From: Lukas Hejtmanek <xhejtman@mail.muni.cz>
To: Zwane Mwaikambo <zwane@holomorphy.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5.54: ide-scsi still buggy?
Date: Wed, 8 Jan 2003 21:25:42 +0100 [thread overview]
Message-ID: <20030108202542.GA870@mail.muni.cz> (raw)
In-Reply-To: <Pine.LNX.4.50.0301072116450.4046-100000@montezuma.mastecende.com>
On Tue, Jan 07, 2003 at 09:17:46PM -0500, Zwane Mwaikambo wrote:
> > It freezes kernel (sysrq do nothing) after lines:
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > Vendor: TEAC Model: CD-W512EB Rev: 2
> > Type: CD-ROM ANSI SCSI revision: 02
> > scsi scan: host 0 channel 0 id 0 lun 0 identifier too long, length 60, max 50. Device might be improperly identified.
> >
> > while attaching it to /dev/hde works ok. Why?
>
> This has been observed to cause an oops on some boxes and nothing on mine,
> try this patch from Andries
Acctualy this patch caused only I do not see "scsi scan: host 0 channel 0 id
0 lun 0 identifier too long, length 60, max 50. Device might be improperly
identified."
how ever after above message kernel causes hard hw lockup. IDE activity
LED is turned on but nothing else works. (nor sysrq)
I believe that code that report this message causes hw lockup.
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
--
Lukáš Hejtmánek
next prev parent reply other threads:[~2003-01-08 20:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-08 1:40 2.5.54: ide-scsi still buggy? Lukas Hejtmanek
2003-01-08 2:17 ` Zwane Mwaikambo
2003-01-08 20:25 ` Lukas Hejtmanek [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-01-08 22:26 Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030108202542.GA870@mail.muni.cz \
--to=xhejtman@mail.muni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=zwane@holomorphy.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox