From: Jacek Kawa <jfk@zeus.polsl.gliwice.pl>
To: linux-kernel@vger.kernel.org, mdharm-usb@one-eyed-alien.net
Subject: Re: 2.4.20/2.4.21-pre3 usb Oops
Date: Thu, 16 Jan 2003 18:14:51 +0100 [thread overview]
Message-ID: <20030116171451.GA1647@finwe.eu.org> (raw)
In-Reply-To: <20030115233303.GA26255@kroah.com>
Greg KH wrote:
> > I've got ide disk connected as usb-storage device.
> > Oops is reproductable (output from ksymoops below).
> > I had to copy it from screen (I hope effects are
> > reliable).
> Can you switch UHCI drivers and see if the problem is still there?
Hello!
It's better (no oops anyway). I'm not sure if problem
it's still usb-related now (?).
BTW. I booted to 2.5.58 (CONFIG_USB_UHCI_HCD=m)
and there was no oops, but fdisk fell in 'D' state. I can
try to extract something more from logs if it could be helpful.
2.4.20, uhci:
-------------
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface ce462700
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 80043265 512-byte hdwr sectors (40982 MB)
sda: Write Protect is off
sda: sda1 sda2 sda3 sda4
after fdisk /dev/sda
--------------------
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
usb.c: ignoring set_interface for dev 2, iface 0, alt 0
scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
I/O error: dev 08:00, sector 0
bye
PS
--
Jacek Kawa
prev parent reply other threads:[~2003-01-16 17:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-15 11:12 2.4.20/2.4.21-pre3 usb Oops Jacek Kawa
2003-01-15 19:43 ` Jacek Kawa
2003-01-15 23:33 ` Greg KH
2003-01-16 17:14 ` Jacek Kawa [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030116171451.GA1647@finwe.eu.org \
--to=jfk@zeus.polsl.gliwice.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=mdharm-usb@one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox