* Broadcom 10/100/1000 network cards and linux
@ 2003-02-12 19:37 Ognen Duzlevski
2003-02-14 23:13 ` Adrian Bunk
0 siblings, 1 reply; 3+ messages in thread
From: Ognen Duzlevski @ 2003-02-12 19:37 UTC (permalink / raw)
To: linux-kernel
Hi, there was some discussion here in the past on the bugginess of the
driver for the Broadcom 5702 Gb (10/100/1000) network cadrs (shipped
mostly with Compaq/HP boxes as standard item). Is this still an issue or
have the problems been resolved? Is this network card fully supported
under Linux 2.4.x and 2.5.x?
Thank you,
Ognen
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Broadcom 10/100/1000 network cards and linux
2003-02-12 19:37 Broadcom 10/100/1000 network cards and linux Ognen Duzlevski
@ 2003-02-14 23:13 ` Adrian Bunk
2003-02-14 23:17 ` Jeff Garzik
0 siblings, 1 reply; 3+ messages in thread
From: Adrian Bunk @ 2003-02-14 23:13 UTC (permalink / raw)
To: Ognen Duzlevski; +Cc: linux-kernel
On Wed, Feb 12, 2003 at 01:37:06PM -0600, Ognen Duzlevski wrote:
> Hi, there was some discussion here in the past on the bugginess of the
> driver for the Broadcom 5702 Gb (10/100/1000) network cadrs (shipped
> mostly with Compaq/HP boxes as standard item). Is this still an issue or
> have the problems been resolved? Is this network card fully supported
> under Linux 2.4.x and 2.5.x?
It should be supported with the tg3 driver included in 2.4.20.
This driver should work OK.
> Thank you,
> Ognen
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Broadcom 10/100/1000 network cards and linux
2003-02-14 23:13 ` Adrian Bunk
@ 2003-02-14 23:17 ` Jeff Garzik
0 siblings, 0 replies; 3+ messages in thread
From: Jeff Garzik @ 2003-02-14 23:17 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Ognen Duzlevski, linux-kernel
On Sat, Feb 15, 2003 at 12:13:05AM +0100, Adrian Bunk wrote:
> On Wed, Feb 12, 2003 at 01:37:06PM -0600, Ognen Duzlevski wrote:
>
> > Hi, there was some discussion here in the past on the bugginess of the
> > driver for the Broadcom 5702 Gb (10/100/1000) network cadrs (shipped
> > mostly with Compaq/HP boxes as standard item). Is this still an issue or
> > have the problems been resolved? Is this network card fully supported
> > under Linux 2.4.x and 2.5.x?
>
> It should be supported with the tg3 driver included in 2.4.20.
>
> This driver should work OK.
Unfortunately this driver is missing several workarounds for
hardware bugs :/ This affects all chips, bcm5700 - bcm5704.
One should grab tg3 from 2.4.21-pre4 patch... or the latest Marcelo
repository.
Jeff
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-02-14 23:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-02-12 19:37 Broadcom 10/100/1000 network cards and linux Ognen Duzlevski
2003-02-14 23:13 ` Adrian Bunk
2003-02-14 23:17 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox