From: "J.A. Magallon" <jamagallon@able.es>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>
Cc: Paul Rolland <rol@witbe.net>, linux-kernel@vger.kernel.org
Subject: Re: [2.5.54] Oops IDE-SCSI and failure AIC7xxx
Date: Mon, 6 Jan 2003 01:31:45 +0100 [thread overview]
Message-ID: <20030106003145.GC2462@werewolf.able.es> (raw)
In-Reply-To: <547740000.1041797991@aslan.scsiguy.com>; from gibbs@scsiguy.com on Sun, Jan 05, 2003 at 21:19:51 +0100
On 2003.01.05 Justin T. Gibbs wrote:
> > I've been looking at the PCI option in the BIOS...
>
> ...
>
> > Could it be PCI 2.1 Support ? Don't think because I've restarted
> > with it disabled, and I still have the same problem...
>
> No. That shouldn't make a difference.
>
I also get this on a SuperMicro P6DGU:
SCSI subsystem driver Revision: 1.00
aic7xxx: PCI Device 0:14:0 failed memory mapped test. Using PIO.
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi0: PCI error Interrupt at seqaddr = 0x2
scsi0: Signaled a Target Abort
(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
(scsi0:A:1): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
Vendor: IBM Model: DDYS-T09170N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: IC35L018UWD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
werewolf:~/in# lspci -v
00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge
Flags: bus master, medium devsel, latency 64
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fca00000-feafffff
Prefetchable memory behind bridge: dc800000-ec8fffff
...
00:0e.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01)
Subsystem: Adaptec 2940U2W SCSI Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
BIST result: 00
I/O ports at e800 [size=256]
Memory at febff000 (64-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
???
--
J.A. Magallon <jamagallon@able.es> \ Software is like sex:
werewolf.able.es \ It's better when it's free
Mandrake Linux release 9.1 (Cooker) for i586
Linux 2.4.21-pre2-jam2 (gcc 3.2.1 (Mandrake Linux 9.1 3.2.1-2mdk))
next prev parent reply other threads:[~2003-01-06 0:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-05 11:01 [2.5.54] Oops IDE-SCSI and failure AIC7xxx Paul Rolland
2003-01-05 15:50 ` Justin T. Gibbs
2003-01-05 15:55 ` Paul Rolland
2003-01-05 16:52 ` Justin T. Gibbs
2003-01-05 19:57 ` Paul Rolland
2003-01-05 20:19 ` Justin T. Gibbs
2003-01-06 0:31 ` J.A. Magallon [this message]
2003-01-06 2:43 ` David Lang
2003-01-06 3:08 ` Justin T. Gibbs
2003-01-06 2:59 ` David Lang
2003-01-06 3:29 ` Justin T. Gibbs
2003-01-06 4:36 ` David Lang
2003-01-06 5:00 ` Justin T. Gibbs
2003-01-06 5:13 ` David Lang
2003-01-06 16:18 ` Justin T. Gibbs
2003-01-06 21:00 ` Ion Badulescu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030106003145.GC2462@werewolf.able.es \
--to=jamagallon@able.es \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rol@witbe.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox