Status of ide-cdrom writing?

Status of ide-cdrom writing?

[Gregoire Favre]

Hello,

I sent this email to the cdwrite ml a while ago, and the conclusion was
that it was a kernel bug... so I forward here ;-)

I got the same result with 2.5.58 (I need to compil a 2.5.59...).

Thank you very much ;-)

----- Forwarded message from Gregoire Favre <greg@ulima.unil.ch> -----

Date: Sun, 12 Jan 2003 22:58:50 +0100
From: Gregoire Favre <greg@ulima.unil.ch>
To: cdwrite@other.debian.org
Subject: Status of ide writing?

Hello,

is it possible to burn without idescsi under 2.5.56?

I got:

Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Unlocked features: ProDVD Clone 
Limited  features: speed 
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : 
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-500A '
Revision       : '1.0f'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 8126464 = 7936 KB
FIFO size      : 67108864 = 65536 KB
Track 01: data  3502 MB        
Total size:     3502 MB = 1793056 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 505440
Starting to write CD/DVD at speed 1 in real SAO mode for single session.
Last chance to quit, starting real write in 9 seconds.  0.28% done, estimate finish Sun Jan 12 22:32:14 2003
  0.56% done, estimate finish Sun Jan 12 22:29:15 2003
  0.84% done, estimate finish Sun Jan 12 22:28:15 2003
  1.12% done, estimate finish Sun Jan 12 22:27:45 2003
   8 seconds.  1.39% done, estimate finish Sun Jan 12 22:28:39 2003
  1.67% done, estimate finish Sun Jan 12 22:28:15 2003
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01:    4 of 3502 MB written (fifo  99%)  13.1x.cdrecord-prodvd: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 08 B8 00 00 1F 00
status: 0x1 (GOOD STATUS)
resid: 63488
cmd finished after 0.011s timeout 100s

write track data: error after 4571136 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing  time:    5.315s
Average write speed 501.9x.
Fixating...
Fixating time:   84.976s
cdrecord-prodvd: fifo had 1095 puts and 73 gets.
cdrecord-prodvd: fifo was 0 times empty and 7 times full, min fill was 99%.
Exit 254

Should I compil again with ide-scsi?

Thank you very much,

	Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch

Re: Status of ide-cdrom writing?

[Paul E. Erkkila]

I can confirm it worked this morning with 2.5.58.

cdrecord --version
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling

uname -a
Linux nipplehead 2.5.58 #77 Thu Jan 16 02:57:13 GMT 2003 i686 AMD 
Athlon(TM) XP2000+ AuthenticAMD GNU/Linux

I do know vcdxrip hasn't worked since 2.5.42 or so.

This is a 1/2 gentoo, 1/2 my fault box.

-pee


Gregoire Favre wrote:

>Hello,
>
>I sent this email to the cdwrite ml a while ago, and the conclusion was
>that it was a kernel bug... so I forward here ;-)
>
>I got the same result with 2.5.58 (I need to compil a 2.5.59...).
>
>Thank you very much ;-)
>
>----- Forwarded message from Gregoire Favre <greg@ulima.unil.ch> -----
>
>Date: Sun, 12 Jan 2003 22:58:50 +0100
>From: Gregoire Favre <greg@ulima.unil.ch>
>To: cdwrite@other.debian.org
>Subject: Status of ide writing?
>
>Hello,
>
>is it possible to burn without idescsi under 2.5.56?
>
>I got:
>
>Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
>Unlocked features: ProDVD Clone 
>Limited  features: speed 
>This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
>TOC Type: 1 = CD-ROM
>scsidev: '/dev/hdc'
>devname: '/dev/hdc'
>scsibus: -2 target: -2 lun: -2
>Warning: Open by 'devname' is unintentional and not supported.
>Linux sg driver version: 3.5.27
>Using libscg version 'schily-0.7'
>Driveropts: 'burnfree'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 2
>Response Format: 2
>Capabilities   : 
>Vendor_info    : 'SONY    '
>Identifikation : 'DVD RW DRU-500A '
>Revision       : '1.0f'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags   : DVD SWABAUDIO BURNFREE 
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 8126464 = 7936 KB
>FIFO size      : 67108864 = 65536 KB
>Track 01: data  3502 MB        
>Total size:     3502 MB = 1793056 sectors
>Current Secsize: 2048
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 505440
>Starting to write CD/DVD at speed 1 in real SAO mode for single session.
>Last chance to quit, starting real write in 9 seconds.  0.28% done, estimate finish Sun Jan 12 22:32:14 2003
>  0.56% done, estimate finish Sun Jan 12 22:29:15 2003
>  0.84% done, estimate finish Sun Jan 12 22:28:15 2003
>  1.12% done, estimate finish Sun Jan 12 22:27:45 2003
>   8 seconds.  1.39% done, estimate finish Sun Jan 12 22:28:39 2003
>  1.67% done, estimate finish Sun Jan 12 22:28:15 2003
>   0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>BURN-Free is ON.
>Starting new track at sector: 0
>Track 01:    4 of 3502 MB written (fifo  99%)  13.1x.cdrecord-prodvd: Input/output error. write_g1: scsi sendcmd: no error
>CDB:  2A 00 00 00 08 B8 00 00 1F 00
>status: 0x1 (GOOD STATUS)
>resid: 63488
>cmd finished after 0.011s timeout 100s
>
>write track data: error after 4571136 bytes
>Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
>Writing  time:    5.315s
>Average write speed 501.9x.
>Fixating...
>Fixating time:   84.976s
>cdrecord-prodvd: fifo had 1095 puts and 73 gets.
>cdrecord-prodvd: fifo was 0 times empty and 7 times full, min fill was 99%.
>Exit 254
>
>Should I compil again with ide-scsi?
>
>Thank you very much,
>
>	Grégoire
>________________________________________________________________
>http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/
>  
>

Re: Status of ide-cdrom writing?

[Gregoire Favre]

On Sun, Jan 19, 2003 at 03:00:44PM +0000, Paul E. Erkkila wrote:

> I can confirm it worked this morning with 2.5.58.
> 
> cdrecord --version
> Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
> 
> uname -a
> Linux nipplehead 2.5.58 #77 Thu Jan 16 02:57:13 GMT 2003 i686 AMD 
> Athlon(TM) XP2000+ AuthenticAMD GNU/Linux
> 
> I do know vcdxrip hasn't worked since 2.5.42 or so.
> 
> This is a 1/2 gentoo, 1/2 my fault box.

Well, lots of people have CD-writer working, as you don't tell which
unit you have, I don't know wheter it's a CD or a DVD writer one???

And are you really not using ide-scsi?

Is there anybody which has success with DVD-writer under 2.5.59 without
ide-scsi?

Thank you very much,

	Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch

Re: Status of ide-cdrom writing?

[Rudmer van Dijk]

On Sunday 19 January 2003 16:24, Gregoire Favre wrote:
> On Sun, Jan 19, 2003 at 03:00:44PM +0000, Paul E. Erkkila wrote:
> 
> > I can confirm it worked this morning with 2.5.58.
> > 
> > cdrecord --version
> > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
> > 
> > uname -a
> > Linux nipplehead 2.5.58 #77 Thu Jan 16 02:57:13 GMT 2003 i686 AMD 
> > Athlon(TM) XP2000+ AuthenticAMD GNU/Linux
> > 
> > I do know vcdxrip hasn't worked since 2.5.42 or so.
> > 
> > This is a 1/2 gentoo, 1/2 my fault box.
> 
> Well, lots of people have CD-writer working, as you don't tell which
> unit you have, I don't know wheter it's a CD or a DVD writer one???
> 
> And are you really not using ide-scsi?
> 
> Is there anybody which has success with DVD-writer under 2.5.59 without
> ide-scsi?

yep:

Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "/dev/hdc" 
fs=4096k -v driveropts=burnfree  speed=16 -eject -pad tsize=14928s -

scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Cdrecord 1.11a40 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8240B '
Revision       : '1.06'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 6037504 = 5896 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    29 MB         padsize:   30 KB
Total size:       33 MB (03:19.26) = 14945 sectors
Lout start:       33 MB (03:21/20) = 14945 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in:  -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low:  4 1T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 00 00 00
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 321130
Starting to write CD/DVD at speed 10 in real TAO mode for single session.
                0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0

Track 01: writing  30 KB of pad data.
Track 01: Total bytes read/written: 30572544/30603264 (14943 sectors).
Writing  time:   27.663s
Average write speed   7.2x.
Min drive buffer fill was 99%
Fixating...
Fixating time:   25.951s

to check that it really worked:

rudmer:~ # mount /mnt/cdrom/
rudmer:~ # ls /mnt/cdrom/
test_file_for_burning
rudmer:~ # cmp test_file_for_burning /mnt/cdrom/test_file_for_burning
rudmer:~ # 

so it works for me(TM)...

	Rudmer

Re: Status of ide-cdrom writing?

[Gregoire Favre]

On Sun, Jan 19, 2003 at 06:15:10PM +0100, Rudmer van Dijk wrote:

> > Is there anybody which has success with DVD-writer under 2.5.59 without
> > ide-scsi?
> 
> yep:
> ...
> Identifikation : 'CD-RW GCE-8240B '

I doubt you could write a DVD-R with such an unit, or am I wrong?
And I should also add with DAO/SAO ;-)

Thank you very much,

	Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch

Re: Status of ide-cdrom writing?

[Rudmer van Dijk]

On Sunday 19 January 2003 18:36, Gregoire Favre wrote:
> On Sun, Jan 19, 2003 at 06:15:10PM +0100, Rudmer van Dijk wrote:
> 
> > > Is there anybody which has success with DVD-writer under 2.5.59 without
> > > ide-scsi?
> > 
> > yep:
> > ...
> > Identifikation : 'CD-RW GCE-8240B '
> 
> I doubt you could write a DVD-R with such an unit, or am I wrong?
> And I should also add with DAO/SAO ;-)

oops, as i was reading this thread I thought lets try to burn again, as it 
did not work around 2.5.56.
your first question was: is it possible to burn without idescsi under 2.5.56? 
so i answered that one and so i mist the 'dvd' part in your second question...

if it can burn in sao/dao i don't know, will try that later

	Rudmer

Re: Status of ide-cdrom writing?

[Shane Shrybman]

Hi,

[..SNIP..]
 
Starting to write CD/DVD at speed 1 in real SAO mode for single session.
Last chance to quit, starting real write in 9 seconds. 0.28% done,
estimate finish Sun Jan 12 22:32:14 2003 
  0.56% done, estimate finish Sun Jan 12 22:29:15 2003 
  0.84% done, estimate finish Sun Jan 12 22:28:15 2003 
  1.12% done, estimate finish Sun Jan 12 22:27:45 2003 
   8 seconds. 1.39% done, estimate finish Sun Jan 12 22:28:39 2003 
  1.67% done, estimate finish Sun Jan 12 22:28:15 2003 
   0 seconds. Operation starts. 
Waiting for reader process to fill input buffer ... input buffer ready. 
BURN-Free is ON. 
Starting new track at sector: 0 
Track 01: 4 of 3502 MB written (fifo 99%) 13.1x.cdrecord-prodvd:
Input/output error. write_g1: scsi sendcmd: no error 
CDB: 2A 00 00 00 08 B8 00 00 1F 00 
status: 0x1 (GOOD STATUS) 
resid: 63488 
cmd finished after 0.011s timeout 100s 

I am using 2.5.59-mm2 and cd writing seems to work well if you don't use
SAO/DAO mode, use TAO instead. My drive claims to support SAO and it
used to work with ide-scsi but I get the same error as you if I try SAO
now.

Regards,

Shane 

Re: Status of ide-cdrom writing?

[Gregoire Favre]

On Sun, Jan 19, 2003 at 10:59:31AM -0500, Shane Shrybman wrote:

> I am using 2.5.59-mm2 and cd writing seems to work well if you don't use
> SAO/DAO mode, use TAO instead. My drive claims to support SAO and it
> used to work with ide-scsi but I get the same error as you if I try SAO
> now.

Hello,

thank you very much for the info ;-)
I find it a little strange to be forced to forget SAO...

	Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch