From: Christoph Hellwig <hch@lst.de>
To: torvalds@transmeta.com, james.bottomley@steeleye.com
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] rename CONFIG_VOYAGER to CONFIG_X86_VOYAGER
Date: Mon, 30 Dec 2002 21:50:18 +0100 [thread overview]
Message-ID: <20021230215018.A20215@lst.de> (raw)
The name is just a bit too generic, and we already use the _X86 prefix
for lots of other stuff in that area. Dito for the never use CONFIG_PC
and CONFIG_VISWS.
--- 1.22/arch/i386/Kconfig Sun Dec 29 21:03:34 2002
+++ edited/arch/i386/Kconfig Mon Dec 30 11:51:41 2002
@@ -42,12 +42,12 @@
prompt "Subarchitecture Type"
default PC
-config PC
+config X86_PC
bool "IBM PC (and compatible)"
help
Choose this option if your computer is a standard PC or compatible.
-config VOYAGER
+config X86_VOYAGER
bool "NCR Voyager"
help
Voyager is a MCA based 32 way capable SMP architecture proprietary
@@ -407,7 +407,7 @@
config X86_UP_APIC
bool "Local APIC support on uniprocessors" if !SMP
- depends on !VOYAGER
+ depends on !X86_VOYAGER
---help---
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
@@ -737,7 +737,7 @@
menu "Power management options (ACPI, APM)"
- depends on !VOYAGER
+ depends on !X86_VOYAGER
config PM
bool "Power Management support"
@@ -1040,18 +1040,18 @@
config X86_VISWS_APIC
bool
- depends on VISWS
+ depends on X86_VISWS
default y
config X86_LOCAL_APIC
bool
- depends on ((!VISWS && SMP) || VISWS) && !VOYAGER
+ depends on (X86_VISWS || SMP) && !X86_VOYAGER
default y
config PCI
- bool "PCI support" if !VISWS
- depends on !VOYAGER
- default y if VISWS
+ bool "PCI support" if !X86_VISWS
+ depends on !X86_VOYAGER
+ default y if X86_VISWS
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1065,12 +1065,12 @@
config X86_IO_APIC
bool
- depends on !VISWS && SMP && !VOYAGER
+ depends on SMP && !(X86_VISWS || X86_VOYAGER)
default y
choice
prompt "PCI access mode"
- depends on !VISWS && PCI
+ depends on PCI && !X86_VISWS
default PCI_GOANY
config PCI_GOBIOS
@@ -1099,17 +1099,17 @@
config PCI_BIOS
bool
- depends on !VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+ depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
default y
config PCI_DIRECT
bool
- depends on !VISWS && PCI && (PCI_GODIRECT || PCI_GOANY)
+ depends on !X86_VISWS && PCI && (PCI_GODIRECT || PCI_GOANY)
default y
config SCx200
tristate "NatSemi SCx200 support"
- depends on !VOYAGER
+ depends on !X86_VOYAGER
help
This provides basic support for the National Semiconductor SCx200
processor. Right now this is just a driver for the GPIO pins.
@@ -1123,7 +1123,7 @@
config ISA
bool "ISA support"
- depends on !VOYAGER
+ depends on !(X86_VOYAGER || X86_VISWS)
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1149,7 +1149,7 @@
config MCA
bool "MCA support"
- depends on !VISWS && !VOYAGER
+ depends on !(X86_VISWS || X86_VOYAGER)
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
@@ -1157,8 +1157,8 @@
there) before attempting to build an MCA bus kernel.
