From: Adrian Bunk <bunk@fs.tum.de>
To: Rogier Wolff <R.E.Wolff@bitwizard.nl>,
Patrick van de Lageweg <patrick@bitwizard.nl>
Cc: linux-kernel@vger.kernel.org
Subject: [2.5 patch] rio: remove #include <linux/compatmac.h>
Date: Mon, 20 Jan 2003 00:39:50 +0100 [thread overview]
Message-ID: <20030119233950.GD12601@fs.tum.de> (raw)
The patch below removes #include <linux/compatmac.h> from
drivers/char/rio/*. The only file that actually used it was rio_linux.c
and I've expanded the #define's there.
I've tested the compilation with 2.5.59.
diffstat output:
rio_linux.c | 25 +++++++++++--------------
rioboot.c | 1 -
riocmd.c | 1 -
rioctrl.c | 1 -
rioinit.c | 1 -
riointr.c | 1 -
rioparam.c | 1 -
rioroute.c | 1 -
riotable.c | 1 -
riotty.c | 1 -
10 files changed, 11 insertions(+), 23 deletions(-)
cu
Adrian
--- linux-2.5.59-full/drivers/char/rio/riointr.c.old 2003-01-20 00:12:34.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/riointr.c 2003-01-20 00:12:54.000000000 +0100
@@ -48,7 +48,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
#include <linux/delay.h>
--- linux-2.5.59-full/drivers/char/rio/rioboot.c.old 2003-01-20 00:12:55.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/rioboot.c 2003-01-20 00:13:03.000000000 +0100
@@ -48,7 +48,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/rioinit.c.old 2003-01-20 00:13:05.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/rioinit.c 2003-01-20 00:13:16.000000000 +0100
@@ -47,7 +47,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/riocmd.c.old 2003-01-20 00:13:16.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/riocmd.c 2003-01-20 00:13:36.000000000 +0100
@@ -47,7 +47,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
#include "linux_compat.h"
--- linux-2.5.59-full/drivers/char/rio/riotty.c.old 2003-01-20 00:13:36.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/riotty.c 2003-01-20 00:13:44.000000000 +0100
@@ -51,7 +51,6 @@
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/rioctrl.c.old 2003-01-20 00:13:45.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/rioctrl.c 2003-01-20 00:13:53.000000000 +0100
@@ -47,7 +47,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/rioroute.c.old 2003-01-20 00:13:53.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/rioroute.c 2003-01-20 00:14:01.000000000 +0100
@@ -46,7 +46,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/riotable.c.old 2003-01-20 00:14:01.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/riotable.c 2003-01-20 00:14:09.000000000 +0100
@@ -48,7 +48,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/rioparam.c.old 2003-01-20 00:14:09.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/rioparam.c 2003-01-20 00:14:17.000000000 +0100
@@ -48,7 +48,6 @@
#include <linux/termios.h>
#include <linux/serial.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
--- linux-2.5.59-full/drivers/char/rio/rio_linux.c.old 2003-01-20 00:33:15.000000000 +0100
+++ linux-2.5.59-full/drivers/char/rio/rio_linux.c 2003-01-20 00:31:35.000000000 +0100
@@ -59,7 +59,6 @@
#include <linux/miscdevice.h>
#include <linux/init.h>
-#include <linux/compatmac.h>
#include <linux/generic_serial.h>
#if BITS_PER_LONG != 32
@@ -725,14 +724,14 @@
switch (cmd) {
#if 0
case TIOCGSOFTCAR:
- rc = Put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
+ rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
(unsigned int *) arg);
break;
#endif
case TIOCSSOFTCAR:
if ((rc = verify_area(VERIFY_READ, (void *) arg,
sizeof(int))) == 0) {
- Get_user(ival, (unsigned int *) arg);
+ get_user(ival, (unsigned int *) arg);
tty->termios->c_cflag =
(tty->termios->c_cflag & ~CLOCAL) |
(ival ? CLOCAL : 0);
@@ -784,7 +783,7 @@
case TIOCMBIS:
if ((rc = verify_area(VERIFY_READ, (void *) arg,
sizeof(unsigned int))) == 0) {
- Get_user(ival, (unsigned int *) arg);
+ get_user(ival, (unsigned int *) arg);
rio_setsignals(port, ((ival & TIOCM_DTR) ? 1 : -1),
((ival & TIOCM_RTS) ? 1 : -1));
}
@@ -792,7 +791,7 @@
case TIOCMBIC:
if ((rc = verify_area(VERIFY_READ, (void *) arg,
sizeof(unsigned int))) == 0) {
- Get_user(ival, (unsigned int *) arg);
+ get_user(ival, (unsigned int *) arg);
rio_setsignals(port, ((ival & TIOCM_DTR) ? 0 : -1),
((ival & TIOCM_RTS) ? 0 : -1));
}
@@ -800,7 +799,7 @@
case TIOCMSET:
if ((rc = verify_area(VERIFY_READ, (void *) arg,
sizeof(unsigned int))) == 0) {
- Get_user(ival, (unsigned int *) arg);
+ get_user(ival, (unsigned int *) arg);
rio_setsignals(port, ((ival & TIOCM_DTR) ? 1 : 0),
((ival & TIOCM_RTS) ? 1 : 0));
}
@@ -1126,7 +1125,7 @@
t, CNTRL_REG_GOODVALUE);
writel (CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
}
- my_iounmap (hwbase, rebase);
+ iounmap((char*) rebase);
}
#endif
@@ -1201,7 +1200,7 @@
hp = &p->RIOHosts[p->RIONumHosts];
hp->PaddrP = tint & PCI_BASE_ADDRESS_MEM_MASK;
- hp->Ivec = get_irq (pdev);
+ hp->Ivec = pdev->irq;
if (((1 << hp->Ivec) & rio_irqmask) == 0)
hp->Ivec = 0;
hp->CardP = (struct DpRam *)
@@ -1234,8 +1233,7 @@
p->RIONumHosts++;
found++;
} else {
- my_iounmap (p->RIOHosts[p->RIONumHosts].PaddrP,
- p->RIOHosts[p->RIONumHosts].Caddr);
+ iounmap((char*) (p->RIOHosts[p->RIONumHosts].Caddr));
}
#ifdef TWO_ZERO
@@ -1272,7 +1270,7 @@
hp = &p->RIOHosts[p->RIONumHosts];
hp->PaddrP = tint & PCI_BASE_ADDRESS_MEM_MASK;
- hp->Ivec = get_irq (pdev);
+ hp->Ivec = pdev->irq;
if (((1 << hp->Ivec) & rio_irqmask) == 0)
hp->Ivec = 0;
hp->Ivec |= 0x8000; /* Mark as non-sharable */
@@ -1307,8 +1305,7 @@
p->RIONumHosts++;
found++;
} else {
- my_iounmap (p->RIOHosts[p->RIONumHosts].PaddrP,
- p->RIOHosts[p->RIONumHosts].Caddr);
+ iounmap((char*) (p->RIOHosts[p->RIONumHosts].Caddr));
}
#else
printk (KERN_ERR "Found an older RIO PCI card, but the driver is not "
@@ -1361,7 +1358,7 @@
}
if (!okboard)
- my_iounmap (hp->PaddrP, hp->Caddr);
+ iounmap ((char*) (hp->Caddr));
}
}
reply other threads:[~2003-01-19 23:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030119233950.GD12601@fs.tum.de \
--to=bunk@fs.tum.de \
--cc=R.E.Wolff@bitwizard.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@bitwizard.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox