cjb.net>
To: linux-kernel@vger.kernel.org
Subject: [2.5.53] Cannot open root device
Date: Tue, 24 Dec 2002 14:19:57 +0100	[thread overview]
Message-ID: <20021224131957.GA549@dreamland.darkstar.lan> (raw)

I have some problems booting kernel 2.5.53, it seems to be unable to
find my root fs:

VFS: Cannot open root device "305" or 03:05

The kernel is booted via lilo:

image = /boot/bzImage-2.5.53
        root = /dev/hda5
        label = linux-2.5.53
        read-only

Appending "root=/dev/hda5" or "root=305" at command line doesn't work. I
was able to boot only using root=/dev/ide/host0/bus0/taget0/lun0/part5.

devsfs  is automatically  mounted at  boot, but  appending devfs=nomount
doesn't change anything.

I have also an other problem that can be related to this:

/dev/hda5 on / type ext2 (rw)
mount: /dev/hda6 has wrong device number or fs type reiserfs not supported.
mount: /dev/hda7 has wrong device number or fs type xfs not supported.

Both reiserfs and xfs are compiled as module (yes, I'm using module-init
0.9.5). I can  mount hda6 and  hda7 from the  shell and the  modules are
loaded automatically.

2.5.52 shows the same behaviour, 2.5.49 worked fine. Didn't tried 2.5.50
and 2.5.51.

I'm a bit confused...

Luca
-- 
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
"It is more complicated than you think"
                -- The Eighth Networking Truth from RFC 1925

             reply	other threads:[~2002-12-24 13:11 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-24 13:19 Kronos [this message]
2002-12-24 15:16 ` [2.5.53] Cannot open root device Andrew Morton
2002-12-24 15:42   ` Kronos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20021224131957.GA549@dreamland.darkstar.lan \
    --to=kronos@kronoz.cjb.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox