From: John Bradford <john@grabjohn.com>
To: rbroman@bayarea.net (Randy Broman)
Cc: linux-kernel@vger.kernel.org
Subject: Re: RH73 Promise ATA/133 Install Problems
Date: Sat, 4 Jan 2003 18:59:36 +0000 (GMT) [thread overview]
Message-ID: <200301041859.h04IxaGQ002334@darkstar.example.net> (raw)
In-Reply-To: <3E172D5B.70402@bayarea.net> from "Randy Broman" at Jan 04, 2003 10:52:11 AM
> I have a Gigabyte GA-7VRXP motherboard which has an on-board
> Promise 20276 ATA133/RAID controller. I want to install RH73, on the
> two ATA133 drives connected to the Promise controller. I've set up
> the motherboard BIOS with the Promise 20276 interfaces as ATA (not
> RAID), and I want to install on the two drives in a software RAID
> configuration.
>
> If I start the standard RH73 install it does not identify the two drives
> connected to the Promise interfaces.
Support for the Promise 20276 went in to the kernel at 2.4.19-pre6.
Can you get to a command prompt and post the output of lspci -v -v?
Maybe it has a non standard PCI id and is not being recognised.
John.
next prev parent reply other threads:[~2003-01-04 18:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-04 18:52 RH73 Promise ATA/133 Install Problems Randy Broman
2003-01-04 18:59 ` John Bradford [this message]
2003-01-04 19:31 ` Randy Broman
2003-01-04 19:37 ` John Bradford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200301041859.h04IxaGQ002334@darkstar.example.net \
--to=john@grabjohn.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rbroman@bayarea.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox