es1371 driver: ensoniq 5880 distortion

es1371 driver: ensoniq 5880 distortion

[Tom Vier]

i have an sb card that uses a 5880. all output from the card is distorted,
regardless of which output i use, what volume i set the card at, and what i
play (cat english.au and xmms playing mp3s).

does anyone else have this problem?

-- 
Tom Vier <tmv@comcast.net>
DSA Key ID 0xE6CB97DA

Re: es1371 driver: ensoniq 5880 distortion

[Tom Vier]

On Sun, Dec 29, 2002 at 12:47:40PM +0100, Rudmer van Dijk wrote:
> On Sunday 29 December 2002 02:13, Tom Vier wrote:
> > i have an sb card that uses a 5880. all output from the card is distorted,
> > regardless of which output i use, what volume i set the card at, and what i
> > play (cat english.au and xmms playing mp3s).
> 
> this is my soundcard (from lspci -v):
> 00:0f.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
>         Subsystem: Ensoniq Creative Sound Blaster AudioPCI128

exactly the same as mine.

>         Flags: bus master, slow devsel, latency 64, IRQ 5
>         I/O ports at d800 [size=64]
>         Capabilities: <available only to root>
> 
> I'm using alsa on 2.5.5x and alsa-0.9 on 2.4.2x and all works fine... so what 
> kernel(s) are you using and do you have OSS or ALSA drivers??

2.4.20 to 21-pre2. alsa, i guess. in menuconfig, i just selected sound card
support (CONFIG_SOUND) and es1371 support (CONFIG_SOUND_ES1371).
CONFIG_SOUND_OSS is not set.

-- 
Tom Vier <tmv@comcast.net>
DSA Key ID 0xE6CB97DA

Re: es1371 driver: ensoniq 5880 distortion

[Rudmer van Dijk]

On Sunday 29 December 2002 02:13, Tom Vier wrote:
> i have an sb card that uses a 5880. all output from the card is distorted,
> regardless of which output i use, what volume i set the card at, and what i
> play (cat english.au and xmms playing mp3s).

this is my soundcard (from lspci -v):
00:0f.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
        Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
        Flags: bus master, slow devsel, latency 64, IRQ 5
        I/O ports at d800 [size=64]
        Capabilities: <available only to root>

I'm using alsa on 2.5.5x and alsa-0.9 on 2.4.2x and all works fine... so what 
kernel(s) are you using and do you have OSS or ALSA drivers??

        Rudmer