* [PATCH] i2c-isa and w83871d sensors support
2002-12-28 12:36 ` Christoph Hellwig
@ 2003-01-05 17:44 ` GertJan Spoelman
2003-01-11 8:22 ` Christoph Hellwig
2003-01-05 19:34 ` [PATCH] amd756 and amd8111 " Pavel Machek
1 sibling, 1 reply; 5+ messages in thread
From: GertJan Spoelman @ 2003-01-05 17:44 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: Christoph Hellwig
This patch adds the i2c-isa pseudo ISA adapter and the w8387* series
sensors support to 2.5.54 (tested on bk1 and bk3).
I've just took the code from the lm_sensor package and changed it
to be more or less consistent with the lm75 and amd* patches Christoph
has done.
Christoph, maybe you could check this because I don't really understand
all of the code and maybe it needs some more changes.
GertJan
diff -Nru linux-2.5.54-bk1/drivers/i2c/busses/Kconfig linux-2.5.54/drivers/i2c/busses/Kconfig
--- linux-2.5.54-bk1/drivers/i2c/busses/Kconfig 2003-01-04 23:22:36.000000000 +0100
+++ linux-2.5.54/drivers/i2c/busses/Kconfig 2003-01-04 15:37:41.000000000 +0100
@@ -39,5 +39,23 @@
in the lm_sensors package, which you can download at
http://www.lm-sensors.nu
+config I2C_ISA
+ tristate " Pseudo ISA adapter (for some hardware sensors)"
+ depends on I2C && I2C_PROC
+ help
+ This provide support for accessing some hardware sensors chips over
+ the ISA bus rather than the I2C or SMBus. If you want to do this,
+ say yes here.
+
+ This can also be built as a module which can be inserted and removed
+ while the kernel is running. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ The module will be called i2c-isa.o.
+
+ You will also need the latest user-space utilties: you can find them
+ in the lm_sensors package, which you can download at
+ http://www.lm-sensors.nu
+
endmenu
diff -Nru linux-2.5.54-bk1/drivers/i2c/busses/Makefile linux-2.5.54/drivers/i2c/busses/Makefile
--- linux-2.5.54-bk1/drivers/i2c/busses/Makefile 2003-01-04 23:22:36.000000000 +0100
+++ linux-2.5.54/drivers/i2c/busses/Makefile 2003-01-04 15:38:19.000000000 +0100
@@ -4,3 +4,4 @@
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
+obj-$(CONFIG_I2C_ISA) += i2c-isa.o
diff -Nru linux-2.5.54-bk1/drivers/i2c/busses/i2c-isa.c linux-2.5.54/drivers/i2c/busses/i2c-isa.c
--- linux-2.5.54-bk1/drivers/i2c/busses/i2c-isa.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.5.54/drivers/i2c/busses/i2c-isa.c 2003-01-05 02:30:59.000000000 +0100
@@ -0,0 +1,108 @@
+/*
+ i2c-isa.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This implements an i2c algorithm/adapter for ISA bus. Not that this is
+ on first sight very useful; almost no functionality is preserved.
+ Except that it makes writing drivers for chips which can be on both
+ the SMBus and the ISA bus very much easier. See lm78.c for an example
+ of this. */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+
+#define DRV_NAME "i2c-isa"
+
+static u32 isa_func(struct i2c_adapter *adapter);
+
+static int isa_cleanup(void);
+
+/* This is the actual algorithm we define */
+static struct i2c_algorithm isa_algorithm = {
+ .name = "ISA bus algorithm",
+ .id = I2C_ALGO_ISA,
+ .smbus_xfer = NULL,
+ .functionality = &isa_func,
+};
+
+/* There can only be one... */
+static struct i2c_adapter isa_adapter = {
+ .owner = THIS_MODULE,
+ .name = "ISA main adapter",
+ .id = I2C_ALGO_ISA | I2C_HW_ISA,
+ .algo = &isa_algorithm,
+};
+
+/* Used in isa_init/cleanup */
+static int __initdata isa_initialized;
+
+/* We can't do a thing... */
+static u32 isa_func(struct i2c_adapter *adapter)
+{
+ return 0;
+}
+
+static int __init isa_init(void)
+{
+ int res;
+ if (isa_initialized) {
+ pr_debug(DRV_NAME
+ ": i2c-isa.o: Oops, isa_init called a second time!\n");
+ return -EBUSY;
+ }
+ isa_initialized = 0;
+ if ((res = i2c_add_adapter(&isa_adapter))) {
+ printk(KERN_ERR DRV_NAME
+ ": Adapter registration failed, module not inserted\n.");
+ isa_cleanup();
+ return res;
+ }
+ isa_initialized++;
+ printk("i2c-isa.o: ISA bus access for i2c modules initialized.\n");
+ return 0;
+}
+
+static void __exit isa_exit(void)
+{
+ isa_cleanup();
+}
+
+static int isa_cleanup(void)
+{
+ int res;
+ if (isa_initialized >= 1) {
+ if ((res = i2c_del_adapter(&isa_adapter))) {
+ printk
+ ("i2c-isa.o: Adapter deregistration failed, module not removed.\n");
+ return res;
+ } else
+ isa_initialized--;
+ }
+ return 0;
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("ISA bus access through i2c");
+MODULE_LICENSE("GPL");
+
+module_init(isa_init)
+module_exit(isa_exit)
diff -Nru linux-2.5.54-bk1/drivers/i2c/chips/Kconfig linux-2.5.54/drivers/i2c/chips/Kconfig
--- linux-2.5.54-bk1/drivers/i2c/chips/Kconfig 2003-01-04 23:22:36.000000000 +0100
+++ linux-2.5.54/drivers/i2c/chips/Kconfig 2003-01-04 15:56:02.000000000 +0100
@@ -37,4 +37,19 @@
in the lm_sensors package, which you can download at
http://www.lm-sensors.nu
+config SENSORS_W83781D
+ tristate " Winbond W83781D, W83782D, W83783S, W83627HF and Asus AS99127F"
+ depends on I2C && I2C_PROC && I2C_ISA
+ help
+ If you say yes here you get support for the Winbond W8378x series
+ of sensor chips: the W83781D, W83782D, W83783S, W83627HF and the
+ similar Asus AS99127F. This can also be built as a module
+ which can be inserted and removed while the kernel is running.
+
+ The module will be called w83781d.o.
+
+ You will also need the latest user-space utilties: you can find them
+ in the lm_sensors package, which you can download at
+ http://www.lm-sensors.nu
+
endmenu
diff -Nru linux-2.5.54-bk1/drivers/i2c/chips/Makefile linux-2.5.54/drivers/i2c/chips/Makefile
--- linux-2.5.54-bk1/drivers/i2c/chips/Makefile 2003-01-04 23:22:36.000000000 +0100
+++ linux-2.5.54/drivers/i2c/chips/Makefile 2003-01-04 15:55:42.000000000 +0100
@@ -4,3 +4,4 @@
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
+obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
diff -Nru linux-2.5.54-bk1/drivers/i2c/chips/w83781d.c linux-2.5.54/drivers/i2c/chips/w83781d.c
--- linux-2.5.54-bk1/drivers/i2c/chips/w83781d.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.5.54/drivers/i2c/chips/w83781d.c 2003-01-05 02:00:25.000000000 +0100
@@ -0,0 +1,2075 @@
+/*
+ w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ and Mark Studebaker <mdsxyz123@yahoo.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ Supports following chips:
+
+ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ as99127f 7 3 1? 3 0x30 0x12c3 yes no
+ asb100 "bach" (type_name = as99127f) 0x30 0x0694 yes no
+ w83781d 7 3 0 3 0x10 0x5ca3 yes yes
+ w83627hf 9 3 2 3 0x20 0x5ca3 yes yes(LPC)
+ w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
+ w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
+ w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
+
+*/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/ioport.h>
+#include <linux/sysctl.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/i2c-proc.h>
+#include <linux/init.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+/* Registers */
+#define W83781D_SYSCTL_IN0 1000 /* Volts * 100 */
+#define W83781D_SYSCTL_IN1 1001
+#define W83781D_SYSCTL_IN2 1002
+#define W83781D_SYSCTL_IN3 1003
+#define W83781D_SYSCTL_IN4 1004
+#define W83781D_SYSCTL_IN5 1005
+#define W83781D_SYSCTL_IN6 1006
+#define W83781D_SYSCTL_IN7 1007
+#define W83781D_SYSCTL_IN8 1008
+#define W83781D_SYSCTL_FAN1 1101 /* Rotations/min */
+#define W83781D_SYSCTL_FAN2 1102
+#define W83781D_SYSCTL_FAN3 1103
+#define W83781D_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
+#define W83781D_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
+#define W83781D_SYSCTL_TEMP3 1202 /* Degrees Celcius * 10 */
+#define W83781D_SYSCTL_VID 1300 /* Volts * 1000 */
+#define W83781D_SYSCTL_VRM 1301
+#define W83781D_SYSCTL_PWM1 1401
+#define W83781D_SYSCTL_PWM2 1402
+#define W83781D_SYSCTL_PWM3 1403
+#define W83781D_SYSCTL_PWM4 1404
+#define W83781D_SYSCTL_SENS1 1501 /* 1, 2, or Beta (3000-5000) */
+#define W83781D_SYSCTL_SENS2 1502
+#define W83781D_SYSCTL_SENS3 1503
+#define W83781D_SYSCTL_RT1 1601 /* 32-entry table */
+#define W83781D_SYSCTL_RT2 1602 /* 32-entry table */
+#define W83781D_SYSCTL_RT3 1603 /* 32-entry table */
+#define W83781D_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
+#define W83781D_SYSCTL_ALARMS 2001 /* bitvector */
+#define W83781D_SYSCTL_BEEP 2002 /* bitvector */
+
+#define W83781D_ALARM_IN0 0x0001
+#define W83781D_ALARM_IN1 0x0002
+#define W83781D_ALARM_IN2 0x0004
+#define W83781D_ALARM_IN3 0x0008
+#define W83781D_ALARM_IN4 0x0100
+#define W83781D_ALARM_IN5 0x0200
+#define W83781D_ALARM_IN6 0x0400
+#define W83782D_ALARM_IN7 0x10000
+#define W83782D_ALARM_IN8 0x20000
+#define W83781D_ALARM_FAN1 0x0040
+#define W83781D_ALARM_FAN2 0x0080
+#define W83781D_ALARM_FAN3 0x0800
+#define W83781D_ALARM_TEMP1 0x0010
+#define W83781D_ALARM_TEMP23 0x0020 /* 781D only */
+#define W83781D_ALARM_TEMP2 0x0020 /* 782D/783S */
+#define W83781D_ALARM_TEMP3 0x2000 /* 782D only */
+#define W83781D_ALARM_CHAS 0x1000
+
+/*
+ The part below contains common code for decoding VID pins.
+ This is included in various chip drivers in this directory.
+ As the user is unlikely to load more than one driver which
+ includes this code we don't worry about the wasted space.
+ Reference: VRM x.y DC-DC Converter Design Guidelines,
+ available at http://developer.intel.com
+*/
+
+/*
+ Legal val values 00 - 1F.
+ vrm is the Intel VRM document version.
+ Note: vrm version is scaled by 10 and the return value is scaled by 1000
+ to avoid floating point in the kernel.
+*/
+
+#define DEFAULT_VRM 82
+
+static int vid_from_reg(int val, int vrm);
+
+static int vid_from_reg(int val, int vrm)
+{
+ switch(vrm) {
+
+ case 91: /* VRM 9.1 */
+ case 90: /* VRM 9.0 */
+ return(val == 0x1f ? 0 :
+ 1850 - val * 25);
+
+ case 85: /* VRM 8.5 */
+ return((val & 0x10 ? 25 : 0) +
+ ((val & 0x0f) > 0x04 ? 2050 : 1250) -
+ ((val & 0x0f) * 50));
+
+ case 84: /* VRM 8.4 */
+ val &= 0x0f;
+ /* fall through */
+ default: /* VRM 8.2 */
+ return(val == 0x1f ? 0 :
+ val & 0x10 ? 5100 - (val) * 100 :
+ 2050 - (val) * 50);
+ }
+}
+
+
+/* RT Table support #defined so we can take it out if it gets bothersome */
+#define W83781D_RT 1
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { SENSORS_I2C_END };
+static unsigned short normal_i2c_range[] = { 0x20, 0x2f, SENSORS_I2C_END };
+static unsigned int normal_isa[] = { 0x0290, SENSORS_ISA_END };
+static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf);
+SENSORS_MODULE_PARM(force_subclients, "List of subclient addresses: " \
+ "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int init = 1;
+MODULE_PARM(init, "i");
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define W83781D_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET 5
+#define W83781D_DATA_REG_OFFSET 6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+ (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+ (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
+ (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
+#define W83781D_REG_FAN(nr) (0x27 + (nr))
+
+#define W83781D_REG_TEMP2 0x0150
+#define W83781D_REG_TEMP3 0x0250
+#define W83781D_REG_TEMP2_HYST 0x153
+#define W83781D_REG_TEMP3_HYST 0x253
+#define W83781D_REG_TEMP2_CONFIG 0x152
+#define W83781D_REG_TEMP3_CONFIG 0x252
+#define W83781D_REG_TEMP2_OVER 0x155
+#define W83781D_REG_TEMP3_OVER 0x255
+
+#define W83781D_REG_TEMP 0x27
+#define W83781D_REG_TEMP_OVER 0x39
+#define W83781D_REG_TEMP_HYST 0x3A
+#define W83781D_REG_BANK 0x4E
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x41
+#define W83781D_REG_ALARM2 0x42
+#define W83781D_REG_ALARM3 0x450 /* not on W83781D */
+
+#define W83781D_REG_IRQ 0x4C
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+/* 782D/783S only */
+#define W83781D_REG_VBAT 0x5D
+
+/* PWM 782D (1-4) and 783S (1-2) only */
+#define W83781D_REG_PWM1 0x5B /* 782d and 783s/627hf datasheets disagree */
+ /* on which is which; */
+#define W83781D_REG_PWM2 0x5A /* We follow the 782d convention here, */
+ /* However 782d is probably wrong. */
+#define W83781D_REG_PWM3 0x5E
+#define W83781D_REG_PWM4 0x5F
+#define W83781D_REG_PWMCLK12 0x5C
+#define W83781D_REG_PWMCLK34 0x45C
+static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
+ W83781D_REG_PWM3, W83781D_REG_PWM4
+};
+#define W83781D_REG_PWM(nr) (regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* The following are undocumented in the data sheets however we
+ received the information in an email from Winbond tech support */
+/* Sensor selection - not on 781d */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+#define W83781D_DEFAULT_BETA 3435
+
+/* RT Table registers */
+#define W83781D_REG_RT_IDX 0x50
+#define W83781D_REG_RT_VAL 0x51
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+ variants. Note that you should be a bit careful with which arguments
+ these macros are called: arguments may be evaluated more than once.
+ Fixing this is just not worth it. */
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
+#define IN_FROM_REG(val) (((val) * 16) / 10)
+
+extern inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+ 254);
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-5)/10):\
+ ((val)+5)/10),0,255))
+#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*10)
+
+#define TEMP_ADD_TO_REG(val) (SENSORS_LIMIT(((((val) + 2) / 5) << 7),\
+ 0,0xffff))
+#define TEMP_ADD_FROM_REG(val) (((val) >> 7) * 5)
+
+#define AS99127_TEMP_ADD_TO_REG(val) (SENSORS_LIMIT((((((val) + 2)*4)/10) \
+ << 7),0,0xffff))
+#define AS99127_TEMP_ADD_FROM_REG(val) ((((val) >> 7) * 10) / 4)
+
+#define ALARMS_FROM_REG(val) (val)
+#define PWM_FROM_REG(val) (val)
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+#define BEEPS_FROM_REG(val) (val)
+#define BEEPS_TO_REG(val) ((val) & 0xffffff)
+
+#define BEEP_ENABLE_TO_REG(val) ((val)?1:0)
+#define BEEP_ENABLE_FROM_REG(val) ((val)?1:0)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+extern inline u8 DIV_TO_REG(long val, enum chips type)
+{
+ int i;
+ val = SENSORS_LIMIT(val, 1,
+ ((type == w83781d || type == as99127f) ? 8 : 128)) >> 1;
+ for (i = 0; i < 6; i++) {
+ if (val == 0)
+ break;
+ val >>= 1;
+ }
+ return ((u8) i);
+}
+
+/* Initial limits */
+#define W83781D_INIT_IN_0 (vid==3500?280:vid/10)
+#define W83781D_INIT_IN_1 (vid==3500?280:vid/10)
+#define W83781D_INIT_IN_2 330
+#define W83781D_INIT_IN_3 (((500) * 100)/168)
+#define W83781D_INIT_IN_4 (((1200) * 10)/38)
+#define W83781D_INIT_IN_5 (((-1200) * -604)/2100)
+#define W83781D_INIT_IN_6 (((-500) * -604)/909)
+#define W83781D_INIT_IN_7 (((500) * 100)/168)
+#define W83781D_INIT_IN_8 300
+/* Initial limits for 782d/783s negative voltages */
+/* Note level shift. Change min/max below if you change these. */
+#define W83782D_INIT_IN_5 ((((-1200) + 1491) * 100)/514)
+#define W83782D_INIT_IN_6 ((( (-500) + 771) * 100)/314)
+
+#define W83781D_INIT_IN_PERCENTAGE 10
+
+#define W83781D_INIT_IN_MIN_0 \
+ (W83781D_INIT_IN_0 - W83781D_INIT_IN_0 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_0 \
+ (W83781D_INIT_IN_0 + W83781D_INIT_IN_0 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_1 \
+ (W83781D_INIT_IN_1 - W83781D_INIT_IN_1 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_1 \
+ (W83781D_INIT_IN_1 + W83781D_INIT_IN_1 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_2 \
+ (W83781D_INIT_IN_2 - W83781D_INIT_IN_2 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_2 \
+ (W83781D_INIT_IN_2 + W83781D_INIT_IN_2 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_3 \
+ (W83781D_INIT_IN_3 - W83781D_INIT_IN_3 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_3 \
+ (W83781D_INIT_IN_3 + W83781D_INIT_IN_3 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_4 \
+ (W83781D_INIT_IN_4 - W83781D_INIT_IN_4 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_4 \
+ (W83781D_INIT_IN_4 + W83781D_INIT_IN_4 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_5 \
+ (W83781D_INIT_IN_5 - W83781D_INIT_IN_5 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_5 \
+ (W83781D_INIT_IN_5 + W83781D_INIT_IN_5 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_6 \
+ (W83781D_INIT_IN_6 - W83781D_INIT_IN_6 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_6 \
+ (W83781D_INIT_IN_6 + W83781D_INIT_IN_6 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_7 \
+ (W83781D_INIT_IN_7 - W83781D_INIT_IN_7 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_7 \
+ (W83781D_INIT_IN_7 + W83781D_INIT_IN_7 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MIN_8 \
+ (W83781D_INIT_IN_8 - W83781D_INIT_IN_8 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+#define W83781D_INIT_IN_MAX_8 \
+ (W83781D_INIT_IN_8 + W83781D_INIT_IN_8 * W83781D_INIT_IN_PERCENTAGE \
+ / 100)
+/* Initial limits for 782d/783s negative voltages */
+/* These aren't direct multiples because of level shift */
+/* Beware going negative - check */
+#define W83782D_INIT_IN_MIN_5_TMP \
+ (((-1200 * (100 + W83781D_INIT_IN_PERCENTAGE)) + (1491 * 100))/514)
+#define W83782D_INIT_IN_MIN_5 \
+ ((W83782D_INIT_IN_MIN_5_TMP > 0) ? W83782D_INIT_IN_MIN_5_TMP : 0)
+#define W83782D_INIT_IN_MAX_5 \
+ (((-1200 * (100 - W83781D_INIT_IN_PERCENTAGE)) + (1491 * 100))/514)
+#define W83782D_INIT_IN_MIN_6_TMP \
+ ((( -500 * (100 + W83781D_INIT_IN_PERCENTAGE)) + (771 * 100))/314)
+#define W83782D_INIT_IN_MIN_6 \
+ ((W83782D_INIT_IN_MIN_6_TMP > 0) ? W83782D_INIT_IN_MIN_6_TMP : 0)
+#define W83782D_INIT_IN_MAX_6 \
+ ((( -500 * (100 - W83781D_INIT_IN_PERCENTAGE)) + (771 * 100))/314)
+
+#define W83781D_INIT_FAN_MIN_1 3000
+#define W83781D_INIT_FAN_MIN_2 3000
+#define W83781D_INIT_FAN_MIN_3 3000
+
+#define W83781D_INIT_TEMP_OVER 600
+#define W83781D_INIT_TEMP_HYST 1270 /* must be 127 for ALARM to work */
+#define W83781D_INIT_TEMP2_OVER 600
+#define W83781D_INIT_TEMP2_HYST 500
+#define W83781D_INIT_TEMP3_OVER 600
+#define W83781D_INIT_TEMP3_HYST 500
+
+/* There are some complications in a module like this. First off, W83781D chips
+ may be both present on the SMBus and the ISA bus, and we have to handle
+ those cases separately at some places. Second, there might be several
+ W83781D chips available (well, actually, that is probably never done; but
+ it is a clean illustration of how to handle a case like that). Finally,
+ a specific chip may be attached to *both* ISA and SMBus, and we would
+ not like to detect it double. Fortunately, in the case of the W83781D at
+ least, a register tells us what SMBus address we are on, so that helps
+ a bit - except if there could be more than one SMBus. Groan. No solution
+ for this yet. */
+
+/* This module may seem overly long and complicated. In fact, it is not so
+ bad. Quite a lot of bookkeeping is done. A real driver can often cut
+ some corners. */
+
+/* For each registered W83781D, we need to keep some data in memory. That
+ data is pointed to by w83781d_list[NR]->data. The structure itself is
+ dynamically allocated, at the same time when a new w83781d client is
+ allocated. */
+struct w83781d_data {
+ struct semaphore lock;
+ int sysctl_id;
+ enum chips type;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ struct i2c_client *lm75; /* for secondary I2C addresses */
+ /* pointer to array of 2 subclients */
+
+ u8 in[9]; /* Register value - 8 & 9 for 782D only */
+ u8 in_max[9]; /* Register value - 8 & 9 for 782D only */
+ u8 in_min[9]; /* Register value - 8 & 9 for 782D only */
+ u8 fan[3]; /* Register value */
+ u8 fan_min[3]; /* Register value */
+ u8 temp;
+ u8 temp_over; /* Register value */
+ u8 temp_hyst; /* Register value */
+ u16 temp_add[2]; /* Register value */
+ u16 temp_add_over[2]; /* Register value */
+ u16 temp_add_hyst[2]; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
+ u8 vid; /* Register encoding, combined */
+ u32 alarms; /* Register encoding, combined */
+ u32 beeps; /* Register encoding, combined */
+ u8 beep_enable; /* Boolean */
+ u8 pwm[4]; /* Register value */
+ u16 sens[3]; /* 782D/783S only.
+ 1 = pentium diode; 2 = 3904 diode;
+ 3000-5000 = thermistor beta.
+ Default = 3435.
+ Other Betas unimplemented */
+#ifdef W83781D_RT
+ u8 rt[3][32]; /* Register value */
+#endif
+ u8 vrm;
+};
+
+static int w83781d_attach_adapter(struct i2c_adapter *adapter);
+static int w83781d_detect(struct i2c_adapter *adapter, int address,
+ unsigned short flags, int kind);
+static int w83781d_detach_client(struct i2c_client *client);
+static int w83781d_command(struct i2c_client *client, unsigned int cmd,
+ void *arg);
+
+static int w83781d_read_value(struct i2c_client *client, u16 register);
+static int w83781d_write_value(struct i2c_client *client, u16 register,
+ u16 value);
+static void w83781d_update_client(struct i2c_client *client);
+static void w83781d_init_client(struct i2c_client *client);
+
+
+static void w83781d_in(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_fan(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_temp(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_temp_add(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_vid(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_vrm(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_alarms(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_beep(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_fan_div(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_pwm(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+static void w83781d_sens(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+#ifdef W83781D_RT
+static void w83781d_rt(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results);
+#endif
+static u16 swap_bytes(u16 val);
+
+static int w83781d_id = 0;
+
+static struct i2c_driver w83781d_driver = {
+ .name = "W83781D sensor driver",
+ .id = I2C_DRIVERID_W83781D,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = &w83781d_attach_adapter,
+ .detach_client = &w83781d_detach_client,
+ .command = &w83781d_command,
+};
+
+/* The /proc/sys entries */
+/* These files are created for each detected chip. This is just a template;
+ though at first sight, you might think we could use a statically
+ allocated list, we need some way to get back to the parent - which
+ is done through one of the 'extra' fields which are initialized
+ when a new copy is allocated. */
+
+/* just a guess - no datasheet */
+static ctl_table as99127f_dir_table_template[] = {
+ {W83781D_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp},
+ {W83781D_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vid},
+ {W83781D_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vrm},
+ {W83781D_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan_div},
+ {W83781D_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_alarms},
+ {W83781D_SYSCTL_BEEP, "beep", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_beep},
+ {W83781D_SYSCTL_PWM1, "pwm1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM2, "pwm2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {0}
+};
+
+static ctl_table w83781d_dir_table_template[] = {
+ {W83781D_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp},
+ {W83781D_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vid},
+ {W83781D_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vrm},
+ {W83781D_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan_div},
+ {W83781D_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_alarms},
+ {W83781D_SYSCTL_BEEP, "beep", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_beep},
+#ifdef W83781D_RT
+ {W83781D_SYSCTL_RT1, "rt1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_rt},
+ {W83781D_SYSCTL_RT2, "rt2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_rt},
+ {W83781D_SYSCTL_RT3, "rt3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_rt},
+#endif
+ {0}
+};
+
+/* without pwm3-4 */
+static ctl_table w83782d_isa_dir_table_template[] = {
+ {W83781D_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN7, "in7", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN8, "in8", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp},
+ {W83781D_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vid},
+ {W83781D_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vrm},
+ {W83781D_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan_div},
+ {W83781D_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_alarms},
+ {W83781D_SYSCTL_BEEP, "beep", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_beep},
+ {W83781D_SYSCTL_PWM1, "pwm1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM2, "pwm2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_SENS1, "sensor1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {W83781D_SYSCTL_SENS2, "sensor2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {W83781D_SYSCTL_SENS3, "sensor3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {0}
+};
+
+/* with pwm3-4 */
+static ctl_table w83782d_i2c_dir_table_template[] = {
+ {W83781D_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN7, "in7", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN8, "in8", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp},
+ {W83781D_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vid},
+ {W83781D_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vrm},
+ {W83781D_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan_div},
+ {W83781D_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_alarms},
+ {W83781D_SYSCTL_BEEP, "beep", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_beep},
+ {W83781D_SYSCTL_PWM1, "pwm1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM2, "pwm2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM3, "pwm3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM4, "pwm4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_SENS1, "sensor1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {W83781D_SYSCTL_SENS2, "sensor2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {W83781D_SYSCTL_SENS3, "sensor3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {0}
+};
+
+static ctl_table w83783s_dir_table_template[] = {
+ {W83781D_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ /* no in1 to maintain compatibility with 781d and 782d. */
+ {W83781D_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN3, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp},
+ {W83781D_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_VID, "vid", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vid},
+ {W83781D_SYSCTL_VRM, "vrm", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_vrm},
+ {W83781D_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan_div},
+ {W83781D_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_alarms},
+ {W83781D_SYSCTL_BEEP, "beep", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_beep},
+ {W83781D_SYSCTL_PWM1, "pwm1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM2, "pwm2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_SENS1, "sensor1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {W83781D_SYSCTL_SENS2, "sensor2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {0}
+};
+
+/* similar to w83782d but no fan3, no vid */
+static ctl_table w83697hf_dir_table_template[] = {
+ {W83781D_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ /* no in1 to maintain compatibility with 781d and 782d. */
+ {W83781D_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN5, "in5", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN6, "in6", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN7, "in7", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_IN8, "in8", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_in},
+ {W83781D_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan},
+ {W83781D_SYSCTL_TEMP1, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp},
+ {W83781D_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_temp_add},
+ {W83781D_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_fan_div},
+ {W83781D_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_alarms},
+ {W83781D_SYSCTL_BEEP, "beep", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_beep},
+ {W83781D_SYSCTL_PWM1, "pwm1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_PWM2, "pwm2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_pwm},
+ {W83781D_SYSCTL_SENS1, "sensor1", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {W83781D_SYSCTL_SENS2, "sensor2", NULL, 0, 0644, NULL, &i2c_proc_real,
+ &i2c_sysctl_real, NULL, &w83781d_sens},
+ {0}
+};
+
+
+/* This function is called when:
+ * w83781d_driver is inserted (when this module is loaded), for each
+ available adapter
+ * when a new adapter is inserted (and w83781d_driver is still present) */
+int w83781d_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_detect(adapter, &addr_data, w83781d_detect);
+}
+
+int w83781d_detect(struct i2c_adapter *adapter, int address,
+ unsigned short flags, int kind)
+{
+ int i, val1 = 0, val2, id;
+ struct i2c_client *new_client;
+ struct w83781d_data *data;
+ int err = 0;
+ const char *type_name = "";
+ const char *client_name = "";
+ int is_isa = i2c_is_isa_adapter(adapter);
+ enum vendor { winbond, asus } vendid;
+
+ if (!is_isa
+ && !i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) goto
+ ERROR0;
+
+ if (is_isa) {
+ if (!request_region(address, W83781D_EXTENT, "w83781d"))
+ goto ERROR0;
+ release_region(address, W83781D_EXTENT);
+ }
+
+ /* Probe whether there is anything available on this address. Already
+ done for SMBus clients */
+ if (kind < 0) {
+ if (is_isa) {
+
+#define REALLY_SLOW_IO
+ /* We need the timeouts for at least some LM78-like chips. But only
+ if we read 'undefined' registers. */
+ i = inb_p(address + 1);
+ if (inb_p(address + 2) != i)
+ goto ERROR0;
+ if (inb_p(address + 3) != i)
+ goto ERROR0;
+ if (inb_p(address + 7) != i)
+ goto ERROR0;
+#undef REALLY_SLOW_IO
+
+ /* Let's just hope nothing breaks here */
+ i = inb_p(address + 5) & 0x7f;
+ outb_p(~i & 0x7f, address + 5);
+ if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
+ outb_p(i, address + 5);
+ return 0;
+ }
+ }
+ }
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access w83781d_{read,write}_value. */
+
+ if (!(new_client = kmalloc(sizeof(struct i2c_client) +
+ sizeof(struct w83781d_data),
+ GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto ERROR0;
+ }
+
+ data = (struct w83781d_data *) (new_client + 1);
+ new_client->addr = address;
+ init_MUTEX(&data->lock);
+ new_client->data = data;
+ new_client->adapter = adapter;
+ new_client->driver = &w83781d_driver;
+ new_client->flags = 0;
+
+ /* Now, we do the remaining detection. */
+
+ /* The w8378?d may be stuck in some other bank than bank 0. This may
+ make reading other information impossible. Specify a force=... or
+ force_*=... parameter, and the Winbond will be reset to the right
+ bank. */
+ if (kind < 0) {
+ if (w83781d_read_value(new_client, W83781D_REG_CONFIG) &
+ 0x80) goto ERROR1;
+ val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
+ val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+ /* Check for Winbond or Asus ID if in bank 0 */
+ if ((!(val1 & 0x07)) &&
+ (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3)
+ && (val2 != 0x94))
+ || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)
+ && (val2 != 0x06)))) goto ERROR1;
+ /* If Winbond SMBus, check address at 0x48. Asus doesn't support */
+ if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
+ ((val1 & 0x80) && (val2 == 0x5c)))) {
+ if (w83781d_read_value
+ (new_client, W83781D_REG_I2C_ADDR) != address)
+ goto ERROR1;
+ }
+ }
+
+ /* We have either had a force parameter, or we have already detected the
+ Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ w83781d_write_value(new_client, W83781D_REG_BANK,
+ (w83781d_read_value(new_client,
+ W83781D_REG_BANK) & 0x78) |
+ 0x80);
+
+ /* Determine the chip type. */
+ if (kind <= 0) {
+ /* get vendor ID */
+ val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+ if (val2 == 0x5c)
+ vendid = winbond;
+ else if ((val2 == 0x12) || (val2 == 0x06))
+ vendid = asus;
+ else
+ goto ERROR1;
+ /* mask off lower bit, not reliable */
+ val1 =
+ w83781d_read_value(new_client,
+ W83781D_REG_WCHIPID) & 0xfe;
+ if (val1 == 0x10 && vendid == winbond)
+ kind = w83781d;
+ else if (val1 == 0x30 && vendid == winbond)
+ kind = w83782d;
+ else if (val1 == 0x40 && vendid == winbond && !is_isa)
+ kind = w83783s;
+ else if (val1 == 0x20 && vendid == winbond)
+ kind = w83627hf;
+ else if (val1 == 0x30 && vendid == asus && !is_isa)
+ kind = as99127f;
+ else if (val1 == 0x60 && vendid == winbond && is_isa)
+ kind = w83697hf;
+ else {
+ if (kind == 0)
+ printk
+ (KERN_WARNING "w83781d.o: Ignoring 'force' parameter for unknown chip at"
+ "adapter %d, address 0x%02x\n",
+ i2c_adapter_id(adapter), address);
+ goto ERROR1;
+ }
+ }
+
+ if (kind == w83781d) {
+ type_name = "w83781d";
+ client_name = "W83781D chip";
+ } else if (kind == w83782d) {
+ type_name = "w83782d";
+ client_name = "W83782D chip";
+ } else if (kind == w83783s) {
+ type_name = "w83783s";
+ client_name = "W83783S chip";
+ } else if (kind == w83627hf) {
+ type_name = "w83627hf";
+ client_name = "W83627HF chip";
+ } else if (kind == as99127f) {
+ type_name = "as99127f";
+ client_name = "AS99127F chip";
+ } else if (kind == w83697hf) {
+ type_name = "w83697hf";
+ client_name = "W83697HF chip";
+ } else {
+ pr_debug(KERN_ERR "w83781d.o: Internal error: unknown kind (%d)?!?",
+ kind);
+ goto ERROR1;
+ }
+
+ /* Reserve the ISA region */
+ if (is_isa)
+ request_region(address, W83781D_EXTENT, type_name);
+
+ /* Fill in the remaining client fields and put it into the global list */
+ strcpy(new_client->name, client_name);
+ data->type = kind;
+
+ new_client->id = w83781d_id++;
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto ERROR3;
+
+ /* attach secondary i2c lm75-like clients */
+ if (!is_isa) {
+ if (!(data->lm75 = kmalloc(2 * sizeof(struct i2c_client),
+ GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto ERROR4;
+ }
+ id = i2c_adapter_id(adapter);
+ if(force_subclients[0] == id && force_subclients[1] == address) {
+ for(i = 2; i <= 3; i++) {
+ if(force_subclients[i] < 0x48 ||
+ force_subclients[i] > 0x4f) {
+ printk(KERN_ERR "w83781d.o: Invalid subclient address %d; must be 0x48-0x4f\n",
+ force_subclients[i]);
+ goto ERROR5;
+ }
+ }
+ w83781d_write_value(new_client,
+ W83781D_REG_I2C_SUBADDR,
+ (force_subclients[2] & 0x07) |
+ ((force_subclients[3] & 0x07) <<4));
+ data->lm75[0].addr = force_subclients[2];
+ } else {
+ val1 = w83781d_read_value(new_client,
+ W83781D_REG_I2C_SUBADDR);
+ data->lm75[0].addr = 0x48 + (val1 & 0x07);
+ }
+ if (kind != w83783s) {
+ if(force_subclients[0] == id &&
+ force_subclients[1] == address) {
+ data->lm75[1].addr = force_subclients[3];
+ } else {
+ data->lm75[1].addr = 0x48 + ((val1 >> 4) & 0x07);
+ }
+ if(data->lm75[0].addr == data->lm75[1].addr) {
+ printk(KERN_ERR "w83781d.o: Duplicate addresses 0x%x for subclients.\n",
+ data->lm75[0].addr);
+ goto ERROR5;
+ }
+ }
+ if (kind == w83781d)
+ client_name = "W83781D subclient";
+ else if (kind == w83782d)
+ client_name = "W83782D subclient";
+ else if (kind == w83783s)
+ client_name = "W83783S subclient";
+ else if (kind == w83627hf)
+ client_name = "W83627HF subclient";
+ else if (kind == as99127f)
+ client_name = "AS99127F subclient";
+
+ for (i = 0; i <= 1; i++) {
+ data->lm75[i].data = NULL; /* store all data in w83781d */
+ data->lm75[i].adapter = adapter;
+ data->lm75[i].driver = &w83781d_driver;
+ data->lm75[i].flags = 0;
+ strcpy(data->lm75[i].name, client_name);
+ data->lm75[i].id = w83781d_id++;
+ if ((err = i2c_attach_client(&(data->lm75[i])))) {
+ printk(KERN_ERR "w83781d.o: Subclient %d registration at address 0x%x failed.\n",
+ i, data->lm75[i].addr);
+ if (i == 1)
+ goto ERROR6;
+ goto ERROR5;
+ }
+ if (kind == w83783s)
+ break;
+ }
+ } else {
+ data->lm75 = NULL;
+ }
+
+ /* Register a new directory entry with module sensors */
+ if ((i = i2c_register_entry(new_client,
+ type_name,
+ (kind == as99127f) ?
+ as99127f_dir_table_template :
+ (kind == w83781d) ?
+ w83781d_dir_table_template :
+ (kind == w83783s) ?
+ w83783s_dir_table_template :
+ (kind == w83697hf) ?
+ w83697hf_dir_table_template :
+ (is_isa || kind == w83627hf) ?
+ w83782d_isa_dir_table_template :
+ w83782d_i2c_dir_table_template,
+ THIS_MODULE)) < 0) {
+ err = i;
+ goto ERROR7;
+ }
+ data->sysctl_id = i;
+
+ /* Initialize the chip */
+ w83781d_init_client(new_client);
+ return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+ very code-efficient in this case. */
+
+ ERROR7:
+ if (!is_isa)
+ i2c_detach_client(&
+ (((struct
+ w83781d_data *) (new_client->data))->
+ lm75[1]));
+ ERROR6:
+ if (!is_isa)
+ i2c_detach_client(&
+ (((struct
+ w83781d_data *) (new_client->data))->
+ lm75[0]));
+ ERROR5:
+ if (!is_isa)
+ kfree(((struct w83781d_data *) (new_client->data))->lm75);
+ ERROR4:
+ i2c_detach_client(new_client);
+ ERROR3:
+ if (is_isa)
+ release_region(address, W83781D_EXTENT);
+ ERROR1:
+ kfree(new_client);
+ ERROR0:
+ return err;
+}
+
+int w83781d_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ i2c_deregister_entry(((struct w83781d_data *) (client->data))->
+ sysctl_id);
+
+ if ((err = i2c_detach_client(client))) {
+ printk
+ (KERN_ERR "w83781d.o: Client deregistration failed, client not detached.\n");
+ return err;
+ }
+
+ if(i2c_is_isa_client(client)) {
+ release_region(client->addr, W83781D_EXTENT);
+ } else {
+ i2c_detach_client(&
+ (((struct
+ w83781d_data *) (client->data))->
+ lm75[0]));
+ if((((struct w83781d_data *) (client->data))->type) != w83783s)
+ i2c_detach_client(&
+ (((struct
+ w83781d_data *) (client->data))->
+ lm75[1]));
+ kfree(((struct w83781d_data *) (client->data))->lm75);
+ }
+ kfree(client);
+
+ return 0;
+}
+
+/* No commands defined yet */
+int w83781d_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ return 0;
+}
+
+
+u16 swap_bytes(u16 val)
+{
+ return (val >> 8) | (val << 8);
+}
+
+/* The SMBus locks itself, usually, but nothing may access the Winbond between
+ bank switches. ISA access must always be locked explicitly!
+ We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+ would slow down the W83781D access and should not be necessary.
+ There are some ugly typecasts here, but the good news is - they should
+ nowhere else be necessary! */
+int w83781d_read_value(struct i2c_client *client, u16 reg)
+{
+ int res, word_sized, bank;
+ struct i2c_client *cl;
+
+ down(&(((struct w83781d_data *) (client->data))->lock));
+ if (i2c_is_isa_client(client)) {
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x50)
+ || ((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+ res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ res =
+ (res << 8) + inb_p(client->addr +
+ W83781D_DATA_REG_OFFSET);
+ }
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ } else {
+ bank = (reg >> 8) & 0x0f;
+ if (bank > 2)
+ /* switch banks */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ bank);
+ if (bank == 0 || bank > 2) {
+ res = i2c_smbus_read_byte_data(client, reg & 0xff);
+ } else {
+ /* switch to subclient */
+ cl =
+ &(((struct w83781d_data *) (client->data))->
+ lm75[bank - 1]);
+ /* convert from ISA to LM75 I2C addresses */
+ switch (reg & 0xff) {
+ case 0x50: /* TEMP */
+ res =
+ swap_bytes(i2c_smbus_read_word_data
+ (cl, 0));
+ break;
+ case 0x52: /* CONFIG */
+ res = i2c_smbus_read_byte_data(cl, 1);
+ break;
+ case 0x53: /* HYST */
+ res =
+ swap_bytes(i2c_smbus_read_word_data
+ (cl, 2));
+ break;
+ case 0x55: /* OVER */
+ default:
+ res =
+ swap_bytes(i2c_smbus_read_word_data
+ (cl, 3));
+ break;
+ }
+ }
+ if (bank > 2)
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ 0);
+ }
+ up(&(((struct w83781d_data *) (client->data))->lock));
+ return res;
+}
+
+int w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+ int word_sized, bank;
+ struct i2c_client *cl;
+
+ down(&(((struct w83781d_data *) (client->data))->lock));
+ if (i2c_is_isa_client(client)) {
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ } else {
+ bank = (reg >> 8) & 0x0f;
+ if (bank > 2)
+ /* switch banks */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ bank);
+ if (bank == 0 || bank > 2) {
+ i2c_smbus_write_byte_data(client, reg & 0xff,
+ value & 0xff);
+ } else {
+ /* switch to subclient */
+ cl = &(((struct w83781d_data *) (client->data))->
+ lm75[bank - 1]);
+ /* convert from ISA to LM75 I2C addresses */
+ switch (reg & 0xff) {
+ case 0x52: /* CONFIG */
+ i2c_smbus_write_byte_data(cl, 1,
+ value & 0xff);
+ break;
+ case 0x53: /* HYST */
+ i2c_smbus_write_word_data(cl, 2,
+ swap_bytes(value));
+ break;
+ case 0x55: /* OVER */
+ i2c_smbus_write_word_data(cl, 3,
+ swap_bytes(value));
+ break;
+ }
+ }
+ if (bank > 2)
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ 0);
+ }
+ up(&(((struct w83781d_data *) (client->data))->lock));
+ return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+void w83781d_init_client(struct i2c_client *client)
+{
+ struct w83781d_data *data = client->data;
+ int vid = 0, i;
+ int type = data->type;
+ u8 tmp;
+
+ if(init && type != as99127f) { /* this resets registers we don't have
+ documentation for on the as99127f */
+ /* save this register */
+ i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+ /* Reset all except Watchdog values and last conversion values
+ This sets fan-divs to 2, among others */
+ w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
+ /* Restore the register and disable power-on abnormal beep.
+ This saves FAN 1/2/3 input/output values set by BIOS. */
+ w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+ /* Disable master beep-enable (reset turns it on).
+ Individual beeps should be reset to off but for some reason
+ disabling this bit helps some people not get beeped */
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+ }
+
+ if (type != w83697hf) {
+ vid = w83781d_read_value(client, W83781D_REG_VID_FANDIV) & 0x0f;
+ vid |=
+ (w83781d_read_value(client, W83781D_REG_CHIPID) & 0x01) << 4;
+ data->vrm = DEFAULT_VRM;
+ vid = vid_from_reg(vid, data->vrm);
+ }
+
+ if ((type != w83781d) && (type != as99127f)) {
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+ for (i = 1; i <= 3; i++) {
+ if (!(tmp & BIT_SCFG1[i - 1])) {
+ data->sens[i - 1] = W83781D_DEFAULT_BETA;
+ } else {
+ if (w83781d_read_value
+ (client,
+ W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+ data->sens[i - 1] = 1;
+ else
+ data->sens[i - 1] = 2;
+ }
+ if ((type == w83783s || type == w83697hf) && (i == 2))
+ break;
+ }
+ }
+#ifdef W83781D_RT
+/*
+ Fill up the RT Tables.
+ We assume that they are 32 bytes long, in order for temp 1-3.
+ Data sheet documentation is sparse.
+ We also assume that it is only for the 781D although I suspect
+ that the others support it as well....
+*/
+
+ if (init && type == w83781d) {
+ u16 k = 0;
+/*
+ Auto-indexing doesn't seem to work...
+ w83781d_write_value(client,W83781D_REG_RT_IDX,0);
+*/
+ for (i = 0; i < 3; i++) {
+ int j;
+ for (j = 0; j < 32; j++) {
+ w83781d_write_value(client,
+ W83781D_REG_RT_IDX,
+ k++);
+ data->rt[i][j] =
+ w83781d_read_value(client,
+ W83781D_REG_RT_VAL);
+ }
+ }
+ }
+#endif /* W83781D_RT */
+
+ if(init) {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(0),
+ IN_TO_REG(W83781D_INIT_IN_MIN_0));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(0),
+ IN_TO_REG(W83781D_INIT_IN_MAX_0));
+ if (type != w83783s && type != w83697hf) {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(1),
+ IN_TO_REG(W83781D_INIT_IN_MIN_1));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(1),
+ IN_TO_REG(W83781D_INIT_IN_MAX_1));
+ }
+
+ w83781d_write_value(client, W83781D_REG_IN_MIN(2),
+ IN_TO_REG(W83781D_INIT_IN_MIN_2));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(2),
+ IN_TO_REG(W83781D_INIT_IN_MAX_2));
+ w83781d_write_value(client, W83781D_REG_IN_MIN(3),
+ IN_TO_REG(W83781D_INIT_IN_MIN_3));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(3),
+ IN_TO_REG(W83781D_INIT_IN_MAX_3));
+ w83781d_write_value(client, W83781D_REG_IN_MIN(4),
+ IN_TO_REG(W83781D_INIT_IN_MIN_4));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(4),
+ IN_TO_REG(W83781D_INIT_IN_MAX_4));
+ if (type == w83781d || type == as99127f) {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(5),
+ IN_TO_REG(W83781D_INIT_IN_MIN_5));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(5),
+ IN_TO_REG(W83781D_INIT_IN_MAX_5));
+ } else {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(5),
+ IN_TO_REG(W83782D_INIT_IN_MIN_5));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(5),
+ IN_TO_REG(W83782D_INIT_IN_MAX_5));
+ }
+ if (type == w83781d || type == as99127f) {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(6),
+ IN_TO_REG(W83781D_INIT_IN_MIN_6));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(6),
+ IN_TO_REG(W83781D_INIT_IN_MAX_6));
+ } else {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(6),
+ IN_TO_REG(W83782D_INIT_IN_MIN_6));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(6),
+ IN_TO_REG(W83782D_INIT_IN_MAX_6));
+ }
+ if ((type == w83782d) || (type == w83627hf) ||
+ (type == w83697hf)) {
+ w83781d_write_value(client, W83781D_REG_IN_MIN(7),
+ IN_TO_REG(W83781D_INIT_IN_MIN_7));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(7),
+ IN_TO_REG(W83781D_INIT_IN_MAX_7));
+ w83781d_write_value(client, W83781D_REG_IN_MIN(8),
+ IN_TO_REG(W83781D_INIT_IN_MIN_8));
+ w83781d_write_value(client, W83781D_REG_IN_MAX(8),
+ IN_TO_REG(W83781D_INIT_IN_MAX_8));
+ w83781d_write_value(client, W83781D_REG_VBAT,
+ (w83781d_read_value(client, W83781D_REG_VBAT) | 0x01));
+ }
+ w83781d_write_value(client, W83781D_REG_FAN_MIN(1),
+ FAN_TO_REG(W83781D_INIT_FAN_MIN_1, 2));
+ w83781d_write_value(client, W83781D_REG_FAN_MIN(2),
+ FAN_TO_REG(W83781D_INIT_FAN_MIN_2, 2));
+ if (type != w83697hf) {
+ w83781d_write_value(client, W83781D_REG_FAN_MIN(3),
+ FAN_TO_REG(W83781D_INIT_FAN_MIN_3, 2));
+ }
+
+ w83781d_write_value(client, W83781D_REG_TEMP_OVER,
+ TEMP_TO_REG(W83781D_INIT_TEMP_OVER));
+ w83781d_write_value(client, W83781D_REG_TEMP_HYST,
+ TEMP_TO_REG(W83781D_INIT_TEMP_HYST));
+
+ if (type == as99127f) {
+ w83781d_write_value(client, W83781D_REG_TEMP2_OVER,
+ AS99127_TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP2_OVER));
+ w83781d_write_value(client, W83781D_REG_TEMP2_HYST,
+ AS99127_TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP2_HYST));
+ } else {
+ w83781d_write_value(client, W83781D_REG_TEMP2_OVER,
+ TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP2_OVER));
+ w83781d_write_value(client, W83781D_REG_TEMP2_HYST,
+ TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP2_HYST));
+ }
+ w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG, 0x00);
+
+ if (type == as99127f) {
+ w83781d_write_value(client, W83781D_REG_TEMP3_OVER,
+ AS99127_TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP3_OVER));
+ w83781d_write_value(client, W83781D_REG_TEMP3_HYST,
+ AS99127_TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP3_HYST));
+ } else if (type != w83783s && type != w83697hf) {
+ w83781d_write_value(client, W83781D_REG_TEMP3_OVER,
+ TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP3_OVER));
+ w83781d_write_value(client, W83781D_REG_TEMP3_HYST,
+ TEMP_ADD_TO_REG
+ (W83781D_INIT_TEMP3_HYST));
+ }
+ if (type != w83783s && type != w83697hf) {
+ w83781d_write_value(client, W83781D_REG_TEMP3_CONFIG,
+ 0x00);
+ }
+ if (type != w83781d) {
+ /* enable PWM2 control (can't hurt since PWM reg
+ should have been reset to 0xff) */
+ w83781d_write_value(client, W83781D_REG_PWMCLK12, 0x19);
+ /* enable comparator mode for temp2 and temp3 so
+ alarm indication will work correctly */
+ w83781d_write_value(client, W83781D_REG_IRQ, 0x41);
+ }
+ }
+
+ /* Start monitoring */
+ w83781d_write_value(client, W83781D_REG_CONFIG,
+ (w83781d_read_value(client,
+ W83781D_REG_CONFIG) & 0xf7)
+ | 0x01);
+}
+
+void w83781d_update_client(struct i2c_client *client)
+{
+ struct w83781d_data *data = client->data;
+ int i;
+
+ down(&data->update_lock);
+
+ if ((jiffies - data->last_updated > HZ + HZ / 2) ||
+ (jiffies < data->last_updated) || !data->valid) {
+ pr_debug(KERN_DEBUG "Starting device update\n");
+
+ for (i = 0; i <= 8; i++) {
+ if ((data->type == w83783s || data->type == w83697hf)
+ && (i == 1))
+ continue; /* 783S has no in1 */
+ data->in[i] =
+ w83781d_read_value(client, W83781D_REG_IN(i));
+ data->in_min[i] =
+ w83781d_read_value(client,
+ W83781D_REG_IN_MIN(i));
+ data->in_max[i] =
+ w83781d_read_value(client,
+ W83781D_REG_IN_MAX(i));
+ if ((data->type != w83782d) && (data->type != w83697hf)
+ && (data->type != w83627hf) && (i == 6))
+ break;
+ }
+ for (i = 1; i <= 3; i++) {
+ data->fan[i - 1] =
+ w83781d_read_value(client, W83781D_REG_FAN(i));
+ data->fan_min[i - 1] =
+ w83781d_read_value(client,
+ W83781D_REG_FAN_MIN(i));
+ }
+ if (data->type != w83781d) {
+ for (i = 1; i <= 4; i++) {
+ data->pwm[i - 1] =
+ w83781d_read_value(client,
+ W83781D_REG_PWM(i));
+ if (((data->type == w83783s)
+ || (data->type == w83627hf)
+ || (data->type == as99127f)
+ || (data->type == w83697hf)
+ || ((data->type == w83782d)
+ && i2c_is_isa_client(client)))
+ && i == 2)
+ break;
+ }
+ }
+
+ data->temp = w83781d_read_value(client, W83781D_REG_TEMP);
+ data->temp_over =
+ w83781d_read_value(client, W83781D_REG_TEMP_OVER);
+ data->temp_hyst =
+ w83781d_read_value(client, W83781D_REG_TEMP_HYST);
+ data->temp_add[0] =
+ w83781d_read_value(client, W83781D_REG_TEMP2);
+ data->temp_add_over[0] =
+ w83781d_read_value(client, W83781D_REG_TEMP2_OVER);
+ data->temp_add_hyst[0] =
+ w83781d_read_value(client, W83781D_REG_TEMP2_HYST);
+ if (data->type != w83783s && data->type != w83697hf) {
+ data->temp_add[1] =
+ w83781d_read_value(client, W83781D_REG_TEMP3);
+ data->temp_add_over[1] =
+ w83781d_read_value(client, W83781D_REG_TEMP3_OVER);
+ data->temp_add_hyst[1] =
+ w83781d_read_value(client, W83781D_REG_TEMP3_HYST);
+ }
+ i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
+ if (data->type != w83697hf) {
+ data->vid = i & 0x0f;
+ data->vid |=
+ (w83781d_read_value(client, W83781D_REG_CHIPID) & 0x01)
+ << 4;
+ }
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = (i >> 6) & 0x03;
+ if (data->type != w83697hf) {
+ data->fan_div[2] = (w83781d_read_value(client,
+ W83781D_REG_PIN) >> 6) & 0x03;
+ }
+ if ((data->type != w83781d) && (data->type != as99127f)) {
+ i = w83781d_read_value(client, W83781D_REG_VBAT);
+ data->fan_div[0] |= (i >> 3) & 0x04;
+ data->fan_div[1] |= (i >> 4) & 0x04;
+ if (data->type != w83697hf)
+ data->fan_div[2] |= (i >> 5) & 0x04;
+ }
+ data->alarms =
+ w83781d_read_value(client,
+ W83781D_REG_ALARM1) +
+ (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
+ if ((data->type == w83782d) || (data->type == w83627hf)) {
+ data->alarms |=
+ w83781d_read_value(client,
+ W83781D_REG_ALARM3) << 16;
+ }
+ i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
+ data->beep_enable = i >> 7;
+ data->beeps = ((i & 0x7f) << 8) +
+ w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
+ if ((data->type != w83781d) && (data->type != as99127f)) {
+ data->beeps |=
+ w83781d_read_value(client,
+ W83781D_REG_BEEP_INTS3) << 16;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+}
+
+
+/* The next few functions are the call-back functions of the /proc/sys and
+ sysctl files. Which function is used is defined in the ctl_table in
+ the extra1 field.
+ Each function must return the magnitude (power of 10 to divide the date
+ with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
+ put a maximum of *nrels elements in results reflecting the data of this
+ file, and set *nrels to the number it actually put in it, if operation==
+ SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
+ results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
+ Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
+ large enough (by checking the incoming value of *nrels). This is not very
+ good practice, but as long as you put less than about 5 values in results,
+ you can assume it is large enough. */
+void w83781d_in(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int nr = ctl_name - W83781D_SYSCTL_IN0;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 2;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = IN_FROM_REG(data->in_min[nr]);
+ results[1] = IN_FROM_REG(data->in_max[nr]);
+ results[2] = IN_FROM_REG(data->in[nr]);
+ *nrels_mag = 3;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1) {
+ data->in_min[nr] = IN_TO_REG(results[0]);
+ w83781d_write_value(client, W83781D_REG_IN_MIN(nr),
+ data->in_min[nr]);
+ }
+ if (*nrels_mag >= 2) {
+ data->in_max[nr] = IN_TO_REG(results[1]);
+ w83781d_write_value(client, W83781D_REG_IN_MAX(nr),
+ data->in_max[nr]);
+ }
+ }
+}
+
+void w83781d_fan(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int nr = ctl_name - W83781D_SYSCTL_FAN1 + 1;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = FAN_FROM_REG(data->fan_min[nr - 1],
+ DIV_FROM_REG(data->fan_div[nr - 1]));
+ results[1] = FAN_FROM_REG(data->fan[nr - 1],
+ DIV_FROM_REG(data->fan_div[nr - 1]));
+ *nrels_mag = 2;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1) {
+ data->fan_min[nr - 1] =
+ FAN_TO_REG(results[0],
+ DIV_FROM_REG(data->fan_div[nr-1]));
+ w83781d_write_value(client,
+ W83781D_REG_FAN_MIN(nr),
+ data->fan_min[nr - 1]);
+ }
+ }
+}
+
+void w83781d_temp(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 1;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = TEMP_FROM_REG(data->temp_over);
+ results[1] = TEMP_FROM_REG(data->temp_hyst);
+ results[2] = TEMP_FROM_REG(data->temp);
+ *nrels_mag = 3;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1) {
+ data->temp_over = TEMP_TO_REG(results[0]);
+ w83781d_write_value(client, W83781D_REG_TEMP_OVER,
+ data->temp_over);
+ }
+ if (*nrels_mag >= 2) {
+ data->temp_hyst = TEMP_TO_REG(results[1]);
+ w83781d_write_value(client, W83781D_REG_TEMP_HYST,
+ data->temp_hyst);
+ }
+ }
+}
+
+void w83781d_temp_add(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int nr = ctl_name - W83781D_SYSCTL_TEMP2;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 1;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ if (data->type == as99127f) {
+ results[0] =
+ AS99127_TEMP_ADD_FROM_REG(data->
+ temp_add_over[nr]);
+ results[1] =
+ AS99127_TEMP_ADD_FROM_REG(data->
+ temp_add_hyst[nr]);
+ results[2] =
+ AS99127_TEMP_ADD_FROM_REG(data->temp_add[nr]);
+ } else {
+ results[0] =
+ TEMP_ADD_FROM_REG(data->temp_add_over[nr]);
+ results[1] =
+ TEMP_ADD_FROM_REG(data->temp_add_hyst[nr]);
+ results[2] = TEMP_ADD_FROM_REG(data->temp_add[nr]);
+ }
+ *nrels_mag = 3;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1) {
+ if (data->type == as99127f)
+ data->temp_add_over[nr] =
+ AS99127_TEMP_ADD_TO_REG(results[0]);
+ else
+ data->temp_add_over[nr] =
+ TEMP_ADD_TO_REG(results[0]);
+ w83781d_write_value(client,
+ nr ? W83781D_REG_TEMP3_OVER :
+ W83781D_REG_TEMP2_OVER,
+ data->temp_add_over[nr]);
+ }
+ if (*nrels_mag >= 2) {
+ if (data->type == as99127f)
+ data->temp_add_hyst[nr] =
+ AS99127_TEMP_ADD_TO_REG(results[1]);
+ else
+ data->temp_add_hyst[nr] =
+ TEMP_ADD_TO_REG(results[1]);
+ w83781d_write_value(client,
+ nr ? W83781D_REG_TEMP3_HYST :
+ W83781D_REG_TEMP2_HYST,
+ data->temp_add_hyst[nr]);
+ }
+ }
+}
+
+
+void w83781d_vid(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 3;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = vid_from_reg(data->vid, data->vrm);
+ *nrels_mag = 1;
+ }
+}
+
+void w83781d_vrm(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 1;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ results[0] = data->vrm;
+ *nrels_mag = 1;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1)
+ data->vrm = results[0];
+ }
+}
+
+void w83781d_alarms(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = ALARMS_FROM_REG(data->alarms);
+ *nrels_mag = 1;
+ }
+}
+
+void w83781d_beep(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int val;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = BEEP_ENABLE_FROM_REG(data->beep_enable);
+ results[1] = BEEPS_FROM_REG(data->beeps);
+ *nrels_mag = 2;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 2) {
+ data->beeps = BEEPS_TO_REG(results[1]);
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
+ data->beeps & 0xff);
+ if ((data->type != w83781d) &&
+ (data->type != as99127f)) {
+ w83781d_write_value(client,
+ W83781D_REG_BEEP_INTS3,
+ ((data-> beeps) >> 16) &
+ 0xff);
+ }
+ val = (data->beeps >> 8) & 0x7f;
+ } else if (*nrels_mag >= 1)
+ val =
+ w83781d_read_value(client,
+ W83781D_REG_BEEP_INTS2) &
+ 0x7f;
+ if (*nrels_mag >= 1) {
+ data->beep_enable = BEEP_ENABLE_TO_REG(results[0]);
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
+ val | data->beep_enable << 7);
+ }
+ }
+}
+
+/* w83697hf only has two fans */
+void w83781d_fan_div(struct i2c_client *client, int operation,
+ int ctl_name, int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int old, old2, old3 = 0;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = DIV_FROM_REG(data->fan_div[0]);
+ results[1] = DIV_FROM_REG(data->fan_div[1]);
+ if (data->type == w83697hf) {
+ *nrels_mag = 2;
+ } else {
+ results[2] = DIV_FROM_REG(data->fan_div[2]);
+ *nrels_mag = 3;
+ }
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ old = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
+ /* w83781d and as99127f don't have extended divisor bits */
+ if ((data->type != w83781d) && data->type != as99127f) {
+ old3 =
+ w83781d_read_value(client, W83781D_REG_VBAT);
+ }
+ if (*nrels_mag >= 3 && data->type != w83697hf) {
+ data->fan_div[2] =
+ DIV_TO_REG(results[2], data->type);
+ old2 = w83781d_read_value(client, W83781D_REG_PIN);
+ old2 =
+ (old2 & 0x3f) | ((data->fan_div[2] & 0x03) << 6);
+ w83781d_write_value(client, W83781D_REG_PIN, old2);
+ if ((data->type != w83781d) &&
+ (data->type != as99127f)) {
+ old3 =
+ (old3 & 0x7f) |
+ ((data->fan_div[2] & 0x04) << 5);
+ }
+ }
+ if (*nrels_mag >= 2) {
+ data->fan_div[1] =
+ DIV_TO_REG(results[1], data->type);
+ old =
+ (old & 0x3f) | ((data->fan_div[1] & 0x03) << 6);
+ if ((data->type != w83781d) &&
+ (data->type != as99127f)) {
+ old3 =
+ (old3 & 0xbf) |
+ ((data->fan_div[1] & 0x04) << 4);
+ }
+ }
+ if (*nrels_mag >= 1) {
+ data->fan_div[0] =
+ DIV_TO_REG(results[0], data->type);
+ old =
+ (old & 0xcf) | ((data->fan_div[0] & 0x03) << 4);
+ w83781d_write_value(client, W83781D_REG_VID_FANDIV,
+ old);
+ if ((data->type != w83781d) &&
+ (data->type != as99127f)) {
+ old3 =
+ (old3 & 0xdf) |
+ ((data->fan_div[0] & 0x04) << 3);
+ w83781d_write_value(client,
+ W83781D_REG_VBAT,
+ old3);
+ }
+ }
+ }
+}
+
+void w83781d_pwm(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int nr = 1 + ctl_name - W83781D_SYSCTL_PWM1;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ w83781d_update_client(client);
+ results[0] = PWM_FROM_REG(data->pwm[nr - 1]);
+ *nrels_mag = 1;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1) {
+ data->pwm[nr - 1] = PWM_TO_REG(results[0]);
+ w83781d_write_value(client, W83781D_REG_PWM(nr),
+ data->pwm[nr - 1]);
+ }
+ }
+}
+
+void w83781d_sens(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int nr = 1 + ctl_name - W83781D_SYSCTL_SENS1;
+ u8 tmp;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ results[0] = data->sens[nr - 1];
+ *nrels_mag = 1;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag >= 1) {
+ switch (results[0]) {
+ case 1: /* PII/Celeron diode */
+ tmp = w83781d_read_value(client,
+ W83781D_REG_SCFG1);
+ w83781d_write_value(client,
+ W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr -
+ 1]);
+ tmp = w83781d_read_value(client,
+ W83781D_REG_SCFG2);
+ w83781d_write_value(client,
+ W83781D_REG_SCFG2,
+ tmp | BIT_SCFG2[nr -
+ 1]);
+ data->sens[nr - 1] = results[0];
+ break;
+ case 2: /* 3904 */
+ tmp = w83781d_read_value(client,
+ W83781D_REG_SCFG1);
+ w83781d_write_value(client,
+ W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr -
+ 1]);
+ tmp = w83781d_read_value(client,
+ W83781D_REG_SCFG2);
+ w83781d_write_value(client,
+ W83781D_REG_SCFG2,
+ tmp & ~BIT_SCFG2[nr -
+ 1]);
+ data->sens[nr - 1] = results[0];
+ break;
+ case W83781D_DEFAULT_BETA: /* thermistor */
+ tmp = w83781d_read_value(client,
+ W83781D_REG_SCFG1);
+ w83781d_write_value(client,
+ W83781D_REG_SCFG1,
+ tmp & ~BIT_SCFG1[nr -
+ 1]);
+ data->sens[nr - 1] = results[0];
+ break;
+ default:
+ printk
+ (KERN_ERR "w83781d.o: Invalid sensor type %ld; must be 1, 2, or %d\n",
+ results[0], W83781D_DEFAULT_BETA);
+ break;
+ }
+ }
+ }
+}
+
+#ifdef W83781D_RT
+void w83781d_rt(struct i2c_client *client, int operation, int ctl_name,
+ int *nrels_mag, long *results)
+{
+ struct w83781d_data *data = client->data;
+ int nr = 1 + ctl_name - W83781D_SYSCTL_RT1;
+ int i;
+
+ if (operation == SENSORS_PROC_REAL_INFO)
+ *nrels_mag = 0;
+ else if (operation == SENSORS_PROC_REAL_READ) {
+ for (i = 0; i < 32; i++) {
+ results[i] = data->rt[nr - 1][i];
+ }
+ *nrels_mag = 32;
+ } else if (operation == SENSORS_PROC_REAL_WRITE) {
+ if (*nrels_mag > 32)
+ *nrels_mag = 32;
+ for (i = 0; i < *nrels_mag; i++) {
+ /* fixme: no bounds checking 0-255 */
+ data->rt[nr - 1][i] = results[i];
+ w83781d_write_value(client, W83781D_REG_RT_IDX, i);
+ w83781d_write_value(client, W83781D_REG_RT_VAL,
+ data->rt[nr - 1][i]);
+ }
+ }
+}
+#endif
+
+int __init sensors_w83781d_init(void)
+{
+ return i2c_add_driver(&w83781d_driver);
+}
+
+static void __exit sensors_w83781d_exit(void)
+{
+ i2c_del_driver(&w83781d_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83781D driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83781d_init);
+module_exit(sensors_w83781d_exit);
^ permalink raw reply [flat|nested] 5+ messages in thread