config MCA
- depends on VOYAGER
- default y if VOYAGER
+ depends on X86_VOYAGER
+ default y if X86_VOYAGER
source "drivers/mca/Kconfig"
@@ -1626,12 +1626,12 @@
config X86_EXTRA_IRQS
bool
- depends on X86_LOCAL_APIC || VOYAGER
+ depends on X86_LOCAL_APIC || X86_VOYAGER
default y
config X86_FIND_SMP_CONFIG
bool
- depends on X86_LOCAL_APIC || VOYAGER
+ depends on X86_LOCAL_APIC || X86_VOYAGER
default y
config X86_MPPARSE
@@ -1649,17 +1649,17 @@
config X86_SMP
bool
- depends on SMP && !VOYAGER
+ depends on SMP && !X86_VOYAGER
default y
config X86_HT
bool
- depends on SMP && !VOYAGER
+ depends on SMP && !X86_VOYAGER
default y
config X86_BIOS_REBOOT
bool
- depends on !VOYAGER
+ depends on !X86_VOYAGER
default y
config X86_TRAMPOLINE
===== arch/i386/Makefile 1.36 vs edited =====
--- 1.36/arch/i386/Makefile Sat Dec 28 23:04:12 2002
+++ edited/arch/i386/Makefile Mon Dec 30 11:45:16 2002
@@ -49,24 +49,22 @@
CFLAGS += $(cflags-y)
-#default subarch .c files
+# Default subarch .c files
mcore-y := mach-default
-#Voyager subarch support
-mflags-$(CONFIG_VOYAGER) := -Iinclude/asm-i386/mach-voyager
-mcore-$(CONFIG_VOYAGER) := mach-voyager
+# Voyager subarch support
+mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-i386/mach-voyager
+mcore-$(CONFIG_X86_VOYAGER) := mach-voyager
-#VISWS subarch support
-mflags-$(CONFIG_VISWS) := -Iinclude/asm-i386/mach-visws
-mcore-$(CONFIG_VISWS) := mach-visws
+# VISWS subarch support
+mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-i386/mach-visws
+mcore-$(CONFIG_X86_VISWS) := mach-visws
-#NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := mach-default
+# NUMAQ subarch support
+mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ) := mach-default
-#add other subarch support here
-
-#default subarch .h files
+# default subarch .h files
mflags-y += -Iinclude/asm-i386/mach-default
HEAD := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
===== arch/i386/boot/setup.S 1.18 vs edited =====
--- 1.18/arch/i386/boot/setup.S Sat Dec 28 12:18:50 2002
+++ edited/arch/i386/boot/setup.S Mon Dec 30 11:44:05 2002
@@ -476,7 +476,7 @@
movsb
popw %ds
no_mca:
-#ifdef CONFIG_VOYAGER
+#ifdef CONFIG_X86_VOYAGER
movb $0xff, 0x40 # flag on config found
movb $0xc0, %al
mov $0xff, %ah
@@ -758,7 +758,7 @@
A20_ENABLE_LOOPS = 255 # Total loops to try
-#ifndef CONFIG_VOYAGER
+#ifndef CONFIG_X86_VOYAGER
a20_try_loop:
# First, see if we are on a system with no A20 gate.
@@ -777,11 +777,11 @@
jnz a20_done
# Try enabling A20 through the keyboard controller
-#endif /* CONFIG_VOYAGER */
+#endif /* CONFIG_X86_VOYAGER */
a20_kbc:
call empty_8042
-#ifndef CONFIG_VOYAGER
+#ifndef CONFIG_X86_VOYAGER
call a20_test # Just in case the BIOS worked
jnz a20_done # but had a delayed reaction.
#endif
@@ -794,7 +794,7 @@
outb %al, $0x60
call empty_8042
-#ifndef CONFIG_VOYAGER
+#ifndef CONFIG_X86_VOYAGER
# Wait until a20 really *is* enabled; it can take a fair amount of
# time on certain systems; Toshiba Tecras are known to have this
# problem.
@@ -842,7 +842,7 @@
# If we get here, all is good
a20_done:
-#endif /* CONFIG_VOYAGER */
+#endif /* CONFIG_X86_VOYAGER */
# set up gdt and idt
lidt idt_48 # load idt with 0,0
xorl %eax, %eax # Compute gdt_base
@@ -1009,7 +1009,7 @@
.string "INT15 refuses to access high mem, giving up."
-#ifndef CONFIG_VOYAGER
+#ifndef CONFIG_X86_VOYAGER
# This routine tests whether or not A20 is enabled. If so, it
# exits with zf = 0.
#
@@ -1040,7 +1040,7 @@
popw %cx
ret
-#endif /* CONFIG_VOYAGER */
+#endif /* CONFIG_X86_VOYAGER */
# This routine checks that the keyboard command queue is empty
# (after emptying the output buffers)
next reply other threads:[~2002-12-30 20:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-30 20:50 Christoph Hellwig [this message]
2002-12-30 21:44 ` [PATCH] rename CONFIG_VOYAGER to CONFIG_X86_VOYAGER Christoph Hellwig
2002-12-30 21:56 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021230215018.A20215@lst.de \
--to=hch@lst.de \
--cc=james.bottomley@steeleye.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox