Linux version 2.5.56 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #33 Sun Jan 12 22:08:49 EST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: root=/dev/hde3 console=tty0 console=ttyS0,38400 idebus=33 hdb=none hdf=none hdh=none vga=ask ide_setup: idebus=33 ide_setup: hdb=none ide_setup: hdf=none ide_setup: hdh=none Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 400.811 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 790.52 BogoMIPS Memory: 515888k/524224k available (1321k kernel code, 7592k reserved, 776k data, 80k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: L2 Cache: 256K (32 bytes/line) CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D+ Processor stepping 01 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.94 (c) Adam Belay pnp: Enabling Plug and Play Card Services. PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0586] at 00:07.0 aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded Initializing Cryptographic API Activating ISA DMA hang workarounds. Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A pty: 256 Unix98 ptys configured Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA MVP3 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized mga 3.1.0 20021029 on minor 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive hda: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive hdd: HP COLORADO 20GB, ATAPI TAPE drive hdc: DMA disabled hdd: DMA disabled ide1 at 0x170-0x177,0x376 on irq 15 PDC20267: IDE controller at PCI slot 00:09.0 PCI: Found IRQ 12 for device 00:09.0 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xeb000000 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive ide2 at 0xac00-0xac07,0xb002 on irq 12 hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive ide3 at 0xb400-0xb407,0xb802 on irq 12 hda: host protected area => 1 hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33) hda: hda1 hda2 hda3 hda4 < hda5 > hde: host protected area => 1 hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100) hde: hde1 hde2 hde3 hde4 < hde5 > hdg: host protected area => 1 hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100) hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 > drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 uhci-hcd 00:07.2: VIA Technologies, In USB uhci-hcd 00:07.2: irq 10, io base 0000a400 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected mice: PS/2 mouse device common for all mice input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide2(33,3), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide2(33,3)) for (ide2(33,3)) hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 1, assigned address 2 hub 1-1:0: USB hub found hub 1-1:0: 4 ports detected hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 hub 1-0:0: new USB device on port 2, assigned address 3 hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-1:0: new USB device on port 1, assigned address 4 hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101 hub 1-1:0: new USB device on port 4, assigned address 5 reiserfs: replayed 27 transactions in 2 seconds Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 80k freed Adding 393552k swap on /dev/hda1. Priority:1 extents:1 Adding 393584k swap on /dev/hde1. Priority:1 extents:1 Adding 393584k swap on /dev/hdg1. Priority:1 extents:1 Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Found IRQ 11 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 9, want irq 11 tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1. Execing /sbin/hotplug eth0: Digital DS21140 Tulip rev 34 at 0xc000, 00:C0:F0:32:30:70, IRQ 9. via-rhine.c:v1.10-LK1.1.15 November-22-2002 Written by Donald Becker http://www.scyld.com/network/via-rhine.html PCI: Found IRQ 9 for device 00:08.0 IRQ routing conflict for 00:08.0, have irq 11, want irq 9 Execing /sbin/hotplug eth1: VIA VT86C100A Rhine at 0xed120000, 00:80:c8:f9:ee:ba, IRQ 11. eth1: MII PHY found at address 8, status 0x782d advertising 05e1 Link 0000. IPv4 over IPv4 tunneling driver Execing /sbin/hotplug warning: process `update' used the obsolete bdflush system call Fix your initscripts? Execing /sbin/modprobe parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) Module parport cannot be unloaded due to unsafe usage in include/linux/module.h:424 Module parport_pc cannot be unloaded due to unsafe usage in include/linux/module.h:424 parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 PPP BSD Compression module registered Execing /sbin/hotplug Execing /sbin/modprobe Execing /sbin/modprobe found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,5), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,5)) for (ide0(3,5)) reiserfs: replayed 24 transactions in 2 seconds Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide2(33,5), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide2(33,5)) for (ide2(33,5)) reiserfs: replayed 5 transactions in 0 seconds Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide3(34,3), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide3(34,3)) for (ide3(34,3)) reiserfs: replayed 26 transactions in 0 seconds Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide3(34,5), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide3(34,5)) for (ide3(34,5)) reiserfs: replayed 1 transactions in 0 seconds Using r5 hash to sort names EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Execing /sbin/modprobe Execing /sbin/modprobe ip_tables: (C) 2000-2002 Netfilter core team Execing /sbin/modprobe Module ip_tables cannot be unloaded due to unsafe usage in include/linux/module.h:424 Module tulip cannot be unloaded due to unsafe usage in include/linux/module.h:424 Execing /sbin/modprobe drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver ip_conntrack version 2.1 (4095 buckets, 32760 max) - 304 bytes per conntrack SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. PCI: Found IRQ 9 for device 00:0b.0 Crystal 4280/46xx + AC97 Audio, version 1.28.32, 20:59:51 Jan 12 2003 cs46xx: Card found at 0xed121000 and 0xed000000, IRQ 9 cs46xx: Card without SSID set (0000:0000) at 0xed121000/0xed000000, IRQ 9 ac97_codec: AC97 Audio codec, id: CRY3 (Cirrus Logic CS4297) lp0: using parport0 (polling). Execing /sbin/modprobe Module ppp_async cannot be unloaded due to unsafe usage in include/linux/module.h:424 Execing /sbin/hotplug Module af_packet cannot be unloaded due to unsafe usage in include/linux/module.h:424 Execing /sbin/modprobe Software Watchdog Timer: 0.06, soft_margin: 60 sec, nowayout: 0 Module bsd_comp cannot be unloaded due to unsafe usage in include/linux/module.h:424 Execing /sbin/modprobe PPP Deflate Compression module registered Module ppp_deflate cannot be unloaded due to unsafe usage in include/linux/module.h:424 Module ipchains cannot be unloaded due to unsafe usage in include/linux/module.h:424 Execing /sbin/modprobe drivers/usb/core/usb.c: deregistering driver hid drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver usb 1-2: USB disconnect, address 3 Execing /sbin/hotplug Execing /sbin/hotplug hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 hub 1-0:0: new USB device on port 2, assigned address 6 Execing /sbin/hotplug Execing /sbin/hotplug input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-00:07.2-2 Execing /sbin/hotplug Execing /sbin/modprobe Module cs46xx cannot be unloaded due to unsafe usage in include/linux/module.h:424 Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe Execing /sbin/modprobe