From: Osamu Tomita <tomita@cinet.co.jp>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCHSET] PC-9800 sub-arch (20/29) parport
Date: Sun, 19 Jan 2003 15:53:32 +0900 [thread overview]
Message-ID: <20030119065332.GS2965@yuzuki.cinet.co.jp> (raw)
In-Reply-To: <20030119051043.GA2662@yuzuki.cinet.co.jp>
This is patchset to support NEC PC-9800 subarchitecture
against 2.5.59 (20/29).
Parallel port support.
diff -Nru linux/drivers/parport/parport_pc.c linux98/drivers/parport/parport_pc.c
--- linux/drivers/parport/parport_pc.c 2002-12-16 11:08:22.000000000 +0900
+++ linux98/drivers/parport/parport_pc.c 2002-12-22 20:51:23.000000000 +0900
@@ -332,7 +332,10 @@
unsigned char parport_pc_read_status(struct parport *p)
{
- return inb (STATUS (p));
+ if (pc98 && p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+ return inb (STATUS (p));
}
void parport_pc_disable_irq(struct parport *p)
@@ -1644,6 +1647,8 @@
{
unsigned char r, w;
+ if (pc98 && pb->base == 0x40)
+ return PARPORT_MODE_PCSPP;
/*
* first clear an eventually pending EPP timeout
* I (sailer@ife.ee.ethz.ch) have an SMSC chipset
@@ -1777,6 +1782,9 @@
{
int ok = 0;
+ if (pc98 && pb->base == 0x40)
+ return 0; /* never support */
+
clear_epp_timeout(pb);
/* try to tri-state the buffer */
@@ -1908,6 +1916,9 @@
config & 0x80 ? "Level" : "Pulses");
configb = inb (CONFIGB (pb));
+ if (pc98 && (CONFIGB(pb) == 0x14d) && ((configb & 0x38) == 0x30))
+ configb = (configb & ~0x38) | 0x28; /* IRQ 14 */
+
printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
pb->base, config, configb);
printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
@@ -2048,6 +2059,9 @@
ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ if (pc98 && (CONFIGB(pb) == 0x14d) && (intrLine == 6))
+ intrLine = 5; /* IRQ 14 */
+
irq = lookup[intrLine];
ECR_WRITE (pb, oecr);
@@ -2212,7 +2226,14 @@
struct parport tmp;
struct parport *p = &tmp;
int probedirq = PARPORT_IRQ_NONE;
- if (check_region(base, 3)) return NULL;
+ if (pc98 && base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ if (check_region(base + i, 1)) return NULL;
+ } else {
+ if (check_region(base, 3)) return NULL;
+ }
+
priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
if (!priv) {
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
@@ -2245,7 +2266,7 @@
if (base_hi && !check_region(base_hi,3))
parport_ECR_present(p);
- if (base != 0x3bc) {
+ if (!pc98 && base != 0x3bc) {
if (!check_region(base+0x3, 5)) {
if (!parport_EPP_supported(p))
parport_ECPEPP_supported(p);
@@ -2343,7 +2364,12 @@
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
parport_proc_register(p);
- request_region (p->base, 3, p->name);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ request_region(p->base + i, 1, p->name);
+ } else
+ request_region (p->base, 3, p->name);
if (p->size > 3)
request_region (p->base + 3, p->size - 3, p->name);
if (p->modes & PARPORT_MODE_ECP)
@@ -2413,7 +2439,13 @@
free_dma(p->dma);
if (p->irq != PARPORT_IRQ_NONE)
free_irq(p->irq, p);
- release_region(p->base, 3);
+ if (pc98 && p->base == 0x40) {
+ int i;
+ for (i = 0; i < 8; i += 2)
+ release_region(p->base + i, 1);
+ } else
+ release_region(p->base, 3);
+
if (p->size > 3)
release_region(p->base + 3, p->size - 3);
if (p->modes & PARPORT_MODE_ECP)
@@ -2996,6 +3028,30 @@
{
int count = 0;
+ if (pc98) {
+ /* Set default resource settings for old style parport */
+ int base = 0x40;
+ int base_hi = 0;
+ int irq = PARPORT_IRQ_NONE;
+ int dma = PARPORT_DMA_NONE;
+
+ /* Check PC9800 old style parport */
+ outb(inb(0x149) & ~0x10, 0x149); /* disable IEEE1284 */
+ if (!(inb(0x149) & 0x10)) { /* IEEE1284 disabled ? */
+ outb(inb(0x149) | 0x10, 0x149); /* enable IEEE1284 */
+ if (inb(0x149) & 0x10) { /* IEEE1284 enabled ? */
+ /* Set default settings for IEEE1284 parport */
+ base = 0x140;
+ base_hi = 0x14c;
+ irq = 14;
+ /* dma = PARPORT_DMA_NONE; */
+ }
+ }
+
+ if (parport_pc_probe_port(base, base_hi, irq, dma, NULL))
+ count++;
+ }
+
if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
count++;
if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
diff -Nru linux/include/linux/parport_pc.h linux98/include/linux/parport_pc.h
--- linux/include/linux/parport_pc.h 2002-06-12 11:15:27.000000000 +0900
+++ linux98/include/linux/parport_pc.h 2002-08-19 14:13:09.000000000 +0900
@@ -119,6 +119,11 @@
#endif
ctr = (ctr & ~mask) ^ val;
ctr &= priv->ctr_writable; /* only write writable bits. */
+#ifdef CONFIG_X86_PC9800
+ if (p->base == 0x40 && ((priv->ctr) ^ ctr) & 0x01)
+ outb(0x0e | ((ctr & 0x01) ^ 0x01), 0x46);
+ else
+#endif /* CONFIG_X86_PC9800 */
outb (ctr, CONTROL (p));
priv->ctr = ctr; /* Update soft copy */
return ctr;
@@ -191,6 +196,11 @@
extern __inline__ unsigned char parport_pc_read_status(struct parport *p)
{
+#ifdef CONFIG_X86_PC9800
+ if (p->base == 0x40)
+ return ((inb(0x42) & 0x04) << 5) | PARPORT_STATUS_ERROR;
+ else
+#endif /* CONFIG_X86_PC9800 */
return inb(STATUS(p));
}
next prev parent reply other threads:[~2003-01-19 6:47 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-19 5:10 [PATCHSET] PC-9800 sub-arch (0/29) summary Osamu Tomita
2003-01-19 6:32 ` [PATCHSET] PC-9800 sub-arch (2/29) ac-update Osamu Tomita
2003-01-19 6:34 ` [PATCHSET] PC-9800 sub-arch (3/29) alsa Osamu Tomita
[not found] ` <s5hof6a4vz3.wl@alsa2.suse.de>
2003-01-21 11:37 ` Osamu Tomita
2003-01-21 11:41 ` Takashi Iwai
2003-01-19 6:36 ` [PATCHSET] PC-9800 sub-arch (4/29) apm Osamu Tomita
2003-01-19 6:37 ` [PATCHSET] PC-9800 sub-arch (5/29) core#1 Osamu Tomita
2003-01-19 6:37 ` [PATCHSET] PC-9800 sub-arch (6/29) ac-update Osamu Tomita
2003-01-19 6:38 ` [PATCHSET] PC-9800 sub-arch (7/29) console Osamu Tomita
2003-01-19 6:40 ` [PATCHSET] PC-9800 sub-arch (8/29) network cards Osamu Tomita
2003-01-19 6:42 ` [PATCHSET] PC-9800 sub-arch (9/29) ac-update Osamu Tomita
2003-01-19 6:44 ` [PATCHSET] PC-9800 sub-arch (10/29) fs, patition table Osamu Tomita
2003-01-19 6:45 ` [PATCHSET] PC-9800 sub-arch (11/29) ac-update Osamu Tomita
2003-01-19 6:46 ` [PATCHSET] PC-9800 sub-arch (12/29) ac-update Osamu Tomita
2003-01-19 6:47 ` [PATCHSET] PC-9800 sub-arch (13/29) IDE Osamu Tomita
2003-01-19 6:48 ` [PATCHSET] PC-9800 sub-arch (14/29) core#2 Osamu Tomita
2003-01-19 6:49 ` [PATCHSET] PC-9800 sub-arch (15/29) ac-update Osamu Tomita
2003-01-19 6:50 ` [PATCHSET] PC-9800 sub-arch (16/29) input Osamu Tomita
2003-01-19 6:51 ` [PATCHSET] PC-9800 sub-arch (17/29) kernel Osamu Tomita
2003-01-19 6:51 ` [PATCHSET] PC-9800 sub-arch (18/29) ac-update Osamu Tomita
2003-01-19 6:52 ` [PATCHSET] PC-9800 sub-arch (19/29) ac-update Osamu Tomita
2003-01-19 6:53 ` Osamu Tomita [this message]
2003-01-19 6:54 ` [PATCHSET] PC-9800 sub-arch (21/29) ac-update Osamu Tomita
2003-01-19 6:55 ` [PATCHSET] PC-9800 sub-arch (22/29) PCI Osamu Tomita
2003-01-19 6:56 ` [PATCHSET] PC-9800 sub-arch (23/29) PCMCIA Osamu Tomita
2003-01-19 6:57 ` [PATCHSET] PC-9800 sub-arch (24/29) PNP Osamu Tomita
2003-01-19 6:58 ` [PATCHSET] PC-9800 sub-arch (25/29) SCSI Osamu Tomita
2003-01-19 6:59 ` [PATCHSET] PC-9800 sub-arch (26/29) ac-update Osamu Tomita
2003-01-19 6:59 ` [PATCHSET] PC-9800 sub-arch (27/29) serial Osamu Tomita
2003-01-19 7:00 ` [PATCHSET] PC-9800 sub-arch (28/29) SMP Osamu Tomita
2003-01-19 7:02 ` [PATCHSET] PC-9800 sub-arch (29/29) ac-update Osamu Tomita
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030119065332.GS2965@yuzuki.cinet.co.jp \
--to=tomita@cinet.co.jp \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox