From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 3 Feb 2003 08:46:30 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 3 Feb 2003 08:46:30 -0500 Received: from [195.20.32.236] ([195.20.32.236]:31927 "HELO euro.verza.com") by vger.kernel.org with SMTP id ; Mon, 3 Feb 2003 08:46:20 -0500 Date: Mon, 3 Feb 2003 13:53:52 +0100 From: Alexander Kellett To: saurabh khanna Cc: linux-kernel@vger.kernel.org Subject: Re: your mail Message-ID: <20030203125352.GA5925@groucho.verza.com> Mail-Followup-To: saurabh khanna , linux-kernel@vger.kernel.org References: <20030131184605.22113.qmail@webmail29.rediffmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20030131184605.22113.qmail@webmail29.rediffmail.com> User-Agent: Mutt/1.4i Disclaimer: My opinions do not necessarily represent those of my employer Copyright: Copyright 2003 Alexander Kellett - All Rights Reserved Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org hiya, unfortunately this list isn't for such problems and it would be better to contact your distribution or the various forums it has. try google. /me wonders again why this list isn't called linux-kernel-dev@... Alex On Fri, Jan 31, 2003 at 06:46:05PM -0000, saurabh khanna wrote: > Problem: My xwindows did not open and my sound card don't work. > > Xwindows: > I am a novice. I am using redhat linux 8. It detects my graphics > card > correctly but when i tried to open xwindows, my system hangs. > > Sound: > Linux has detected my sound card once but not configured it and > after > that nor it is working nither it is detected by my linux. > > GRUB: > Also, i can boot my linux through LILO only. GRUB wont work, it > gives > error "Not enough memory". > > I have re-installed linux on my computer but the problem > remains. > All other detailes are follows. > > Kernel version: > Linux version 2.4.18-14 (bhcompile@astest.test.redhat.com) > (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) > #1 Wed Sep 4 12:13:11 EDT 2002 > > > Commond which triggers the problem: > startx > > Processor information: > processor : 0 > > vendor_id : AuthenticAMD > > cpu family : 6 > > model : 6 > > model name : AMD Athlon(TM) XP 1700+ > > stepping : 2 > > cpu MHz : 1469.861 > > cache size : 256 KB > > fdiv_bug : no > > hlt_bug : no > > f00f_bug : no > > coma_bug : no > > fpu : yes > > fpu_exception : yes > > cpuid level : 1 > > wp : yes > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow > > bogomips : 2920.57 > > > > Module information: > nls_iso8859-1 3516 1 (autoclean) > > nls_cp437 5116 1 (autoclean) > > vfat 13084 1 (autoclean) > > fat 38744 0 (autoclean) > [vfat] > autofs 13348 0 (autoclean) (unused) > > ipt_REJECT 3736 2 (autoclean) > > iptable_filter 2412 1 (autoclean) > > ip_tables 14840 2 [ipt_REJECT iptable_filter] > > mousedev 5524 0 (unused) > > keybdev 2976 0 (unused) > > hid 22244 0 (unused) > > input 5888 0 [mousedev keybdev hid] > > usb-ohci 21288 0 (unused) > > usbcore 77056 1 [hid usb-ohci] > > ext3 70400 1 > > jbd 52212 1 [ext3] > > > > Loaded driver and hardware information: > 0000-001f : dma > 1 > 0020-003f : pic > 1 > 0040-005f : timer > > 0060-006f : keyboard > > 0070-007f : rtc > > 0080-008f : dma page reg > > 00a0-00bf : pic > 2 > 00c0-00df : dma > 2 > 00f0-00ff : fpu > > 01f0-01f7 : ide > 0 > 02f8-02ff : serial(auto) > > 03c0-03df : vga+ > > 03f6-03f6 : ide > 0 > 03f8-03ff : serial(auto) > > 0cf8-0cff : PCI conf > 1 > 5000-500f : PCI device 10de:01b4 (nVidia Corporation) > > 5100-511f : PCI device 10de:01b4 (nVidia Corporation) > > 5500-550f : PCI device 10de:01b4 (nVidia Corporation) > > a800-a80f : nVidia Corporation nForce IDE > > a800-a807 : ide0 > > a808-a80f : ide1 > > b000-bfff : PCI Bus #01 > > b800-b807 : Rockwell International HCF 56k Data/Fax/Voice/Spkp > (w/Handset) Modem > > d800-d807 : PCI device 10de:01c3 (nVidia Corporation) > > e000-e07f : PCI device 10de:01b1 (nVidia Corporation) > > e100-e1ff : PCI device 10de:01b1 (nVidia Corporation) > > 00000000-0007ffff : System RAM > > 0009fc00-0009ffff : reserved > > 000a0000-000bffff : Video RAM area > > 000c0000-000c7fff : Video ROM > > 000f0000-000fffff : System ROM > > 00100000-06febfff : System RAM > > 00100000-00247f2e : Kernel code > > 00247f2f-0033ed03 : Kernel data > > 06fec000-06feefff : ACPI Tables > > 06fef000-06ffefff : reserved > > 06fff000-06ffffff : ACPI Non-volatile Storage > > eb000000-ec7fffff : PCI Bus #02 > > eb000000-ebffffff : nVidia Corporation GeForce2 Integrated GPU > > ec800000-ecffffff : PCI Bus #01 > > ec800000-ec80ffff : Rockwell International HCF 56k > Data/Fax/Voice/Spkp (w/Handset) Modem > > ed000000-ed000fff : PCI device 10de:01b1 (nVidia Corporation) > > ed800000-ed87ffff : PCI device 10de:01b0 (nVidia Corporation) > > ee000000-ee0003ff : PCI device 10de:01c3 (nVidia Corporation) > > ee800000-ee800fff : PCI device 10de:01c2 (nVidia Corporation) > > ee800000-ee800fff : usb-ohci > e > f000000-ef000fff : PCI device > 10de:01c2 (nVidia Corporation) > > ef000000-ef000fff : usb-ohci > e > ff00000-f7ffffff : PCI Bus #02 > > f0000000-f7ffffff : nVidia Corporation GeForce2 Integrated GPU > > f8000000-fbffffff : PCI device > 10de:01a4 (nVidia Corporation) > > fec00000-fec00fff : reserved > > fee00000-fee00fff : reserved > > ffff0000-ffffffff : reserved > > > PCI information: > 00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev > b2) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [40] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1 > Capabilities: [60] #08 [2001] > > 00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory > Controller (rev b2) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory > Controller (rev b2) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:00.3 RAM memory: nVidia Corporation: Unknown device 01aa (rev > b2) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev > c3) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Capabilities: [50] #08 [01e1] > > 00:01.1 SMBus: nVidia Corporation nForce PCI System Management > (rev c1) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at 5000 [size=16] > Region 1: I/O ports at 5500 [size=16] > Region 2: I/O ports at 5100 [size=32] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.0 USB Controller: nVidia Corporation: Unknown device 01c2 > (rev c3) (prog-if 10 [OHCI]) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ef000000 (32-bit, non-prefetchable) > [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:03.0 USB Controller: nVidia Corporation: Unknown device 01c2 > (rev c3) (prog-if 10 [OHCI]) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ee800000 (32-bit, non-prefetchable) > [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.0 Ethernet controller: nVidia Corporation: Unknown device > 01c3 (rev c2) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ee000000 (32-bit, non-prefetchable) > [size=1K] > Region 1: I/O ports at d800 [size=8] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:05.0 Multimedia audio controller: nVidia Corporation: Unknown > device 01b0 (rev c2) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (250ns min, 3000ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ed800000 (32-bit, non-prefetchable) > [size=512K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:06.0 Multimedia audio controller: nVidia Corporation nForce > Audio (rev c2) > Subsystem: nVidia Corporation: Unknown device 8384 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (500ns min, 1250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at e100 [size=256] > Region 1: I/O ports at e000 [size=128] > Region 2: Memory at ed000000 (32-bit, non-prefetchable) > [disabled] [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge > (rev c2) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: ec800000-ecffffff > Prefetchable memory behind bridge: f8000000-f7ffffff > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > > 00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3) > (prog-if 8a [Master SecP PriP]) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Region 4: I/O ports at a800 [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge > (rev b2) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 > I/O behind bridge: 0000a000-00009fff > Memory behind bridge: eb000000-ec7fffff > Prefetchable memory behind bridge: eff00000-f7ffffff > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > > 01:08.0 Communication controller: Rockwell International HCF 56k > Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01) > Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp > (w/Handset) Modem > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 64 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ec800000 (32-bit, non-prefetchable) > [size=64K] > Region 1: I/O ports at b800 [size=8] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > > 02:00.0 VGA compatible controller: nVidia Corporation NV15 > [GeForce2 - nForce GPU] (rev b1) (prog-if 00 [VGA]) > Subsystem: nVidia Corporation: Unknown device 0c11 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at eb000000 (32-bit, non-prefetchable) > [size=16M] > Region 1: Memory at f0000000 (32-bit, prefetchable) > [size=128M] > Expansion ROM at efff0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x4 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate= > > > > XF86Config: > > # File generated by anaconda. > > Section "ServerLayout" > Identifier "Anaconda Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Mouse1" "SendCoreEvents" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > > # The location of the RGB database. Note, this is the name of > the > # file minus the extension (like ".txt" or ".db"). There is > normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (they are concatenated > together) > # By default, Red Hat 6.0 and later now use a font server > independent of > # the X server to render fonts. > > FontPath "unix/:7100" > > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "dri" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > > # Option "AutoRepeat" "500 5" > > # when using XQUEUE, comment out the above line, and uncomment > the > # following line > # Option "Protocol" "Xqueue" > > # Specify which keyboard LEDs can be user-controlled (eg, with > xset(1)) > # Option "Xleds" "1 2 3" > > # To disable the XKEYBOARD extension, uncomment XkbDisable. > # Option "XkbDisable" > > # To customise the XKB settings to suit your keyboard, modify > the > # lines below (which are the defaults). For example, for a > non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > #Option "XkbVariant" "" > #Option "XkbOptions" "" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "PS/2" > Option "Device" "/dev/psaux" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Device" "/dev/input/mice" > Option "Protocol" "IMPS/2" > Option "Emulate3Buttons" "no" > Option "ZAxisMapping" "4 5" > EndSection > > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > HorizSync 30-55 > VertRefresh 50-120 > Option "dpms" > > > EndSection > > Section "Device" > # no known options > Identifier "NVIDIA GeForce 2 MX (generic)" > Driver "nv" > VendorName "NVIDIA GeForce 2 MX (generic)" > BoardName "NVIDIA GeForce 2 MX (generic)" > > #BusID > EndSection > > Section "Screen" > Identifier "Screen0" > Device "NVIDIA GeForce 2 MX (generic)" > Monitor "Monitor0" > DefaultDepth 16 > > Subsection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > EndSubsection > > EndSection > > Section "DRI" > Mode 0666 > EndSection > > cmdline: > auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14 > root=LABEL=/ > > > dma: > 4: cascade > > > intrrupts: > CPU0 > 0: 337647 XT-PIC timer > 1: 2694 XT-PIC keyboard > 2: 0 XT-PIC cascade > 5: 0 XT-PIC usb-ohci, usb-ohci > 8: 1 XT-PIC rtc > 12: 20 XT-PIC PS/2 Mouse > 14: 27338 XT-PIC ide0 > NMI: 0 > ERR: 2 > > > partitions: > major minor #blocks name rio rmerge rsect ruse wio wmerge > wsect wuse running use aveq > > 3 0 39121488 hda 2567 4181 52107 22201 1417 1941 26952 > 45880 -2 329576 7788488 > 3 1 5245191 hda1 9 43 104 109 0 0 0 0 0 109 109 > 3 2 1 hda2 0 0 0 0 0 0 0 0 0 0 0 > 3 5 10490413 hda5 9 43 104 95 0 0 0 0 0 95 95 > 3 6 11695288 hda6 50 43 145 214 7 1 8 95 0 230 310 > 3 7 8104761 hda7 9 43 104 132 0 0 0 0 0 132 132 > 3 8 3277228 hda8 2475 3966 51498 21527 1410 1940 26944 > 45785 0 22394 67314 > 3 9 305203 hda9 9 25 104 56 0 0 0 0 0 56 56 > > > > My e-mail addresses are: linux_guyus@yahoo.com and > linux_guyus@rediff.com > My postel address: 80, Ahilya Nagar Ext. Annapurna Road, Indore, > M.P., > India. PIN 452009 > please answer me soon. > Thanking you. > Saurabh Khanna. > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > mvg, Alex -- "[...] Konqueror open source project. Weighing in at less than one tenth the size of another open source renderer" Apple, Jan 2003 (http://www.apple.com/safari/)