public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* cardbus driver
@ 2003-03-07 13:38 SANTHOSH K
  2003-03-07 14:31 ` Russell King
  0 siblings, 1 reply; 3+ messages in thread
From: SANTHOSH K @ 2003-03-07 13:38 UTC (permalink / raw)
  To: 'linux-kernel@vger.kernel.org'

Hi all,

What change need to be done to give support for a pccard driver to a cardbus
driver?

Thanks in advance

Santhosh K

^ permalink raw reply	[flat|nested] 3+ messages in thread
* RE: cardbus driver
@ 2003-03-07 14:17 SANTHOSH K
  0 siblings, 0 replies; 3+ messages in thread
From: SANTHOSH K @ 2003-03-07 14:17 UTC (permalink / raw)
  To: 'rmk@arm.linux.org.uk'; +Cc: 'linux-kernel@vger.kernel.org'


I have a board with cardbus support. And a WLAN card driver with pci
support. So i could not use this WLAN card in this board. So I need to
support Cardbus in the wlan driver.

-----Original Message-----
From: Russell King [mailto:rmk@arm.linux.org.uk]
Sent: Friday, March 07, 2003 8:01 PM
To: SANTHOSH K
Cc: 'linux-kernel@vger.kernel.org'
Subject: Re: cardbus driver


On Fri, Mar 07, 2003 at 07:08:29PM +0530, SANTHOSH K wrote:
> What change need to be done to give support for a pccard driver to a
cardbus
> driver?

Electrically, they're different interfaces.  If the controller hardware
you're using doesn't support cardbus cards, no amount of software will
make them work.

Could you give some details about the hardware and the driver?

-- 
Russell King (rmk@arm.linux.org.uk)                The developer of ARM
Linux
             http://www.arm.linux.org.uk/personal/aboutme.html

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2003-03-07 14:25 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-03-07 13:38 cardbus driver SANTHOSH K
2003-03-07 14:31 ` Russell King
  -- strict thread matches above, loose matches on Subject: below --
2003-03-07 14:17 SANTHOSH K

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox