* 2.5.59 - Compaq 900z - No Go..
@ 2003-01-17 16:49 Mark F.
2003-01-18 13:28 ` Dave Jones
2003-01-21 14:22 ` Hirling Endre
0 siblings, 2 replies; 6+ messages in thread
From: Mark F. @ 2003-01-17 16:49 UTC (permalink / raw)
To: linux-kernel
Hello
After trying the recent latest release, the compilation mode is an ok except
for some warning and module install issues.
Anyways, when I configure the kernel into the boot loader, and I try to boot
it up it fails after each repeated attempt. All that happens is that it
starts the Kernel Boot Up, gets to the line that says "Uncompressing
Kernel...." and the it just hard reboots the computer. Does this after each
repeated chance. Currently trying to play around with whch drivers I am
loading into the kernel to see if I am able to eliminate something
Computer is basically an AMD Athlon 1600 with the Radeon IGP Chipset for
those who don't know. (Yes, with previous builds, think was 2.5.54 is
booted, and works on 2.4.21-pre3)
Mark
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.5.59 - Compaq 900z - No Go..
2003-01-17 16:49 2.5.59 - Compaq 900z - No Go Mark F.
@ 2003-01-18 13:28 ` Dave Jones
2003-01-18 15:20 ` Alexander Hoogerhuis
2003-01-21 14:22 ` Hirling Endre
1 sibling, 1 reply; 6+ messages in thread
From: Dave Jones @ 2003-01-18 13:28 UTC (permalink / raw)
To: Mark F.; +Cc: linux-kernel
On Fri, Jan 17, 2003 at 11:49:10AM -0500, Mark F. wrote:
> Hello
>
> After trying the recent latest release, the compilation mode is an ok except
> for some warning and module install issues.
> Anyways, when I configure the kernel into the boot loader, and I try to boot
> it up it fails after each repeated attempt. All that happens is that it
> starts the Kernel Boot Up, gets to the line that says "Uncompressing
> Kernel...." and the it just hard reboots the computer. Does this after each
> repeated chance. Currently trying to play around with whch drivers I am
> loading into the kernel to see if I am able to eliminate something
>
> Computer is basically an AMD Athlon 1600 with the Radeon IGP Chipset for
> those who don't know. (Yes, with previous builds, think was 2.5.54 is
> booted, and works on 2.4.21-pre3)
My Compaq Evo 1015v did the same thing. I think it was disabling the PNP
stuff that made it work for me iirc.
Dave
--
| Dave Jones. http://www.codemonkey.org.uk
| SuSE Labs
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.5.59 - Compaq 900z - No Go..
2003-01-18 13:28 ` Dave Jones
@ 2003-01-18 15:20 ` Alexander Hoogerhuis
2003-01-18 15:21 ` Dave Jones
0 siblings, 1 reply; 6+ messages in thread
From: Alexander Hoogerhuis @ 2003-01-18 15:20 UTC (permalink / raw)
To: Dave Jones; +Cc: Mark F., linux-kernel
Dave Jones <davej@codemonkey.org.uk> writes:
> On Fri, Jan 17, 2003 at 11:49:10AM -0500, Mark F. wrote:
> > Hello
> >
> > After trying the recent latest release, the compilation mode is an ok except
> > for some warning and module install issues.
> > Anyways, when I configure the kernel into the boot loader, and I try to boot
> > it up it fails after each repeated attempt. All that happens is that it
> > starts the Kernel Boot Up, gets to the line that says "Uncompressing
> > Kernel...." and the it just hard reboots the computer. Does this after each
> > repeated chance. Currently trying to play around with whch drivers I am
> > loading into the kernel to see if I am able to eliminate something
> >
> > Computer is basically an AMD Athlon 1600 with the Radeon IGP Chipset for
> > those who don't know. (Yes, with previous builds, think was 2.5.54 is
> > booted, and works on 2.4.21-pre3)
>
> My Compaq Evo 1015v did the same thing. I think it was disabling the PNP
> stuff that made it work for me iirc.
>
Comapq Evo800c here, boots somewhat fine. 2.5.58 hung at
"Uncompressing, booting...", 2.5.59 did almost the same, but then I
noticed the disk actually doing stuff, and by waiting, up popped the
"login:" promt after a while, but nothing was printed to the console
during boot.
I have module-init-tools 0.9.9_pre1 installed, and get about 2000
lines in my /var/log/messages with mostly soudn and alsa related
symbols that doesn't resolve.
> Dave
mvh,
A
--
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.5.59 - Compaq 900z - No Go..
2003-01-18 15:20 ` Alexander Hoogerhuis
@ 2003-01-18 15:21 ` Dave Jones
2003-01-18 15:35 ` Alexander Hoogerhuis
0 siblings, 1 reply; 6+ messages in thread
From: Dave Jones @ 2003-01-18 15:21 UTC (permalink / raw)
To: Alexander Hoogerhuis; +Cc: Mark F., linux-kernel
On Sat, Jan 18, 2003 at 04:20:41PM +0100, Alexander Hoogerhuis wrote:
> > My Compaq Evo 1015v did the same thing. I think it was disabling the PNP
> > stuff that made it work for me iirc.
> Comapq Evo800c here, boots somewhat fine. 2.5.58 hung at
> "Uncompressing, booting...", 2.5.59 did almost the same, but then I
> noticed the disk actually doing stuff, and by waiting, up popped the
> "login:" promt after a while, but nothing was printed to the console
> during boot.
My Vaio does that, not sure whats going on there. But the Evo is dead.
doorstop. I've left it booting whilst I took a bath, and it was still
dead when I got out 8-)
Dave
--
| Dave Jones. http://www.codemonkey.org.uk
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.5.59 - Compaq 900z - No Go..
2003-01-18 15:21 ` Dave Jones
@ 2003-01-18 15:35 ` Alexander Hoogerhuis
0 siblings, 0 replies; 6+ messages in thread
From: Alexander Hoogerhuis @ 2003-01-18 15:35 UTC (permalink / raw)
To: Dave Jones; +Cc: Mark F., linux-kernel
Dave Jones <davej@codemonkey.org.uk> writes:
> On Sat, Jan 18, 2003 at 04:20:41PM +0100, Alexander Hoogerhuis wrote:
>
> > > My Compaq Evo 1015v did the same thing. I think it was disabling the PNP
> > > stuff that made it work for me iirc.
> > Comapq Evo800c here, boots somewhat fine. 2.5.58 hung at
> > "Uncompressing, booting...", 2.5.59 did almost the same, but then I
> > noticed the disk actually doing stuff, and by waiting, up popped the
> > "login:" promt after a while, but nothing was printed to the console
> > during boot.
>
> My Vaio does that, not sure whats going on there. But the Evo is dead.
> doorstop. I've left it booting whilst I took a bath, and it was still
> dead when I got out 8-)
>
Wrong kind of soap, I guess.
Is the problem with ALSA a FAQ? This is a part of what ends up in my
logs:
Jan 18 15:39:34 lapper kernel: snd_ac97_codec: Unknown symbol snd_iprintf
Jan 18 15:39:34 lapper kernel: snd_ac97_codec: Unknown symbol snd_kcalloc
Jan 18 15:39:34 lapper kernel: snd_ac97_codec: Unknown symbol snd_device_new
Jan 18 15:39:34 lapper kernel: snd_ac97_codec: Unknown symbol snd_info_create_card_entry
Jan 18 15:39:34 lapper kernel: snd_ac97_codec: Unknown symbol snd_info_unregister
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_info_register
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_ac97_resume
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_new
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_card_register
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_card_free
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_info_free_entry
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_ac97_set_rate
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_ac97_update_bits
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_ac97_mixer
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_verbose_printk
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_free_pci_pages
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_card_new
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_iprintf
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_kcalloc
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_set_ops
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_device_new
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_suspend_all
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_malloc_pci_pages
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pci_pages_for_all
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_info_create_card_entry
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_mpu401_uart_new
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_free_for_all
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_pcm_period_elapsed
Jan 18 15:39:34 lapper kernel: snd_intel8x0: Unknown symbol snd_info_unregister
Jan 18 15:39:38 lapper kernel: soundcore: Unknown symbol errno
[repeat ad nauseum]
> Dave
mvh,
A
--
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.5.59 - Compaq 900z - No Go..
2003-01-17 16:49 2.5.59 - Compaq 900z - No Go Mark F.
2003-01-18 13:28 ` Dave Jones
@ 2003-01-21 14:22 ` Hirling Endre
1 sibling, 0 replies; 6+ messages in thread
From: Hirling Endre @ 2003-01-21 14:22 UTC (permalink / raw)
To: lkml
On Fri, 2003-01-17 at 17:49, Mark F. wrote:
> Computer is basically an AMD Athlon 1600 with the Radeon IGP Chipset for
> those who don't know. (Yes, with previous builds, think was 2.5.54 is
> booted, and works on 2.4.21-pre3)
Did anyone get udma IDE and/or X with any other driver than "vesa"
working on this IGP beast? I just got a Fujitsu-Siemens Amilo A with the
same chipset and these two are giving me headache.
endre
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-01-21 14:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-17 16:49 2.5.59 - Compaq 900z - No Go Mark F.
2003-01-18 13:28 ` Dave Jones
2003-01-18 15:20 ` Alexander Hoogerhuis
2003-01-18 15:21 ` Dave Jones
2003-01-18 15:35 ` Alexander Hoogerhuis
2003-01-21 14:22 ` Hirling Endre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox