From: Jean Tourrilhes <jt@bougret.hpl.hp.com>
To: irda-users@lists.sourceforge.net,
Linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: Re: irport_net_open issue in 2.5.59
Date: Mon, 20 Jan 2003 10:30:03 -0800 [thread overview]
Message-ID: <20030120183003.GA7798@bougret.hpl.hp.com> (raw)
Alessandro Suardi wrote :
>
> [crossposted to IrDA-users and l-k]
Hum... This means that the IrDA mailing list archive is broken
again. Thanks SourceForge.
> The quest to set up properly (or give up where not possible) my new
> Dell Latitude C640 is moving forward... next target, IrDA. This
> laptop has a chip that is not detected by the 'findchip' tool but is
> detected by kernel code (SMC LPC47N252).
Ok.
> When irport is loaded (or perhaps when irattach is run), the module
> complains saying
>
> irport_net_open(), unable to allocate irq=0
>
> It does load, but as expected it doesn't seem to work - irdadump
> doesn't come up with any line at all.
Personally, I've never managed to make irport work, and I know
that in 2.5.X it's worse.
But, the message above indicate that you fed the driver with
improper module options. Try to set the proper irq, that would help.
Also, Daniele did lot's of work on the new SMC driver (smsc2,
available on my web page). Maybe you could test this one.
> Any hints ? Thanks in advance, ciao,
>
> --alessandro
Good luck...
Jean
next reply other threads:[~2003-01-20 18:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-20 18:30 Jean Tourrilhes [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-01-21 2:05 irport_net_open issue in 2.5.59 Alessandro Suardi
2003-01-20 12:49 Alessandro Suardi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030120183003.GA7798@bougret.hpl.hp.com \
--to=jt@bougret.hpl.hp.com \
--cc=irda-users@lists.sourceforge.net \
--cc=jt@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox