--- dmesg.fullACPI 2003-03-06 09:45:41.000000000 -0500 +++ dmesg.noACPI 2003-03-06 10:47:01.000000000 -0500 @@ -13,22 +13,15 @@ DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 -ACPI: RSDP (v000 PTLTD ) @ 0x000f6ba0 -ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1fff5e36 -ACPI: FADT (v001 IBM TP-A20M 01540.00000) @ 0x1fffeb65 -ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1fffebd9 -ACPI: DSDT (v001 IBM TP A20m 01540.00000) @ 0x00000000 -ACPI: BIOS passes blacklist -ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 -Kernel command line: root=/dev/hda3 vga=791 +Kernel command line: root=/dev/hda3 vga=791 acpi=off Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) -Detected 696.848 MHz processor. +Detected 696.836 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1376.25 BogoMIPS Memory: 515028k/524224k available (2239k kernel code, 8452k reserved, 621k data, 148k init, 0k highmem) @@ -64,24 +57,11 @@ biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030228 - ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node dffe3c20), AE_AML_NO_RETURN_VALUE -ACPI: Interpreter enabled -ACPI: Using PIC for interrupt routing -ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) -ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) -ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11, disabled) -ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) -ACPI: PCI Root Bridge [PCI0] (00:00) -PCI: Probing PCI hardware (bus 00) -ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] -ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] -ACPI: Power Resource [PSER] (off) -ACPI: Power Resource [PSIO] (on) -ACPI: Embedded Controller [EC] (gpe 9) +ACPI: Disabled via command line (acpi=off) Linux Plug and Play Support v0.95 (c) Adam Belay PnPBIOS: Found PnP BIOS installation structure at 0xc00f6c50 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1d3, dseg 0x400 -PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver +PnPBIOS: 21 nodes reported by PnP BIOS; 21 recorded by driver block request queues: 128 requests per read queue 128 requests per write queue @@ -92,9 +72,12 @@ options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub -ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 -PCI: Using ACPI for IRQ routing -PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' +ACPI: ACPI tables contain no PCI IRQ routing entries +PCI: Invalid ACPI-PCI IRQ routing table +PCI: Probing PCI hardware +PCI: Probing PCI hardware (bus 00) +PCI: Discovered primary peer bus 08 [IRQ] +PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 @@ -106,18 +89,10 @@ Capability LSM initialized Initializing Cryptographic API Limiting direct PCI/PCI transfers. -ACPI: AC Adapter [AC] (on-line) -ACPI: Battery Slot [BAT0] (battery present) -ACPI: Battery Slot [BAT1] (battery absent) -ACPI: Power Button (FF) [PWRF] -ACPI: Lid Switch [LID] -ACPI: Sleep Button (CM) [SLPB] -ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) -ACPI: Thermal Zone [THM0] (65 C) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled devfs_register(tts/1): could not append to parent, err: -17 tts/1 at I/O 0x2f8 (irq = 3) is a 16550A -vesafb: framebuffer at 0xf5000000, mapped to 0xe081c000, size 8192k +vesafb: framebuffer at 0xf5000000, mapped to 0xe080d000, size 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:504c vesafb: scrolling: redraw @@ -153,11 +128,16 @@ hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Console: switching to colour frame buffer device 128x48 -Yenta IRQ list 00b8, PCI irq11 +PCI: Found IRQ 11 for device 00:02.0 +PCI: Sharing IRQ 11 with 00:05.0 +PCI: Sharing IRQ 11 with 01:00.0 +Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 -Yenta IRQ list 00b8, PCI irq11 +PCI: Found IRQ 11 for device 00:02.1 +Yenta IRQ list 06b8, PCI irq11 Socket status: 30000020 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 +PCI: Found IRQ 11 for device 00:07.2 uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 00:07.2: irq 11, io base 00001820 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. @@ -172,6 +152,9 @@ input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC). +PCI: Found IRQ 11 for device 00:05.0 +PCI: Sharing IRQ 11 with 00:02.0 +PCI: Sharing IRQ 11 with 01:00.0 cs46xx: failure waiting for FIFO command to complete hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ALSA device list: @@ -180,7 +163,6 @@ IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -ACPI: (supports S0 S1 S3 S4 S5) hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-00:07.2-1 cs: cb_alloc(bus 6): vendor 0x115d, device 0x0003