Re: Aic7xxx 6.2.28, boot warnings

David Fries
2003-02-09T22:19:42Z

[-- Attachment #1: Type: text/plain, Size: 20008 bytes --]

I bought an Adaptec 2940UW card about a month ago and I've had three
kernel panics spaced more than a week apart (2.4.19). After the 2nd
crash I hooked up a serial console and it registered the following
messages,

Kernel panic: HOST_MSG_LOOP with invalid SCB 2

In interrupt handler - not syncing

the only messages before those two were bootup and ppp messages.
After reading some older kernel list e-mails about write combining
(this is a old VIA chipset) I installed
aic79xx-linux-2.4-20030122-tar.gz into a fresh 2.4.21-pre4 tree
compiled and rebooted I haven't had any problems, I'll just have to
wait a couple weeks and see what happens. Now I'm getting some error
messages on bootup I didn't get previously and I would like to know if
I should ignore them or not. I have one IDE harddrive, one IDE cdrom,
one SCSI harddrive, and one SCSI cdrom.

Current boot messages
============================================================
Linux version 2.4.21-pre4 (root@SpacedOut) (gcc version 2.95.4 20011002 (Debian prerelease)) #27 Sat Feb 8 23:16:01 CST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff0800 (ACPI NVS)
BIOS-e820: 000000000fff0800 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=2.4.21 ro root=302 console=ttyS0,115200
Initializing CPU#0
Detected 300.689 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 599.65 BogoMIPS
Memory: 256760k/262080k available (1290k kernel code, 4936k reserved, 375k data, 220k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: AMD-K6(tm) 3D processor stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:07.3: class 604 doesn't match header type 00. Ignoring class.
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP LM15, ATA DISK drive
hda: DMA disabled
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 29336832 sectors (15020 MB) w/1900KiB Cache, CHS=29104/16/63
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
PCI: Assigned IRQ 10 for device 00:08.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS09U Rev: 0350
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:3:0): refuses WIDE negotiation. Using 8bit transfers
scsi0:0:3:0: Attempting to queue an ABORT message
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Data-in phase, at SEQADDR 0x7d
Card was paused
ACCUM = 0xf4, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x0
HCNT = 0xf4 SCBPTR = 0x0
SCSISIGI[0x44]:(BSYI|IOI) ERROR[0x0] SCSIBUSL[0x20]
LASTPHASE[0x40]:(IOI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x20]:(DPHASE) SSTAT0[0x0] SSTAT1[0x2]:(PHASECHG)
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x78]:(HDMAEN|SDMAEN|SCSIEN|WIDEODD)
DFSTATUS[0x40]:(DFCACHETH)
STACK: 0x0 0x16c 0x19c 0x6f
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x37] SCB_LUN[0x0]
SCB_TAG[0x2]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(LID) SCB_TAG[0xff]
Pending list:
2 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x37] SCB_LUN[0x0]
Kernel Free SCB list: 1 0
Untagged Q(3): 2
DevQ(0:0:0): 0 waiting
DevQ(0:3:0): 0 waiting

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:3:0: Device is active, asserting ATN
Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 0x2003
scsi0:0:3:0: Attempting to queue a TARGET RESET message
aic7xxx_dev_reset returns 0x2003
Recovery SCB completes
(scsi0:A:3): 8.333MB/s transfers (8.333MHz, offset 15)
Vendor: YAMAHA Model: CRW4416S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
sda: sda1 sda2
Linux video capture interface: v1.00
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed
INIT: version 2.84 booting
============================================================

previous 2.4.19 boot message
============================================================

Linux version 2.4.19 (root@SpacedOut) (gcc version 2.95.4 20011002 (Debian prerelease)) #24 Tue Oct 29 14:30:22 CST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff0800 (ACPI NVS)
BIOS-e820: 000000000fff0800 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=2.4.19 ro root=302 console=ttyS0
Initializing CPU#0
Detected 300.688 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 599.65 BogoMIPS
Memory: 257060k/262080k available (1106k kernel code, 4636k reserved, 274k data, 208k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: AMD-K6(tm) 3D processor stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:07.3: class 604 doesn't match header type 00. Ignoring class.
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: detected chipset, but driver not compiled in!
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
hda: QUANTUM FIREBALLP LM15, ATA DISK drive
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 29336832 sectors (15020 MB) w/1900KiB Cache, CHS=29104/16/63
Partition check:
hda: hda1 hda2
Linux video capture interface: v1.00
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: ide0(3,2): orphan cleanup on readonly fs
EXT3-fs: ide0(3,2): 25 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 208k freed
INIT: version 2.84 booting
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: IBM Model: DGHS09U Rev: 0350
Type: Direct-Access ANSI SCSI revision: 03
hub.c: USB new device connect on bus1/2, assigned device number 3
Manufacturer: Logitech
Product: USB Mouse
input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:3.0
(scsi0:A:3): 8.333MB/s transfers (8.333MHz, offset 15)
Vendor: YAMAHA Model: CRW4416S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
sg sd_mod Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
sda: sda1 sda2
isofs sr_mod Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ide-scsi scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
============================================================

SCSI AIC config options,
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC79XX is not set

/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3] (rev 4).
Master Capable. Latency=16.
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 65).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6).
Master Capable. Latency=64.
I/O at 0xe400 [0xe40f].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. USB (rev 2).
IRQ 9.
Master Capable. Latency=64.
I/O at 0xe000 [0xe01f].
Bus 0, device 7, function 3:
PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16).
IRQ 9.
Bus 0, device 8, function 0:
SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 0).
IRQ 10.
Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xea000000 [0xea000fff].
Bus 0, device 9, function 0:
Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 17).
IRQ 12.
Master Capable. Latency=64. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xea001000 [0xea001fff].
Bus 0, device 9, function 1:
Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 17).
IRQ 12.
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xea002000 [0xea002fff].
Bus 0, device 10, function 0:
Multimedia audio controller: Trident Microsystems 4DWave DX (rev 2).
IRQ 7.
Master Capable. Latency=64. Min Gnt=2.Max Lat=5.
I/O at 0xec00 [0xecff].
Non-prefetchable 32 bit memory at 0xea003000 [0xea003fff].
Bus 1, device 0, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 1).
IRQ 10.
Master Capable. Latency=64. Min Gnt=16.Max Lat=32.
Prefetchable 32 bit memory at 0xe8000000 [0xe8ffffff].
Non-prefetchable 32 bit memory at 0xe4000000 [0xe4003fff].
Non-prefetchable 32 bit memory at 0xe5000000 [0xe57fffff].

/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DGHS09U Rev: 0350
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW4416S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02

/proc/scsi/aic7xxx/0

Adaptec AIC7xxx driver version: 6.2.28
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

Serial EEPROM:
0xc178 0xc178 0xc178 0xc158 0xc178 0xc178 0xc178 0xc378
0xc178 0xc178 0xc178 0xc178 0xc178 0xc178 0xc178 0xc178
0x18a6 0x001b 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff
0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x5a2d

Channel A Target 0 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Channel A Target 0 Lun 0 Settings
Commands Queued 17048
Commands Active 0
Command Openings 64
Max Tagged Openings 253
Device Queue Frozen Count 0
Channel A Target 1 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 2 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 3 Negotiation Settings
User: 20.000MB/s transfers (20.000MHz, offset 255)
Goal: 8.333MB/s transfers (8.333MHz, offset 15)
Curr: 8.333MB/s transfers (8.333MHz, offset 15)
Channel A Target 3 Lun 0 Settings
Commands Queued 5
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
Channel A Target 4 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 5 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 6 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 7 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 8 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 9 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 10 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 11 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 12 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 13 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 14 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)
Channel A Target 15 Negotiation Settings
User: 40.000MB/s transfers (20.000MHz, offset 255, 16bit)

--
David Fries <dfries@mail.win.org>
http://fries.net/~david/pgpkey.txt

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]