* Re: PCI init issues
@ 2003-03-04 16:26 david.knierim
2003-03-04 16:41 ` Linus Torvalds
2003-03-04 17:54 ` Ron Arts
0 siblings, 2 replies; 16+ messages in thread
From: david.knierim @ 2003-03-04 16:26 UTC (permalink / raw)
To: Ivan Kokshaysky
Cc: alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet,
linux-kernel, raarts, Robert Olsson, Linus Torvalds
[-- Attachment #1: Type: text/plain, Size: 1898 bytes --]
Ivan,
Here is the full messages output for a system with this problem. I had
only provided part of the
messages file to him earlier. This is the entire output.
(See attached file: messages)
David
Ivan Kokshaysky
<ink@jurassic.pa To: jamal
<hadi@cyberus.ca>
rk.msu.ru> cc: Greg KH
<greg@kroah.com>, Linus Torvalds
<torvalds@transmeta.com>, Jeff Garzik
<jgarzik@pobox.com>,
kuznet@ms2.inr.ac.ru, david.knierim@tekelec.com,
Robert Olsson
03/04/2003 10:28 <Robert.Olsson@data.slu.se>,
Donald Becker <becker@scyld.com>,
AM
linux-kernel@vger.kernel.org, alexander@netintact.se,
raarts@office.netland.nl
Subject: Re: PCI init issues
On Mon, Mar 03, 2003 at 08:48:16PM -0500, jamal wrote:
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I4,P0) ->
> 96
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I5,P1) ->
> 96
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I6,P2) ->
> 96
> Mar 3 18:01:39 localhost kernel: PCI->APIC IRQ transform: (B6,I7,P3) ->
> 96
...
> BIOS irq assignments i suppose are validated.
No, this means that mp tables are broken in a way I didn't expect...
Also, it's unclear whether or not the IOxAPIC routing is broken as well.
Probably full dmesg output (especially things related to IO_APICs setup
and irq<->pin mapping) could shed some light on this.
> I have a feeling the reason it works in windows is because of a
> functional ACPI.
Perhaps.
Ivan.
(See attached file: messages)
[-- Attachment #2: messages --]
[-- Type: application/octet-stream, Size: 48018 bytes --]
Mar 4 11:25:26 localhost exiting on signal 15
Mar 4 11:27:44 localhost syslogd 1.4.1: restart.
Mar 4 11:27:44 localhost syslog: syslogd startup succeeded
Mar 4 11:27:44 localhost syslog: klogd startup succeeded
Mar 4 11:27:44 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 4 11:27:44 localhost kernel: redirection entries: 0017
Mar 4 11:27:44 localhost kernel:
Mar 4 11:27:44 localhost last message repeated 3 times
Mar 4 11:27:44 localhost kernel: .................................... done.
Mar 4 11:27:44 localhost kernel: Using local APIC timer interrupts.
Mar 4 11:27:44 localhost kernel: calibrating APIC timer ...
Mar 4 11:27:44 localhost kernel: ..... CPU clock speed is 1996.0664 MHz.
Mar 4 11:27:44 localhost kernel: ..... host bus clock speed is 99.1595 MHz.
Mar 4 11:27:44 localhost kernel: cpu: 0, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: CPU0<T0:194928,T1:155936,D:4,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: cpu: 1, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: cpu: 3, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: cpu: 2, clocks: 194942, slice: 38988
Mar 4 11:27:44 localhost kernel: CPU2<T0:194928,T1:77952,D:12,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: CPU3<T0:194928,T1:38976,D:0,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: CPU1<T0:194928,T1:116944,D:8,S:38988,C:194942>
Mar 4 11:27:44 localhost kernel: checking TSC synchronization across CPUs: passed.
Mar 4 11:27:44 localhost kernel: migration_task 0 on cpu=0
Mar 4 11:27:44 localhost kernel: migration_task 2 on cpu=2
Mar 4 11:27:44 localhost kernel: migration_task 3 on cpu=3
Mar 4 11:27:44 localhost kernel: migration_task 1 on cpu=1
Mar 4 11:27:44 localhost kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Mar 4 11:27:44 localhost kernel: mtrr: probably your BIOS does not setup all CPUs
Mar 4 11:27:44 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=8
Mar 4 11:27:44 localhost kernel: PCI: Using configuration type 1
Mar 4 11:27:44 localhost kernel: PCI: Probing PCI hardware
Mar 4 11:27:44 localhost kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
Mar 4 11:27:44 localhost kernel: PCI: Discovered primary peer bus 10 [IRQ]
Mar 4 11:27:44 localhost kernel: PCI: Discovered primary peer bus 11 [IRQ]
Mar 4 11:27:44 localhost kernel: PCI: Discovered primary peer bus 12 [IRQ]
Mar 4 11:27:44 localhost kernel: PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0
Mar 4 11:27:44 localhost kernel: PCI: IRQ fixup
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B2,I1,P1) -> 48
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B3,I1,P1) -> 24
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B3,I1,P2) -> 25
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I4,P0) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I5,P1) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I6,P2) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B6,I7,P3) -> 96
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B8,I1,P1) -> 16
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B8,I2,P2) -> 17
Mar 4 11:27:44 localhost kernel: PCI->APIC IRQ transform: (B8,I3,P3) -> 18
Mar 4 11:27:44 localhost kernel: isapnp: Scanning for PnP cards...
Mar 4 11:27:44 localhost kernel: isapnp: No Plug & Play device found
Mar 4 11:27:44 localhost kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Mar 4 11:27:44 localhost kernel: Linux NET4.0 for Linux 2.4
Mar 4 11:27:44 localhost kernel: Based upon Swansea University Computer Society NET3.039
Mar 4 11:27:44 localhost kernel: Initializing RT netlink socket
Mar 4 11:27:44 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Mar 4 11:27:44 localhost kernel: apm: disabled - APM is not SMP safe.
Mar 4 11:27:44 localhost kernel: Starting kswapd
Mar 4 11:27:44 localhost kernel: allocated 256 pages and 256 bhs reserved for the highmem bounces
Mar 4 11:27:44 localhost kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Mar 4 11:27:44 localhost kernel: Detected PS/2 Mouse Port.
Mar 4 11:27:44 localhost kernel: pty: 2048 Unix98 ptys configured
Mar 4 11:27:44 localhost kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 4 11:27:44 localhost kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Mar 4 11:27:44 localhost kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mar 4 11:27:44 localhost kernel: Real Time Clock Driver v1.10e
Mar 4 11:27:44 localhost kernel: block: 1024 slots per queue, batch=256
Mar 4 11:27:44 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Mar 4 11:27:44 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 4 11:27:44 localhost kernel: PIIX4: IDE controller on PCI bus 00 dev f9
Mar 4 11:27:44 localhost kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
Mar 4 11:27:44 localhost kernel: PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table.
Mar 4 11:27:44 localhost kernel: PIIX4: chipset revision 2
Mar 4 11:27:44 localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
Mar 4 11:27:44 localhost kernel: ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio
Mar 4 11:27:44 localhost kernel: ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio
Mar 4 11:27:44 localhost kernel: hda: WDC WD1200BB-00CAA1, ATA DISK drive
Mar 4 11:27:44 localhost kernel: hdc: WDC WD1200BB-00CAA1, ATA DISK drive
Mar 4 11:27:44 localhost kernel: hdd: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
Mar 4 11:27:44 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 4 11:27:44 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 4 11:27:44 localhost kernel: blk: queue c041fda4, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: blk: queue c041fda4, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
Mar 4 11:27:44 localhost kernel: blk: queue c0420104, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: blk: queue c0420104, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
Mar 4 11:27:44 localhost kernel: ide-floppy driver 0.99.newide
Mar 4 11:27:44 localhost kernel: Partition check:
Mar 4 11:27:44 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
Mar 4 11:27:44 localhost kernel: hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 >
Mar 4 11:27:44 localhost kernel: FDC 0 is a post-1991 82077
Mar 4 11:27:44 localhost kernel: NET4: Frame Diverter 0.46
Mar 4 11:27:44 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Mar 4 11:27:44 localhost kernel: ide-floppy driver 0.99.newide
Mar 4 11:27:44 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 4 11:27:44 localhost kernel: md: Autodetecting RAID arrays.
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 7 times
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.1): succeeded
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 6 times
Mar 4 11:27:44 localhost kernel: md: autorun ...
Mar 4 11:27:44 localhost kernel: md: considering hdc11 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc11 ...
Mar 4 11:27:44 localhost kernel: md: adding hda11 ...
Mar 4 11:27:44 localhost kernel: md: created md11
Mar 4 11:27:44 localhost kernel: md: bind<hda11,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc11,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc11><hda11>
Mar 4 11:27:44 localhost kernel: md: hdc11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md11 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc11,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc11)
Mar 4 11:27:44 localhost kernel: md: unbind<hda11,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda11)
Mar 4 11:27:44 localhost kernel: md: considering hdc10 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc10 ...
Mar 4 11:27:44 localhost kernel: md: adding hda10 ...
Mar 4 11:27:44 localhost kernel: md: created md10
Mar 4 11:27:44 localhost kernel: md: bind<hda10,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc10,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc10><hda10>
Mar 4 11:27:44 localhost kernel: md: hdc10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md10 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc10,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc10)
Mar 4 11:27:44 localhost kernel: md: unbind<hda10,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda10)
Mar 4 11:27:44 localhost kernel: md: considering hdc9 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc9 ...
Mar 4 11:27:44 localhost kernel: md: adding hda9 ...
Mar 4 11:27:44 localhost kernel: md: created md9
Mar 4 11:27:44 localhost kernel: md: bind<hda9,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc9,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc9><hda9>
Mar 4 11:27:44 localhost kernel: md: hdc9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.2): succeeded
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md9 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc9,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc9)
Mar 4 11:27:44 localhost kernel: md: unbind<hda9,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda9)
Mar 4 11:27:44 localhost kernel: md: considering hdc8 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc8 ...
Mar 4 11:27:44 localhost kernel: md: adding hda8 ...
Mar 4 11:27:44 localhost kernel: md: created md8
Mar 4 11:27:44 localhost kernel: md: bind<hda8,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc8,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc8><hda8>
Mar 4 11:27:44 localhost kernel: md: hdc8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md8 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc8,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc8)
Mar 4 11:27:44 localhost kernel: md: unbind<hda8,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda8)
Mar 4 11:27:44 localhost kernel: md: considering hdc7 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc7 ...
Mar 4 11:27:44 localhost kernel: md: adding hda7 ...
Mar 4 11:27:44 localhost kernel: md: created md7
Mar 4 11:27:44 localhost kernel: md: bind<hda7,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc7,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc7><hda7>
Mar 4 11:27:44 localhost kernel: md: hdc7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md7 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc7,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc7)
Mar 4 11:27:44 localhost kernel: md: unbind<hda7,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda7)
Mar 4 11:27:44 localhost kernel: md: considering hdc6 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc6 ...
Mar 4 11:27:44 localhost kernel: md: adding hda6 ...
Mar 4 11:27:44 localhost kernel: md: created md6
Mar 4 11:27:44 localhost kernel: md: bind<hda6,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc6,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc6><hda6>
Mar 4 11:27:44 localhost kernel: md: hdc6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md6 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc6,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc6)
Mar 4 11:27:44 localhost kernel: md: unbind<hda6,0>
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.3): succeeded
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda6)
Mar 4 11:27:44 localhost kernel: md: considering hdc5 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc5 ...
Mar 4 11:27:44 localhost kernel: md: adding hda5 ...
Mar 4 11:27:44 localhost kernel: md: created md5
Mar 4 11:27:44 localhost kernel: md: bind<hda5,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc5,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc5><hda5>
Mar 4 11:27:44 localhost kernel: md: hdc5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md5 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc5,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc5)
Mar 4 11:27:44 localhost kernel: md: unbind<hda5,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda5)
Mar 4 11:27:44 localhost kernel: md: considering hdc3 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc3 ...
Mar 4 11:27:44 localhost kernel: md: adding hda3 ...
Mar 4 11:27:44 localhost kernel: md: created md3
Mar 4 11:27:44 localhost kernel: md: bind<hda3,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc3,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc3><hda3>
Mar 4 11:27:44 localhost kernel: md: hdc3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: hda3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md3 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc3,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc3)
Mar 4 11:27:44 localhost kernel: md: unbind<hda3,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda3)
Mar 4 11:27:44 localhost kernel: md: considering hdc2 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc2 ...
Mar 4 11:27:44 localhost kernel: md: adding hda2 ...
Mar 4 11:27:44 localhost kernel: md: created md2
Mar 4 11:27:44 localhost kernel: md: bind<hda2,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc2,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc2><hda2>
Mar 4 11:27:44 localhost kernel: md: hdc2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md2 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc2,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc2)
Mar 4 11:27:44 localhost kernel: md: unbind<hda2,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda2)
Mar 4 11:27:44 localhost kernel: md: considering hdc1 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc1 ...
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.4): succeeded
Mar 4 11:27:44 localhost kernel: md: adding hda1 ...
Mar 4 11:27:44 localhost kernel: md: created md1
Mar 4 11:27:44 localhost kernel: md: bind<hda1,1>
Mar 4 11:27:44 localhost kernel: md: bind<hdc1,2>
Mar 4 11:27:44 localhost kernel: md: running: <hdc1><hda1>
Mar 4 11:27:44 localhost kernel: md: hdc1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hda1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
Mar 4 11:27:44 localhost kernel: md: personality 3 is not loaded!
Mar 4 11:27:44 localhost kernel: md :do_md_run() returned -22
Mar 4 11:27:44 localhost kernel: md: md1 stopped.
Mar 4 11:27:44 localhost kernel: md: unbind<hdc1,1>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hdc1)
Mar 4 11:27:44 localhost kernel: md: unbind<hda1,0>
Mar 4 11:27:44 localhost kernel: md: export_rdev(hda1)
Mar 4 11:27:44 localhost kernel: md: ... autorun DONE.
Mar 4 11:27:44 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Mar 4 11:27:44 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 4 11:27:44 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 4 11:27:44 localhost kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes
Mar 4 11:27:44 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536)
Mar 4 11:27:44 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 4 11:27:44 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 4 11:27:44 localhost kernel: RAMDISK: Compressed image found at block 0
Mar 4 11:27:44 localhost kernel: Freeing initrd memory: 133k freed
Mar 4 11:27:44 localhost kernel: VFS: Mounted root (ext2 filesystem).
Mar 4 11:27:44 localhost kernel: md: raid1 personality registered as nr 3
Mar 4 11:27:44 localhost kernel: Journalled Block Device driver loaded
Mar 4 11:27:44 localhost kernel: md: Autodetecting RAID arrays.
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 13 times
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000026]
Mar 4 11:27:44 localhost kernel: [events: 00000028]
Mar 4 11:27:44 localhost last message repeated 3 times
Mar 4 11:27:44 localhost kernel: md: autorun ...
Mar 4 11:27:44 localhost kernel: md: considering hda1 ...
Mar 4 11:27:44 localhost kernel: md: adding hda1 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc1 ...
Mar 4 11:27:44 localhost kernel: md: created md1
Mar 4 11:27:44 localhost kernel: md: bind<hdc1,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda1,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda1><hdc1>
Mar 4 11:27:44 localhost kernel: md: hda1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc1's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md1: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md1: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda1 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc1 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.5): succeeded
Mar 4 11:27:44 localhost kernel: md: updating md1 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda1 [events: 00000029]<6>(write) hda1's sb offset: 272960
Mar 4 11:27:44 localhost kernel: md: hdc1 [events: 00000029]<6>(write) hdc1's sb offset: 262976
Mar 4 11:27:44 localhost kernel: md: considering hda2 ...
Mar 4 11:27:44 localhost kernel: md: adding hda2 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc2 ...
Mar 4 11:27:44 localhost kernel: md: created md2
Mar 4 11:27:44 localhost kernel: md: bind<hdc2,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda2,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda2><hdc2>
Mar 4 11:27:44 localhost kernel: md: hda2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc2's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md2: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md2: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda2 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc2 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md2 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda2 [events: 00000029]<6>(write) hda2's sb offset: 538112
Mar 4 11:27:44 localhost kernel: md: hdc2 [events: 00000029]<6>(write) hdc2's sb offset: 525056
Mar 4 11:27:44 localhost kernel: md: considering hda3 ...
Mar 4 11:27:44 localhost kernel: md: adding hda3 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc3 ...
Mar 4 11:27:44 localhost kernel: md: created md3
Mar 4 11:27:44 localhost kernel: md: bind<hdc3,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda3,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda3><hdc3>
Mar 4 11:27:44 localhost kernel: md: hda3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: hdc3's event counter: 00000026
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md3: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md3: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda3 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc3 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md3 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md3 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda3 [events: 00000027]<6>(write) hda3's sb offset: 2056256
Mar 4 11:27:44 localhost kernel: md: hdc3 [events: 00000027]<6>(write) hdc3's sb offset: 2048640
Mar 4 11:27:44 localhost kernel: md: considering hda5 ...
Mar 4 11:27:44 localhost kernel: md: adding hda5 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc5 ...
Mar 4 11:27:44 localhost kernel: md: created md5
Mar 4 11:27:44 localhost kernel: md: bind<hdc5,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda5,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda5><hdc5>
Mar 4 11:27:44 localhost kernel: md: hda5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc5's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md5: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md5: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda5 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc5 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md5 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md5 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda5 [events: 00000029]<6>(write) hda5's sb offset: 4208896
Mar 4 11:27:44 localhost kernel: md: hdc5 [events: 00000029]<6>(write) hdc5's sb offset: 4195200
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.6): succeeded
Mar 4 11:27:44 localhost kernel: md: considering hda6 ...
Mar 4 11:27:44 localhost kernel: md: adding hda6 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc6 ...
Mar 4 11:27:44 localhost kernel: md: created md6
Mar 4 11:27:44 localhost kernel: md: bind<hdc6,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda6,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda6><hdc6>
Mar 4 11:27:44 localhost kernel: md: hda6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc6's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md6: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md6: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda6 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc6 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md6 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md6 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda6 [events: 00000029]<6>(write) hda6's sb offset: 1060160
Mar 4 11:27:44 localhost kernel: md: hdc6 [events: 00000029]<6>(write) hdc6's sb offset: 1049216
Mar 4 11:27:44 localhost kernel: md: considering hda7 ...
Mar 4 11:27:44 localhost kernel: md: adding hda7 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc7 ...
Mar 4 11:27:44 localhost kernel: md: created md7
Mar 4 11:27:44 localhost kernel: md: bind<hdc7,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda7,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda7><hdc7>
Mar 4 11:27:44 localhost kernel: md: hda7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc7's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md7: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md7: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda7 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc7 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md7 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md7 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda7 [events: 00000029]<6>(write) hda7's sb offset: 538048
Mar 4 11:27:44 localhost kernel: md: hdc7 [events: 00000029]<6>(write) hdc7's sb offset: 525056
Mar 4 11:27:44 localhost kernel: md: considering hda8 ...
Mar 4 11:27:44 localhost kernel: md: adding hda8 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc8 ...
Mar 4 11:27:44 localhost kernel: md: created md8
Mar 4 11:27:44 localhost kernel: md: bind<hdc8,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda8,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda8><hdc8>
Mar 4 11:27:44 localhost kernel: md: hda8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc8's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md8: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md8: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost swapcheck: Activating swapfile (/var/TKLC/swap/swap.7): succeeded
Mar 4 11:27:44 localhost kernel: raid1: device hda8 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc8 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md8 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md8 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda8 [events: 00000029]<6>(write) hda8's sb offset: 4208896
Mar 4 11:27:44 localhost kernel: md: hdc8 [events: 00000029]<6>(write) hdc8's sb offset: 4195200
Mar 4 11:27:44 localhost kernel: md: considering hda9 ...
Mar 4 11:27:44 localhost kernel: md: adding hda9 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc9 ...
Mar 4 11:27:44 localhost kernel: md: created md9
Mar 4 11:27:44 localhost kernel: md: bind<hdc9,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda9,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda9><hdc9>
Mar 4 11:27:44 localhost kernel: md: hda9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc9's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md9: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md9: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda9 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc9 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md9 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md9 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda9 [events: 00000029]<6>(write) hda9's sb offset: 538048
Mar 4 11:27:44 localhost kernel: md: hdc9 [events: 00000029]<6>(write) hdc9's sb offset: 525056
Mar 4 11:27:44 localhost kernel: md: considering hda10 ...
Mar 4 11:27:44 localhost kernel: md: adding hda10 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc10 ...
Mar 4 11:27:44 localhost kernel: md: created md10
Mar 4 11:27:44 localhost kernel: md: bind<hdc10,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda10,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda10><hdc10>
Mar 4 11:27:44 localhost kernel: md: hda10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc10's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md10: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md10: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda10 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc10 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md10 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md10 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda10 [events: 00000029]<6>(write) hda10's sb offset: 4208896
Mar 4 11:27:44 localhost kernel: md: hdc10 [events: 00000029]<6>(write) hdc10's sb offset: 4195200
Mar 4 11:27:44 localhost kernel: md: considering hda11 ...
Mar 4 11:27:44 localhost kernel: md: adding hda11 ...
Mar 4 11:27:44 localhost kernel: md: adding hdc11 ...
Mar 4 11:27:44 localhost kernel: md: created md11
Mar 4 11:27:44 localhost kernel: md: bind<hdc11,1>
Mar 4 11:27:44 localhost kernel: md: bind<hda11,2>
Mar 4 11:27:44 localhost kernel: md: running: <hda11><hdc11>
Mar 4 11:27:44 localhost kernel: md: hda11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: hdc11's event counter: 00000028
Mar 4 11:27:44 localhost kernel: md: RAID level 1 does not need chunksize! Continuing anyway.
Mar 4 11:27:44 localhost kernel: md11: max total readahead window set to 508k
Mar 4 11:27:44 localhost kernel: md11: 1 data-disks, max readahead per data-disk: 508k
Mar 4 11:27:44 localhost kernel: raid1: device hda11 operational as mirror 0
Mar 4 11:27:44 localhost kernel: raid1: device hdc11 operational as mirror 1
Mar 4 11:27:44 localhost kernel: raid1: raid set md11 active with 2 out of 2 mirrors
Mar 4 11:27:44 localhost kernel: md: updating md11 RAID superblock on device
Mar 4 11:27:44 localhost kernel: md: hda11 [events: 00000029]<6>(write) hda11's sb offset: 15880128
Mar 4 11:27:44 localhost kernel: md: hdc11 [events: 00000029]<6>(write) hdc11's sb offset: 15872832
Mar 4 11:27:44 localhost kernel: md: ... autorun DONE.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: Freeing unused kernel memory: 188k freed
Mar 4 11:27:44 localhost kernel: Adding Swap: 2048632k swap-space (priority 1000)
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,2), internal journal
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,1), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,6), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,5), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,7), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,8), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,9), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,10), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: kjournald starting. Commit interval 5 seconds
Mar 4 11:27:44 localhost kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on md(9,11), internal journal
Mar 4 11:27:44 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 4 11:27:44 localhost kernel: SCSI subsystem driver Revision: 1.00
Mar 4 11:27:44 localhost kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 4 11:27:44 localhost kernel: Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS1
Mar 4 11:27:44 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Mar 4 11:27:44 localhost kernel: hdd: DMA disabled
Mar 4 11:27:44 localhost kernel: blk: queue c041fda4, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost kernel: blk: queue c0420104, I/O limit 4095Mb (mask 0xffffffff)
Mar 4 11:27:44 localhost keytable: Loading system font: succeeded
Mar 4 11:27:44 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Mar 4 11:27:44 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Mar 4 11:27:44 localhost kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:FC:80, IRQ 17.
Mar 4 11:27:45 localhost kernel: Board assembly 000000-000, Physical connectors present: RJ45
Mar 4 11:27:45 localhost kernel: Primary interface chip i82555 PHY #1.
Mar 4 11:27:45 localhost kernel: General self-test: passed.
Mar 4 11:27:45 localhost kernel: Serial sub-system self-test: passed.
Mar 4 11:27:45 localhost kernel: Internal registers self-test: passed.
Mar 4 11:27:45 localhost kernel: ROM checksum self-test: passed (0xb874c1d3).
Mar 4 11:27:45 localhost kernel: eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:FC:81, IRQ 18.
Mar 4 11:27:45 localhost kernel: Board assembly 000000-000, Physical connectors present: RJ45
Mar 4 11:27:45 localhost kernel: Primary interface chip i82555 PHY #1.
Mar 4 11:27:45 localhost kernel: General self-test: passed.
Mar 4 11:27:45 localhost kernel: Serial sub-system self-test: passed.
Mar 4 11:27:45 localhost kernel: Internal registers self-test: passed.
Mar 4 11:27:45 localhost kernel: ROM checksum self-test: passed (0xb874c1d3).
Mar 4 11:27:45 localhost kernel: Intel(R) PRO/1000 Network Driver - version 4.4.19-k2
Mar 4 11:27:45 localhost kernel: Copyright (c) 1999-2002 Intel Corporation.
Mar 4 11:27:45 localhost kernel: eth2: Intel(R) PRO/1000 Network Connection
Mar 4 11:27:45 localhost kernel: eth3: Intel(R) PRO/1000 Network Connection
Mar 4 11:27:45 localhost kernel: eth4: Intel(R) PRO/1000 Network Connection
Mar 4 11:27:45 localhost kernel: e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex
Mar 4 11:27:45 localhost kernel: e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex
Mar 4 11:27:45 localhost kernel: e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex
Mar 4 11:27:45 localhost kernel: Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
Mar 4 11:27:45 localhost kernel: tulip0: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth5: Digital DS21143 Tulip rev 65 at 0xf89f9000, 00:C0:95:C8:0E:80, IRQ 96.
Mar 4 11:27:45 localhost kernel: tulip1: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth6: Digital DS21143 Tulip rev 65 at 0xf89fb400, 00:C0:95:C8:0E:81, IRQ 96.
Mar 4 11:27:45 localhost kernel: tulip2: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip2: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip2: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip2: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip2: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth7: Digital DS21143 Tulip rev 65 at 0xf89fd800, 00:C0:95:C8:0E:82, IRQ 96.
Mar 4 11:27:45 localhost kernel: tulip3: EEPROM default media type Autosense.
Mar 4 11:27:45 localhost kernel: tulip3: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip3: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
Mar 4 11:27:45 localhost kernel: tulip3: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: tulip3: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
Mar 4 11:27:45 localhost kernel: eth8: Digital DS21143 Tulip rev 65 at 0xf89ffc00, 00:C0:95:C8:0E:83, IRQ 96.
Mar 4 11:27:45 localhost random: Initializing random number generator: succeeded
Mar 4 11:27:45 localhost netfs: Mounting other filesystems: succeeded
Mar 4 11:27:45 localhost autofs: automount startup succeeded
Mar 4 11:27:45 localhost sshd: Starting sshd:
Mar 4 11:27:45 localhost sshd: succeeded
Mar 4 11:27:45 localhost sshd: [
Mar 4 11:27:45 localhost sshd:
Mar 4 11:27:45 localhost rc: Starting sshd: succeeded
Mar 4 11:27:46 localhost crond: crond startup succeeded
Mar 4 11:27:46 localhost syscheck: Starting syscheck:
Mar 4 11:27:09 localhost rc.sysinit: Mounting proc filesystem: succeeded
Mar 4 11:27:09 localhost rc.sysinit: Unmounting initrd: succeeded
Mar 4 11:27:09 localhost sysctl: net.ipv4.ip_forward = 0
Mar 4 11:27:09 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 4 11:27:09 localhost sysctl: kernel.sysrq = 0
Mar 4 11:27:09 localhost sysctl: kernel.core_uses_pid = 1
Mar 4 11:27:09 localhost rc.sysinit: Configuring kernel parameters: succeeded
Mar 4 11:27:09 localhost date: Tue Mar 4 11:27:09 EST 2003
Mar 4 11:27:09 localhost rc.sysinit: Setting clock (localtime): Tue Mar 4 11:27:09 EST 2003 succeeded
Mar 4 11:27:09 localhost rc.sysinit: Activating swap partitions: succeeded
Mar 4 11:27:09 localhost rc.sysinit: Setting hostname localhost.localdomain: succeeded
Mar 4 11:27:09 localhost fsck: /: clean, 19675/131560 files, 144942/525056 blocks
Mar 4 11:27:09 localhost fsck: [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/md2
Mar 4 11:27:09 localhost rc.sysinit: Checking root filesystem succeeded
Mar 4 11:27:09 localhost rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Mar 4 11:27:15 localhost rc.sysinit: Finding module dependencies: succeeded
Mar 4 11:27:15 localhost fsck: /boot: clean, 44/66000 files, 29937/262976 blocks
Mar 4 11:27:16 localhost fsck: /tmp: clean, 13/131328 files, 12339/262144 blocks
Mar 4 11:27:16 localhost fsck: /usr: clean, 80488/525312 files, 372902/1048576 blocks
Mar 4 11:27:16 localhost fsck: /var: clean, 783/131560 files, 62986/525056 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC: clean, 44/525312 files, 25880/1048576 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC/recove: clean, 12/131560 files, 24852/525056 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC/recov1: clean, 11/525312 files, 24703/1048576 blocks
Mar 4 11:27:16 localhost fsck: /var/TKLC/swap: clean, 18/1987136 files, 3744162/3968208 blocks
Mar 4 11:27:16 localhost fsck: Checking all file systems.
Mar 4 11:27:16 localhost rc.sysinit: Checking filesystems succeeded
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/md1
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /tmp] fsck.ext3 -a /dev/md6
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a /dev/md5
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a /dev/md7
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC] fsck.ext3 -a /dev/md8
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC/recovery] fsck.ext3 -a /dev/md9
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC/recovery/usr] fsck.ext3 -a /dev/md10
Mar 4 11:27:16 localhost fsck: [/sbin/fsck.ext3 (1) -- /var/TKLC/swap] fsck.ext3 -a /dev/md11
Mar 4 11:27:16 localhost rc.sysinit: Mounting local filesystems: succeeded
Mar 4 11:27:16 localhost rc.sysinit: Enabling local filesystem quotas: succeeded
Mar 4 11:27:17 localhost rc.sysinit: Enabling swap space: succeeded
Mar 4 11:27:17 localhost hdparm: setting unmaskirq to 1 (on)
Mar 4 11:27:17 localhost hdparm: unmaskirq = 1 (on)
Mar 4 11:27:17 localhost rc.sysinit: Setting hard drive parameters for hda: succeeded
Mar 4 11:27:17 localhost hdparm: setting unmaskirq to 1 (on)
Mar 4 11:27:17 localhost rc.sysinit: Setting hard drive parameters for hdc: succeeded
Mar 4 11:27:17 localhost hdparm: unmaskirq = 1 (on)
Mar 4 11:27:19 localhost init: Entering runlevel: 3
Mar 4 11:27:19 localhost pid_conf: Running pid_conf:
Mar 4 11:27:19 localhost pid_conf: WARNING!!! Could not open pidfile for read!!!
Mar 4 11:27:19 localhost pid_conf: PIDFILE: /var/TKLC/run/syscheck.pid
Mar 4 11:27:19 localhost pid_conf: failed
Mar 4 11:27:19 localhost pid_conf: [
Mar 4 11:27:19 localhost rc: Starting pid_conf: succeeded
Mar 4 11:27:20 localhost sysctl: net.ipv4.ip_forward = 0
Mar 4 11:27:20 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 4 11:27:20 localhost sysctl: kernel.sysrq = 0
Mar 4 11:27:20 localhost sysctl: kernel.core_uses_pid = 1
Mar 4 11:27:20 localhost network: Setting network parameters: succeeded
Mar 4 11:27:20 localhost network: Bringing up loopback interface: succeeded
Mar 4 11:27:22 localhost network: Bringing up interface eth0: succeeded
Mar 4 11:27:25 localhost network: Bringing up interface eth1: succeeded
Mar 4 11:27:28 localhost network: Bringing up interface eth2: succeeded
Mar 4 11:27:31 localhost network: Bringing up interface eth3: succeeded
Mar 4 11:27:33 localhost network: Bringing up interface eth4: succeeded
Mar 4 11:27:36 localhost network: Bringing up interface eth5: succeeded
Mar 4 11:27:38 localhost network: Bringing up interface eth6: succeeded
Mar 4 11:27:41 localhost network: Bringing up interface eth7: succeeded
Mar 4 11:27:43 localhost network: Bringing up interface eth8: succeeded
Mar 4 11:27:47 localhost atd: atd startup succeeded
Mar 4 11:27:58 localhost login(pam_unix)[1596]: session opened for user root by LOGIN(uid=0)
Mar 4 11:27:58 localhost -- root[1596]: DIALUP AT ttyS0 BY root
Mar 4 11:27:58 localhost -- root[1596]: ROOT LOGIN ON ttyS0
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: PCI init issues 2003-03-04 16:26 PCI init issues david.knierim @ 2003-03-04 16:41 ` Linus Torvalds 2003-03-04 17:54 ` Ron Arts 1 sibling, 0 replies; 16+ messages in thread From: Linus Torvalds @ 2003-03-04 16:41 UTC (permalink / raw) To: david.knierim Cc: Ivan Kokshaysky, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, raarts, Robert Olsson On Tue, 4 Mar 2003 david.knierim@tekelec.com wrote: > > Here is the full messages output for a system with this problem. I had > only provided part of the > messages file to him earlier. This is the entire output. Well, the interesting parts are missing, because your klogd output has been truncated due to the huge output from the md layer etc. However, I suspect strongly that the issue is in IO_APIC_get_PCI_irq_vector() in arch/i386/kernel/io_apic.c, and I would further guess that it's the fact that your MP tables don't have the full mapping or we're somehow screwing it up. Can you add a printk() to the case where we return "best_guess" at the end of that function? We have that fuzzy match thing where if we cannot find the exact entry in the MP table we instead use the first entry that matches in everything but the <pin> number, and it would be interesting to hear if that's the logic that triggers. It's also quite possible that your MP tables just aren't right, and the reason XP works on the machine is that XP uses the ACPI irq lookup stuff. You could try enabling ACPI bootup support (I've never used it on 2.4.x myself, but it's required for at least one of my machines and works fine on 2.5.x). Linus ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 16:26 PCI init issues david.knierim 2003-03-04 16:41 ` Linus Torvalds @ 2003-03-04 17:54 ` Ron Arts 2003-03-04 18:26 ` Ivan Kokshaysky 1 sibling, 1 reply; 16+ messages in thread From: Ron Arts @ 2003-03-04 17:54 UTC (permalink / raw) To: david.knierim Cc: Ivan Kokshaysky, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, raarts, Robert Olsson, Linus Torvalds [-- Attachment #1.1: Type: text/plain, Size: 388 bytes --] david.knierim@tekelec.com wrote: > > Ivan, > Here is the full messages output for a system with this problem. I had > only provided part of the > messages file to him earlier. This is the entire output. Hello, On Jamal's request: Here is dmesg output for another system experiencing this problem. It may not be complete, so I also included part of /var/log/messages. Ron Arts [-- Attachment #1.2: dmesg --] [-- Type: text/plain, Size: 15316 bytes --] ies=257945 Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 per-CPU timeslice cutoff: 1462.93 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4784.26 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Booting processor 2/6 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4784.26 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU2: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4784.26 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU3: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Total of 4 processors activated (19103.65 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-7, 2-10, 2-11, 2-12, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-6, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 008 08 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 00F 0F 0 0 0 0 0 1 1 51 06 00F 0F 0 0 0 0 0 1 1 59 07 000 00 1 0 0 0 0 0 0 00 08 00F 0F 0 0 0 0 0 1 1 61 09 00F 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 00F 0F 0 0 0 0 0 1 1 71 0e 00F 0F 0 0 0 0 0 1 1 79 0f 00F 0F 0 0 0 0 0 1 1 81 10 00F 0F 1 1 0 1 0 1 1 89 11 00F 0F 1 1 0 1 0 1 1 91 12 00F 0F 1 1 0 1 0 1 1 99 13 00F 0F 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 00F 0F 1 1 0 1 0 1 1 A9 05 00F 0F 1 1 0 1 0 1 1 B1 06 000 00 1 0 0 0 0 0 0 00 07 00F 0F 1 1 0 1 0 1 1 B9 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 1 1 0 1 0 1 1 C1 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ28 -> 1:4 IRQ29 -> 1:5 IRQ31 -> 1:7 IRQ48 -> 2:0 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2395.0997 MHz. ..... host bus clock speed is 99.1587 MHz. cpu: 0, clocks: 194934, slice: 38986 CPU0<T0:194928,T1:155936,D:6,S:38986,C:194934> cpu: 1, clocks: 194934, slice: 38986 cpu: 3, clocks: 194934, slice: 38986 cpu: 2, clocks: 194934, slice: 38986 CPU1<T0:194928,T1:116944,D:12,S:38986,C:194934> CPU2<T0:194928,T1:77968,D:2,S:38986,C:194934> CPU3<T0:194928,T1:38976,D:8,S:38986,C:194934> checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Discovered primary peer bus 10 [IRQ] PCI: Discovered primary peer bus 11 [IRQ] PCI: Discovered primary peer bus 12 [IRQ] PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B3,I4,P0) -> 48 PCI->APIC IRQ transform: (B3,I5,P1) -> 48 PCI->APIC IRQ transform: (B3,I6,P2) -> 48 PCI->APIC IRQ transform: (B3,I7,P3) -> 48 PCI->APIC IRQ transform: (B4,I2,P2) -> 28 PCI->APIC IRQ transform: (B4,I2,P3) -> 29 PCI->APIC IRQ transform: (B4,I4,P0) -> 31 PCI->APIC IRQ transform: (B5,I1,P1) -> 16 PCI->APIC IRQ transform: (B5,I2,P2) -> 17 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e oprofile: can't get RTC I/O Ports block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide-floppy driver 0.99.newide Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 257k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs blk: queue c45f8418, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST336607LC Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c2d9fe18, I/O limit 4095Mb (mask 0xffffffff) Vendor: SDR Model: GEM318 Rev: 0 Type: Processor ANSI SCSI revision: 02 blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:1:0: Tagged Queuing enabled. Depth 253 blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) Partition check: sda: sda1 sda2 sda3 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 200k freed EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,3), internal journal Adding Swap: 2040244k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: pci_module_init failed ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack (8192 buckets, 65536 max) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others divert: allocating divert_blk for eth0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:B9:2B, IRQ 17. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). [-- Attachment #1.3: messages --] [-- Type: text/plain, Size: 25571 bytes --] Mar 4 18:39:33 kernel syslog: syslogd startup succeeded Mar 4 18:39:33 kernel syslog: klogd startup succeeded Mar 4 18:39:33 kernel kernel: klogd 1.4.1, log source = /proc/kmsg started. Mar 4 18:39:33 kernel kernel: Linux version 2.4.18-24.8.0custom (root@miranda.tunnel.toeval.nl) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #4 SMP Mon Mar 3 16:55:40 CET 2003 Mar 4 18:39:33 kernel kernel: BIOS-provided physical RAM map: Mar 4 18:39:33 kernel kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Mar 4 18:39:33 kernel kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Mar 4 18:39:33 kernel kernel: BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) Mar 4 18:39:33 kernel kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Mar 4 18:39:33 kernel kernel: BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) Mar 4 18:39:33 kernel kernel: BIOS-e820: 000000007fef0000 - 000000007fefc000 (ACPI data) Mar 4 18:39:33 kernel kernel: BIOS-e820: 000000007fefc000 - 000000007ff00000 (ACPI NVS) Mar 4 18:39:33 kernel kernel: BIOS-e820: 000000007ff00000 - 000000007ff80000 (usable) Mar 4 18:39:33 kernel keytable: Loading keymap: Mar 4 18:39:33 kernel kernel: BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) Mar 4 18:39:33 kernel keytable: Mar 4 18:39:33 kernel kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Mar 4 18:39:33 kernel keytable: Mar 4 18:39:33 kernel kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Mar 4 18:39:33 kernel rc: Starting keytable: succeeded Mar 4 18:39:33 kernel kernel: BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) Mar 4 18:39:33 kernel kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Mar 4 18:39:33 kernel kernel: 1151MB HIGHMEM available. Mar 4 18:39:33 kernel kernel: 896MB LOWMEM available. Mar 4 18:39:33 kernel kernel: found SMP MP-table at 000f7040 Mar 4 18:39:33 kernel random: Initializing random number generator: succeeded Mar 4 18:39:33 kernel kernel: hm, page 000f7000 reserved twice. Mar 4 18:39:33 kernel kernel: hm, page 000f8000 reserved twice. Mar 4 18:39:33 kernel kernel: hm, page 0009f000 reserved twice. Mar 4 18:39:33 kernel kernel: hm, page 000a0000 reserved twice. Mar 4 18:39:33 kernel kernel: On node 0 totalpages: 524160 Mar 4 18:39:33 kernel kernel: zone(0): 4096 pages. Mar 4 18:39:33 kernel kernel: zone(1): 225280 pages. Mar 4 18:39:33 kernel kernel: zone(2): 294784 pages. Mar 4 18:39:33 kernel kernel: ACPI: Searched entire block, no RSDP was found. Mar 4 18:39:33 kernel kernel: ACPI: RSDP located at physical address c00f70a0 Mar 4 18:39:33 kernel kernel: RSD PTR v0 [PTLTD ] Mar 4 18:39:33 kernel kernel: __va_range(0x7fef850d, 0x68): idx=8 mapped at ffff6000 Mar 4 18:39:33 kernel kernel: ACPI table found: RSDT v1 [PTLTD RSDT 1540.0] Mar 4 18:39:33 kernel kernel: __va_range(0x7fefbe78, 0x24): idx=8 mapped at ffff6000 Mar 4 18:39:33 kernel kernel: __va_range(0x7fefbe78, 0x74): idx=8 mapped at ffff6000 Mar 4 18:39:33 kernel kernel: ACPI table found: FACP v1 [INTEL K_CANYON 1540.0] Mar 4 18:39:33 kernel autofs: automount startup succeeded Mar 4 18:39:33 kernel kernel: __va_range(0x7fefbeec, 0x24): idx=8 mapped at ffff6000 Mar 4 18:39:33 kernel kernel: __va_range(0x7fefbeec, 0x9c): idx=8 mapped at ffff6000 Mar 4 18:39:33 kernel kernel: ACPI table found: APIC v1 [PTLTD ^I APIC 1540.0] Mar 4 18:39:33 kernel kernel: __va_range(0x7fefbeec, 0x9c): idx=8 mapped at ffff6000 Mar 4 18:39:33 kernel kernel: LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) Mar 4 18:39:34 kernel kernel: CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: LAPIC (acpi_id[0x0001] id[0x6] enabled[1]) Mar 4 18:39:34 kernel kernel: CPU 1 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16 Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: LAPIC (acpi_id[0x0002] id[0x1] enabled[1]) Mar 4 18:39:34 kernel kernel: CPU 2 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16 Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: LAPIC (acpi_id[0x0003] id[0x7] enabled[1]) Mar 4 18:39:34 kernel kernel: CPU 3 (0x0700) enabledProcessor #7 Pentium 4(tm) XEON(tm) APIC version 16 Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) Mar 4 18:39:34 kernel kernel: IOAPIC (id[0x3] address[0xfec80000] global_irq_base[0x18]) Mar 4 18:39:34 kernel kernel: IOAPIC (id[0x4] address[0xfec80400] global_irq_base[0x30]) Mar 4 18:39:34 kernel kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) Mar 4 18:39:34 kernel kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Mar 4 18:39:34 kernel kernel: LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1]) Mar 4 18:39:34 kernel kernel: LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1]) Mar 4 18:39:34 kernel kernel: LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1]) Mar 4 18:39:34 kernel kernel: LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1]) Mar 4 18:39:34 kernel kernel: 4 CPUs total Mar 4 18:39:34 kernel kernel: Local APIC address fee00000 Mar 4 18:39:34 kernel kernel: __va_range(0x7fefbf88, 0x24): idx=8 mapped at ffff6000 Mar 4 18:39:34 kernel kernel: __va_range(0x7fefbf88, 0x28): idx=8 mapped at ffff6000 Mar 4 18:39:34 kernel kernel: ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.0] Mar 4 18:39:34 kernel kernel: __va_range(0x7fefbfb0, 0x24): idx=8 mapped at ffff6000 Mar 4 18:39:34 kernel kernel: __va_range(0x7fefbfb0, 0x50): idx=8 mapped at ffff6000 Mar 4 18:39:34 kernel kernel: ACPI table found: SPCR v1 [PTLTD $UCRTBL$ 1540.0] Mar 4 18:39:34 kernel kernel: Enabling the CPU's according to the ACPI table Mar 4 18:39:34 kernel kernel: Intel MultiProcessor Specification v1.4 Mar 4 18:39:34 kernel kernel: Virtual Wire compatibility mode. Mar 4 18:39:34 kernel kernel: OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000 Mar 4 18:39:34 kernel kernel: I/O APIC #2 Version 32 at 0xFEC00000. Mar 4 18:39:34 kernel kernel: I/O APIC #3 Version 32 at 0xFEC80000. Mar 4 18:39:34 kernel kernel: I/O APIC #4 Version 32 at 0xFEC80400. Mar 4 18:39:34 kernel kernel: Processors: 4 Mar 4 18:39:34 kernel kernel: Kernel command line: ro root=LABEL=/ pirq="58,57,56,55,54,53,52,51,50" Mar 4 18:39:34 kernel kernel: PIRQ redirection, working around broken MP-BIOS. Mar 4 18:39:34 kernel kernel: Initializing CPU#0 Mar 4 18:39:34 kernel sshd: Starting sshd: Mar 4 18:39:34 kernel kernel: Detected 2395.865 MHz processor. Mar 4 18:39:34 kernel kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized Mar 4 18:39:34 kernel kernel: Console: colour VGA+ 80x25 Mar 4 18:39:34 kernel kernel: Calibrating delay loop... 4750.85 BogoMIPS Mar 4 18:39:34 kernel kernel: Memory: 2059336k/2096640k available (1451k kernel code, 32628k reserved, 1090k data, 200k init, 1179072k highmem) Mar 4 18:39:34 kernel kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Mar 4 18:39:34 kernel kernel: Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mar 4 18:39:34 kernel kernel: Mount cache hash table entries: 32768 (order: 6, 262144 bytes) Mar 4 18:39:34 kernel kernel: Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Mar 4 18:39:34 kernel kernel: Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) Mar 4 18:39:34 kernel kernel: CPU: L1 I cache: 0K, L1 D cache: 8K Mar 4 18:39:34 kernel kernel: CPU: L2 cache: 512K Mar 4 18:39:34 kernel kernel: CPU: Physical Processor ID: 0 Mar 4 18:39:34 kernel kernel: Intel machine check architecture supported. Mar 4 18:39:34 kernel kernel: Intel machine check reporting enabled on CPU#0. Mar 4 18:39:34 kernel kernel: Enabling fast FPU save and restore... done. Mar 4 18:39:34 kernel kernel: Enabling unmasked SIMD FPU exception support... done. Mar 4 18:39:34 kernel kernel: Checking 'hlt' instruction... OK. Mar 4 18:39:34 kernel kernel: POSIX conformance testing by UNIFIX Mar 4 18:39:34 kernel kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Mar 4 18:39:34 kernel kernel: mtrr: detected mtrr type: Intel Mar 4 18:39:34 kernel kernel: CPU: L1 I cache: 0K, L1 D cache: 8K Mar 4 18:39:34 kernel kernel: CPU: L2 cache: 512K Mar 4 18:39:34 kernel kernel: CPU: Physical Processor ID: 0 Mar 4 18:39:34 kernel kernel: Intel machine check reporting enabled on CPU#0. Mar 4 18:39:34 kernel kernel: CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Mar 4 18:39:34 kernel kernel: per-CPU timeslice cutoff: 1462.93 usecs. Mar 4 18:39:34 kernel kernel: task migration cache decay timeout: 1 msecs. Mar 4 18:39:34 kernel kernel: enabled ExtINT on CPU#0 Mar 4 18:39:34 kernel kernel: ESR value before enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: ESR value after enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: Booting processor 1/1 eip 2000 Mar 4 18:39:34 kernel kernel: Initializing CPU#1 Mar 4 18:39:34 kernel kernel: masked ExtINT on CPU#1 Mar 4 18:39:34 kernel kernel: ESR value before enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: ESR value after enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: Calibrating delay loop... 4784.26 BogoMIPS Mar 4 18:39:34 kernel kernel: CPU: L1 I cache: 0K, L1 D cache: 8K Mar 4 18:39:34 kernel kernel: CPU: L2 cache: 512K Mar 4 18:39:34 kernel kernel: CPU: Physical Processor ID: 0 Mar 4 18:39:34 kernel kernel: Intel machine check reporting enabled on CPU#1. Mar 4 18:39:34 kernel kernel: CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Mar 4 18:39:34 kernel kernel: Booting processor 2/6 eip 2000 Mar 4 18:39:34 kernel kernel: Initializing CPU#2 Mar 4 18:39:34 kernel kernel: masked ExtINT on CPU#2 Mar 4 18:39:34 kernel kernel: ESR value before enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: ESR value after enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: Calibrating delay loop... 4784.26 BogoMIPS Mar 4 18:39:34 kernel kernel: CPU: L1 I cache: 0K, L1 D cache: 8K Mar 4 18:39:34 kernel kernel: CPU: L2 cache: 512K Mar 4 18:39:34 kernel kernel: CPU: Physical Processor ID: 3 Mar 4 18:39:34 kernel kernel: Intel machine check reporting enabled on CPU#2. Mar 4 18:39:34 kernel kernel: CPU2: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Mar 4 18:39:34 kernel kernel: Booting processor 3/7 eip 2000 Mar 4 18:39:34 kernel kernel: Initializing CPU#3 Mar 4 18:39:34 kernel kernel: masked ExtINT on CPU#3 Mar 4 18:39:34 kernel kernel: ESR value before enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: ESR value after enabling vector: 00000000 Mar 4 18:39:34 kernel kernel: Calibrating delay loop... 4784.26 BogoMIPS Mar 4 18:39:34 kernel kernel: CPU: L1 I cache: 0K, L1 D cache: 8K Mar 4 18:39:34 kernel kernel: CPU: L2 cache: 512K Mar 4 18:39:34 kernel kernel: CPU: Physical Processor ID: 3 Mar 4 18:39:34 kernel kernel: Intel machine check reporting enabled on CPU#3. Mar 4 18:39:34 kernel kernel: CPU3: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Mar 4 18:39:34 kernel kernel: Total of 4 processors activated (19103.65 BogoMIPS). Mar 4 18:39:34 kernel kernel: cpu_sibling_map[0] = 1 Mar 4 18:39:34 kernel kernel: cpu_sibling_map[1] = 0 Mar 4 18:39:34 kernel kernel: cpu_sibling_map[2] = 3 Mar 4 18:39:34 kernel kernel: cpu_sibling_map[3] = 2 Mar 4 18:39:34 kernel kernel: ENABLING IO-APIC IRQs Mar 4 18:39:34 kernel kernel: Setting 2 in the phys_id_present_map Mar 4 18:39:34 kernel kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. Mar 4 18:39:34 kernel kernel: Setting 3 in the phys_id_present_map Mar 4 18:39:34 kernel kernel: ...changing IO-APIC physical APIC ID to 3 ... ok. Mar 4 18:39:34 kernel kernel: Setting 4 in the phys_id_present_map Mar 4 18:39:34 kernel kernel: ...changing IO-APIC physical APIC ID to 4 ... ok. Mar 4 18:39:34 kernel kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 Mar 4 18:39:34 kernel kernel: testing the IO APIC....................... Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: WARNING: unexpected IO-APIC, please mail Mar 4 18:39:34 kernel kernel: to linux-smp@vger.kernel.org Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: Mar 4 18:39:34 kernel kernel: .................................... done. Mar 4 18:39:34 kernel kernel: Using local APIC timer interrupts. Mar 4 18:39:34 kernel kernel: calibrating APIC timer ... Mar 4 18:39:34 kernel kernel: ..... CPU clock speed is 2395.0997 MHz. Mar 4 18:39:34 kernel kernel: ..... host bus clock speed is 99.1587 MHz. Mar 4 18:39:34 kernel kernel: cpu: 0, clocks: 194934, slice: 38986 Mar 4 18:39:34 kernel kernel: CPU0<T0:194928,T1:155936,D:6,S:38986,C:194934> Mar 4 18:39:34 kernel kernel: cpu: 1, clocks: 194934, slice: 38986 Mar 4 18:39:34 kernel kernel: cpu: 3, clocks: 194934, slice: 38986 Mar 4 18:39:34 kernel kernel: cpu: 2, clocks: 194934, slice: 38986 Mar 4 18:39:34 kernel kernel: CPU1<T0:194928,T1:116944,D:12,S:38986,C:194934> Mar 4 18:39:34 kernel kernel: CPU2<T0:194928,T1:77968,D:2,S:38986,C:194934> Mar 4 18:39:34 kernel kernel: CPU3<T0:194928,T1:38976,D:8,S:38986,C:194934> Mar 4 18:39:34 kernel kernel: checking TSC synchronization across CPUs: passed. Mar 4 18:39:34 kernel kernel: migration_task 0 on cpu=0 Mar 4 18:39:34 kernel kernel: migration_task 1 on cpu=1 Mar 4 18:39:34 kernel kernel: migration_task 2 on cpu=2 Mar 4 18:39:34 kernel kernel: migration_task 3 on cpu=3 Mar 4 18:39:34 kernel kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=5 Mar 4 18:39:34 kernel kernel: PCI: Using configuration type 1 Mar 4 18:39:34 kernel kernel: PCI: Probing PCI hardware Mar 4 18:39:34 kernel kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge Mar 4 18:39:34 kernel kernel: PCI: Discovered primary peer bus 10 [IRQ] Mar 4 18:39:34 kernel kernel: PCI: Discovered primary peer bus 11 [IRQ] Mar 4 18:39:34 kernel kernel: PCI: Discovered primary peer bus 12 [IRQ] Mar 4 18:39:34 kernel kernel: PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B3,I4,P0) -> 48 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B3,I5,P1) -> 48 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B3,I6,P2) -> 48 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B3,I7,P3) -> 48 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B4,I2,P2) -> 28 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B4,I2,P3) -> 29 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B4,I4,P0) -> 31 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B5,I1,P1) -> 16 Mar 4 18:39:34 kernel kernel: PCI->APIC IRQ transform: (B5,I2,P2) -> 17 Mar 4 18:39:34 kernel kernel: isapnp: Scanning for PnP cards... Mar 4 18:39:34 kernel kernel: isapnp: No Plug & Play device found Mar 4 18:39:34 kernel kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Mar 4 18:39:34 kernel kernel: Linux NET4.0 for Linux 2.4 Mar 4 18:39:34 kernel kernel: Based upon Swansea University Computer Society NET3.039 Mar 4 18:39:34 kernel kernel: Initializing RT netlink socket Mar 4 18:39:34 kernel kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Mar 4 18:39:34 kernel kernel: apm: disabled - APM is not SMP safe. Mar 4 18:39:34 kernel kernel: Starting kswapd Mar 4 18:39:34 kernel kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces Mar 4 18:39:34 kernel kernel: VFS: Diskquotas version dquot_6.5.0 initialized Mar 4 18:39:34 kernel kernel: Detected PS/2 Mouse Port. Mar 4 18:39:34 kernel kernel: pty: 2048 Unix98 ptys configured Mar 4 18:39:34 kernel kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Mar 4 18:39:34 kernel kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A Mar 4 18:39:34 kernel kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A Mar 4 18:39:34 kernel kernel: Real Time Clock Driver v1.10e Mar 4 18:39:34 kernel kernel: oprofile: can't get RTC I/O Ports Mar 4 18:39:34 kernel kernel: block: 1024 slots per queue, batch=256 Mar 4 18:39:34 kernel kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Mar 4 18:39:34 kernel kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 4 18:39:34 kernel kernel: PIIX4: IDE controller on PCI bus 00 dev f9 Mar 4 18:39:35 kernel kernel: PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. Mar 4 18:39:35 kernel kernel: PIIX4: chipset revision 2 Mar 4 18:39:35 kernel kernel: PIIX4: not 100%% native mode: will probe irqs later Mar 4 18:39:35 kernel kernel: ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio Mar 4 18:39:35 kernel kernel: ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio Mar 4 18:39:35 kernel kernel: hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive Mar 4 18:39:35 kernel kernel: ide1 at 0x170-0x177,0x376 on irq 15 Mar 4 18:39:35 kernel kernel: ide-floppy driver 0.99.newide Mar 4 18:39:35 kernel kernel: Floppy drive(s): fd0 is 1.44M Mar 4 18:39:35 kernel kernel: FDC 0 is a post-1991 82077 Mar 4 18:39:35 kernel kernel: NET4: Frame Diverter 0.46 Mar 4 18:39:35 kernel kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Mar 4 18:39:35 kernel kernel: ide-floppy driver 0.99.newide Mar 4 18:39:35 kernel kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Mar 4 18:39:35 kernel kernel: md: Autodetecting RAID arrays. Mar 4 18:39:35 kernel kernel: md: autorun ... Mar 4 18:39:35 kernel kernel: md: ... autorun DONE. Mar 4 18:39:35 kernel kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4 Mar 4 18:39:35 kernel kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Mar 4 18:39:35 kernel kernel: IP Protocols: ICMP, UDP, TCP, IGMP Mar 4 18:39:35 kernel kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes Mar 4 18:39:35 kernel kernel: TCP: Hash tables configured (established 262144 bind 65536) Mar 4 18:39:35 kernel kernel: Linux IP multicast router 0.06 plus PIM-SM Mar 4 18:39:35 kernel kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Mar 4 18:39:35 kernel kernel: RAMDISK: Compressed image found at block 0 Mar 4 18:39:35 kernel kernel: Freeing initrd memory: 257k freed Mar 4 18:39:35 kernel kernel: VFS: Mounted root (ext2 filesystem). Mar 4 18:39:35 kernel kernel: SCSI subsystem driver Revision: 1.00 Mar 4 18:39:35 kernel kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Mar 4 18:39:35 kernel kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 Mar 4 18:39:35 kernel kernel: <Adaptec aic7899 Ultra160 SCSI adapter> Mar 4 18:39:35 kernel kernel: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Mar 4 18:39:35 kernel kernel: Mar 4 18:39:35 kernel kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 Mar 4 18:39:35 kernel kernel: <Adaptec aic7899 Ultra160 SCSI adapter> Mar 4 18:39:35 kernel kernel: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Mar 4 18:39:35 kernel kernel: Mar 4 18:39:35 kernel kernel: blk: queue c45f8418, I/O limit 4095Mb (mask 0xffffffff) Mar 4 18:39:35 kernel kernel: Vendor: SEAGATE Model: ST336607LC Rev: 0004 Mar 4 18:39:35 kernel kernel: Type: Direct-Access ANSI SCSI revision: 03 Mar 4 18:39:35 kernel kernel: blk: queue c2d9fe18, I/O limit 4095Mb (mask 0xffffffff) Mar 4 18:39:35 kernel kernel: Vendor: SDR Model: GEM318 Rev: 0 Mar 4 18:39:35 kernel kernel: Type: Processor ANSI SCSI revision: 02 Mar 4 18:39:35 kernel kernel: blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) Mar 4 18:39:35 kernel kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253 Mar 4 18:39:35 kernel kernel: blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) Mar 4 18:39:35 kernel kernel: Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 Mar 4 18:39:35 kernel kernel: (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Mar 4 18:39:35 kernel kernel: SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) Mar 4 18:39:35 kernel kernel: Partition check: Mar 4 18:39:35 kernel kernel: sda: sda1 sda2 sda3 Mar 4 18:39:35 kernel kernel: Journalled Block Device driver loaded Mar 4 18:39:35 kernel kernel: kjournald starting. Commit interval 5 seconds Mar 4 18:39:35 kernel kernel: EXT3-fs: mounted filesystem with ordered data mode. Mar 4 18:39:35 kernel kernel: Freeing unused kernel memory: 200k freed Mar 4 18:39:35 kernel kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,3), internal journal Mar 4 18:39:35 kernel kernel: Adding Swap: 2040244k swap-space (priority -1) Mar 4 18:39:35 kernel kernel: kjournald starting. Commit interval 5 seconds Mar 4 18:39:35 kernel kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal Mar 4 18:39:35 kernel kernel: EXT3-fs: mounted filesystem with ordered data mode. Mar 4 18:39:35 kernel kernel: ohci1394: pci_module_init failed Mar 4 18:39:35 kernel kernel: ip_tables: (C) 2000-2002 Netfilter core team Mar 4 18:39:35 kernel kernel: ip_conntrack (8192 buckets, 65536 max) Mar 4 18:39:35 kernel kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html Mar 4 18:39:35 kernel kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others Mar 4 18:39:35 kernel kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:B9:2B, IRQ 17. Mar 4 18:39:35 kernel kernel: Board assembly 000000-000, Physical connectors present: RJ45 Mar 4 18:39:35 kernel kernel: Primary interface chip i82555 PHY #1. Mar 4 18:39:35 kernel kernel: General self-test: passed. Mar 4 18:39:35 kernel kernel: Serial sub-system self-test: passed. Mar 4 18:39:35 kernel kernel: Internal registers self-test: passed. Mar 4 18:39:35 kernel kernel: ROM checksum self-test: passed (0xb874c1d3). Mar 4 18:39:35 kernel sshd: succeeded Mar 4 18:39:35 kernel sshd: Mar 4 18:39:35 kernel rc: Starting sshd: succeeded Mar 4 18:39:11 kernel rc.sysinit: Mounting proc filesystem: succeeded Mar 4 18:39:11 kernel rc.sysinit: Unmounting initrd: succeeded Mar 4 18:39:11 kernel sysctl: net.ipv4.conf.all.send_redirects = 0 Mar 4 18:39:11 kernel sysctl: net.ipv4.conf.all.secure_redirects = 0 Mar 4 18:39:11 kernel sysctl: net.ipv4.conf.all.accept_redirects = 0 Mar 4 18:39:11 kernel sysctl: net.ipv4.conf.all.accept_source_route = 0 Mar 4 18:39:11 kernel sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1 Mar 4 18:39:11 kernel sysctl: net.ipv4.ip_forward = 0 Mar 4 18:39:11 kernel sysctl: net.ipv4.conf.default.rp_filter = 1 Mar 4 18:39:11 kernel sysctl: kernel.sysrq = 0 Mar 4 18:39:11 kernel sysctl: kernel.core_uses_pid = 1 Mar 4 18:39:11 kernel rc.sysinit: Configuring kernel parameters: succeeded Mar 4 18:39:11 kernel date: Tue Mar 4 18:39:11 CET 2003 Mar 4 18:39:11 kernel rc.sysinit: Setting clock (localtime): Tue Mar 4 18:39:11 CET 2003 succeeded Mar 4 18:39:11 kernel rc.sysinit: Loading default keymap succeeded Mar 4 18:39:11 kernel rc.sysinit: Setting default font (latarcyrheb-sun16): succeeded Mar 4 18:39:11 kernel rc.sysinit: Setting hostname kernel.netland.nl: succeeded Mar 4 18:39:11 kernel rc.sysinit: Remounting root filesystem in read-write mode: succeeded Mar 4 18:39:35 kernel crond: crond startup succeeded Mar 4 18:39:11 kernel rc.sysinit: Activating swap partitions: succeeded Mar 4 18:39:13 kernel rc.sysinit: Finding module dependencies: succeeded Mar 4 18:39:13 kernel rc.sysinit: Mounting local filesystems: succeeded Mar 4 18:39:36 kernel anacron: anacron startup succeeded Mar 4 18:39:13 kernel rc.sysinit: Enabling local filesystem quotas: succeeded Mar 4 18:39:14 kernel rc.sysinit: Enabling swap space: succeeded Mar 4 18:39:15 kernel init: Entering runlevel: 3 Mar 4 18:39:16 kernel kudzu: Updating /etc/fstab succeeded Mar 4 18:39:30 kernel kudzu: succeeded Mar 4 18:39:30 kernel rc: Starting iptables: succeeded Mar 4 18:39:30 kernel S10firewall[220]: Firewall starting Mar 4 18:39:30 kernel S10firewall[220]: Firewall started Mar 4 18:39:30 kernel rc: Starting firewall: succeeded Mar 4 18:39:30 kernel sysctl: net.ipv4.conf.all.send_redirects = 0 Mar 4 18:39:30 kernel sysctl: net.ipv4.conf.all.secure_redirects = 0 Mar 4 18:39:30 kernel sysctl: net.ipv4.conf.all.accept_redirects = 0 Mar 4 18:39:30 kernel sysctl: net.ipv4.conf.all.accept_source_route = 0 Mar 4 18:39:30 kernel sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1 Mar 4 18:39:30 kernel sysctl: net.ipv4.ip_forward = 0 Mar 4 18:39:30 kernel sysctl: net.ipv4.conf.default.rp_filter = 1 Mar 4 18:39:30 kernel sysctl: kernel.sysrq = 0 Mar 4 18:39:30 kernel sysctl: kernel.core_uses_pid = 1 Mar 4 18:39:30 kernel network: Setting network parameters: succeeded Mar 4 18:39:31 kernel network: Bringing up loopback interface: succeeded Mar 4 18:39:33 kernel network: Bringing up interface eth0: succeeded [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 3465 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 17:54 ` Ron Arts @ 2003-03-04 18:26 ` Ivan Kokshaysky 2003-03-04 18:54 ` Linus Torvalds 0 siblings, 1 reply; 16+ messages in thread From: Ivan Kokshaysky @ 2003-03-04 18:26 UTC (permalink / raw) To: raarts Cc: david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, Robert Olsson, Linus Torvalds On Tue, Mar 04, 2003 at 06:54:02PM +0100, Ron Arts wrote: > It may not be complete, so I also included part of /var/log/messages. It's complete, thanks. > IO APIC #4...... ... > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 00F 0F 1 1 0 1 0 1 1 C1 > 01 000 00 1 0 0 0 0 0 0 00 > 02 000 00 1 0 0 0 0 0 0 00 > 03 000 00 1 0 0 0 0 0 0 00 ... > IRQ to pin mappings: ... > IRQ48 -> 2:0 Indeed, looks like only pin 0 (INT_A of that card) is connected. :-( Ivan. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 18:26 ` Ivan Kokshaysky @ 2003-03-04 18:54 ` Linus Torvalds 2003-03-04 19:37 ` Ron Arts ` (2 more replies) 0 siblings, 3 replies; 16+ messages in thread From: Linus Torvalds @ 2003-03-04 18:54 UTC (permalink / raw) To: Ivan Kokshaysky Cc: raarts, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, Robert Olsson On Tue, 4 Mar 2003, Ivan Kokshaysky wrote: > > Indeed, looks like only pin 0 (INT_A of that card) is connected. :-( Well, I'd say it looks like the MP table _claims_ that only pin0 is connected. Remember: the claim was that this machine worked on WinXP. So there are at least two potential reasons for that: - The MP table is simply wrong, and WinXP gets the routing information from somewhere else (ie most likely ACPI) - The MP table is right, and only pin0 is connected, and WinXP only uses pin0 (ie it puts the card in some state where all irqs are shared across all of the four tulip chips). Maybe somebody can come up with other schenarios. It would be interesting to hear what "Device Manager" (or whatever it is called) unde WinXP claims the interrupts are on this machine... Are they all on irq 48 on XP too? Or has XP gotten magic knowledge somewhere (ACPI?) and they are on different irq's? Linus ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 18:54 ` Linus Torvalds @ 2003-03-04 19:37 ` Ron Arts 2003-03-04 22:46 ` Zwane Mwaikambo 2003-03-04 22:46 ` Ivan Kokshaysky 2003-03-05 13:54 ` Ron Arts 2 siblings, 1 reply; 16+ messages in thread From: Ron Arts @ 2003-03-04 19:37 UTC (permalink / raw) To: Linus Torvalds Cc: Ivan Kokshaysky, raarts, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, Robert Olsson [-- Attachment #1: Type: text/plain, Size: 1411 bytes --] Linus Torvalds wrote: > On Tue, 4 Mar 2003, Ivan Kokshaysky wrote: > >>Indeed, looks like only pin 0 (INT_A of that card) is connected. :-( > > > Well, I'd say it looks like the MP table _claims_ that only pin0 is > connected. Remember: the claim was that this machine worked on WinXP. > Well, I submitted the dmseg and messages because Jamal requested it (same motherboard, same 4-port card and same strange IRQ assignments), but this particular machine is not tested with XP, and I don't think we have that. I think we still have a disk with Win2000 on it. Would that help? Should have to wait until tomorrow though, I'm on Central European Time, and the machine is located elsewhere. Ron > So there are at least two potential reasons for that: > > - The MP table is simply wrong, and WinXP gets the routing information > from somewhere else (ie most likely ACPI) > > - The MP table is right, and only pin0 is connected, and WinXP only uses > pin0 (ie it puts the card in some state where all irqs are shared > across all of the four tulip chips). > > Maybe somebody can come up with other schenarios. > > It would be interesting to hear what "Device Manager" (or whatever it is > called) unde WinXP claims the interrupts are on this machine... Are they > all on irq 48 on XP too? Or has XP gotten magic knowledge somewhere > (ACPI?) and they are on different irq's? > > Linus [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 3465 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 19:37 ` Ron Arts @ 2003-03-04 22:46 ` Zwane Mwaikambo 2003-03-04 23:22 ` Ron Arts 0 siblings, 1 reply; 16+ messages in thread From: Zwane Mwaikambo @ 2003-03-04 22:46 UTC (permalink / raw) To: raarts Cc: Linus Torvalds, Ivan Kokshaysky, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, Linux Kernel, Robert Olsson On Tue, 4 Mar 2003, Ron Arts wrote: > > So there are at least two potential reasons for that: > > > > - The MP table is simply wrong, and WinXP gets the routing information > > from somewhere else (ie most likely ACPI) > > > > - The MP table is right, and only pin0 is connected, and WinXP only uses > > pin0 (ie it puts the card in some state where all irqs are shared > > across all of the four tulip chips). > > > > Maybe somebody can come up with other schenarios. > > > > It would be interesting to hear what "Device Manager" (or whatever it is > > called) unde WinXP claims the interrupts are on this machine... Are they > > all on irq 48 on XP too? Or has XP gotten magic knowledge somewhere > > (ACPI?) and they are on different irq's? > > > > Linus How about using 'mptable' (Authored by Pete Zaitcev) to view the bus,pin and ioapic layout? It showed all the INTA,B,C,D pins on a troublesome system of mine and helped track down the problem. http://people.redhat.com/zaitcev/linux/mptable-2.0.15a-1.i386.rpm http://people.redhat.com/zaitcev/linux/mptable-2.0.15a-1.src.rpm Regards, Zwane -- function.linuxpower.ca ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 22:46 ` Zwane Mwaikambo @ 2003-03-04 23:22 ` Ron Arts 2003-03-04 23:58 ` Zwane Mwaikambo 0 siblings, 1 reply; 16+ messages in thread From: Ron Arts @ 2003-03-04 23:22 UTC (permalink / raw) To: Zwane Mwaikambo Cc: raarts, Linus Torvalds, Ivan Kokshaysky, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, Linux Kernel, Robert Olsson [-- Attachment #1.1: Type: text/plain, Size: 828 bytes --] Zwane Mwaikambo wrote: >>> >>>Maybe somebody can come up with other schenarios. >>> >>>It would be interesting to hear what "Device Manager" (or whatever it is >>>called) unde WinXP claims the interrupts are on this machine... Are they >>>all on irq 48 on XP too? Or has XP gotten magic knowledge somewhere >>>(ACPI?) and they are on different irq's? >>> >>> Linus > > > How about using 'mptable' (Authored by Pete Zaitcev) to view the > bus,pin and ioapic layout? It showed all the INTA,B,C,D pins on a > troublesome system of mine and helped track down the problem. > > http://people.redhat.com/zaitcev/linux/mptable-2.0.15a-1.i386.rpm > http://people.redhat.com/zaitcev/linux/mptable-2.0.15a-1.src.rpm > > Regards, > Zwane Ok, I hope this adds anything. Attached is the output of `mptable -dmesg -extra` Ron Arts [-- Attachment #1.2: mptable.out --] [-- Type: text/plain, Size: 26810 bytes --] =============================================================================== MPTable, version 2.0.15 Linux ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f7040 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x2e mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x0x9f970 signature: 'PCMP' base table length: 412 version: 1.4 checksum: 0x5b OEM ID: ' ' Product ID: 'Kings Canyon' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 40 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x14 BSP, usable 15 2 4 0x3febfbff 6 0x14 AP, usable 15 2 4 0x3febfbff 1 0x14 AP, usable 15 2 4 0x3febfbff 7 0x14 AP, usable 15 2 4 0x3febfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6 ISA -- I/O APICs: APIC ID Version State Address 2 0x20 usable 0xfec00000 3 0x20 usable 0xfec80000 4 0x20 usable 0xfec80400 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 6 0 2 0 INT active-hi edge 6 1 2 1 INT active-hi edge 6 0 2 2 INT active-hi edge 6 3 2 3 INT active-hi edge 6 4 2 4 INT active-hi edge 6 5 2 5 INT active-hi edge 6 6 2 6 INT active-lo level 0 29:C 2 18 INT active-hi edge 6 8 2 8 INT active-hi edge 6 9 2 9 INT active-lo level 0 29:B 2 19 INT active-lo level 0 29:A 2 16 INT active-lo level 5 2:A 2 17 INT active-hi edge 6 13 2 13 INT active-hi edge 6 14 2 14 INT active-hi edge 6 15 2 15 INT active-lo level 3 4:A 4 0 INT active-lo level 3 5:A 4 0 INT active-lo level 3 6:A 4 0 INT active-lo level 3 7:A 4 0 INT active-lo level 4 2:A 3 4 INT active-lo level 4 2:B 3 5 INT active-lo level 4 4:A 3 7 INT active-lo level 5 1:A 2 16 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 6 0 255 0 NMI active-hi edge 6 0 255 1 ------------------------------------------------------------------------------- dmesg output: (TM) CPU 2.40GHz stepping 04 Total of 4 processors activated (19103.65 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-7, 2-10, 2-11, 2-12, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-6, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 008 08 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 00F 0F 0 0 0 0 0 1 1 51 06 00F 0F 0 0 0 0 0 1 1 59 07 000 00 1 0 0 0 0 0 0 00 08 00F 0F 0 0 0 0 0 1 1 61 09 00F 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 00F 0F 0 0 0 0 0 1 1 71 0e 00F 0F 0 0 0 0 0 1 1 79 0f 00F 0F 0 0 0 0 0 1 1 81 10 00F 0F 1 1 0 1 0 1 1 89 11 00F 0F 1 1 0 1 0 1 1 91 12 00F 0F 1 1 0 1 0 1 1 99 13 00F 0F 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 00F 0F 1 1 0 1 0 1 1 A9 05 00F 0F 1 1 0 1 0 1 1 B1 06 000 00 1 0 0 0 0 0 0 00 07 00F 0F 1 1 0 1 0 1 1 B9 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 1 1 0 1 0 1 1 C1 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ28 -> 1:4 IRQ29 -> 1:5 IRQ31 -> 1:7 IRQ48 -> 2:0 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2395.0997 MHz. ..... host bus clock speed is 99.1587 MHz. cpu: 0, clocks: 194934, slice: 38986 CPU0<T0:194928,T1:155936,D:6,S:38986,C:194934> cpu: 1, clocks: 194934, slice: 38986 cpu: 3, clocks: 194934, slice: 38986 cpu: 2, clocks: 194934, slice: 38986 CPU1<T0:194928,T1:116944,D:12,S:38986,C:194934> CPU2<T0:194928,T1:77968,D:2,S:38986,C:194934> CPU3<T0:194928,T1:38976,D:8,S:38986,C:194934> checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Discovered primary peer bus 10 [IRQ] PCI: Discovered primary peer bus 11 [IRQ] PCI: Discovered primary peer bus 12 [IRQ] PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B3,I4,P0) -> 48 PCI->APIC IRQ transform: (B3,I5,P1) -> 48 PCI->APIC IRQ transform: (B3,I6,P2) -> 48 PCI->APIC IRQ transform: (B3,I7,P3) -> 48 PCI->APIC IRQ transform: (B4,I2,P2) -> 28 PCI->APIC IRQ transform: (B4,I2,P3) -> 29 PCI->APIC IRQ transform: (B4,I4,P0) -> 31 PCI->APIC IRQ transform: (B5,I1,P1) -> 16 PCI->APIC IRQ transform: (B5,I2,P2) -> 17 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e oprofile: can't get RTC I/O Ports block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide-floppy driver 0.99.newide Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 257k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs blk: queue c45f8418, I/O limit 4095Mb (mask 0xffffffff) Vendor: SEAGATE Model: ST336607LC Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c2d9fe18, I/O limit 4095Mb (mask 0xffffffff) Vendor: SDR Model: GEM318 Rev: 0 Type: Processor ANSI SCSI revision: 02 blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:1:0: Tagged Queuing enabled. Depth 253 blk: queue c2d7cc18, I/O limit 4095Mb (mask 0xffffffff) Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) Partition check: sda: sda1 sda2 sda3 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 200k freed EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,3), internal journal Adding Swap: 2040244k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: pci_module_init failed ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack (8192 buckets, 65536 max) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others divert: allocating divert_blk for eth0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:24:B9:2B, IRQ 17. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=211.184.226.193 DST=217.170.33.118 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=10288 DF PROTO=TCP SPT=42855 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=211.184.226.193 DST=217.170.33.118 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=10289 DF PROTO=TCP SPT=42855 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=64.191.52.220 DST=217.170.33.118 LEN=40 TOS=0x10 PREC=0x00 TTL=242 ID=37872 PROTO=TCP SPT=60142 DPT=3128 WINDOW=16384 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=64.191.52.220 DST=217.170.33.118 LEN=40 TOS=0x10 PREC=0x00 TTL=242 ID=9057 PROTO=TCP SPT=19241 DPT=6588 WINDOW=16384 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=64.191.52.220 DST=217.170.33.118 LEN=40 TOS=0x10 PREC=0x00 TTL=242 ID=37385 PROTO=TCP SPT=20112 DPT=8080 WINDOW=16384 RES=0x00 SYN URGP=0 iptables: LDROP IN=eth0 OUT= MAC=00:30:48:24:b9:2b:00:c0:95:e0:a2:fa:08:00 SRC=211.41.128.70 DST=217.170.33.118 LEN=40 TOS=0x00 PREC=0x00 TTL=123 ID=16638 PROTO=TCP SPT=1524 DPT=1524 WINDOW=8620 RES=0x00 SYN URGP=0 Intel(R) PRO/1000 Network Driver - version 4.4.19-k2 Copyright (c) 1999-2002 Intel Corporation. divert: allocating divert_blk for eth1 eth1: Intel(R) PRO/1000 Network Connection Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth2 eth2: Digital DS21143 Tulip rev 65 at 0xf899c000, 00:C0:95:E6:69:B0, IRQ 48. tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth3 eth3: Digital DS21143 Tulip rev 65 at 0xf899e400, 00:C0:95:E6:69:B1, IRQ 48. tulip2: EEPROM default media type Autosense. tulip2: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip2: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip2: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip2: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth4 eth4: Digital DS21143 Tulip rev 65 at 0xf89f6800, 00:C0:95:E6:69:B2, IRQ 48. tulip3: EEPROM default media type Autosense. tulip3: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip3: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip3: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. tulip3: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. divert: allocating divert_blk for eth5 eth5: Digital DS21143 Tulip rev 65 at 0xf89f8c00, 00:C0:95:E6:69:B3, IRQ 48. --------------- scanpci output: pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x2540 Intel Device unknown pci bus 0x0000 cardnum 0x00 function 0x01: vendor 0x8086 device 0x2541 Intel Device unknown pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x8086 device 0x2543 Intel Device unknown pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x2482 Intel Device unknown pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x2484 Intel Device unknown pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x2487 Intel Device unknown pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Device unknown pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x2480 Intel Device unknown pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x248b Intel Device unknown pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x2483 Intel Device unknown pci bus 0x0001 cardnum 0x1c function 0x00: vendor 0x8086 device 0x1461 Intel Device unknown pci bus 0x0001 cardnum 0x1d function 0x00: vendor 0x8086 device 0x1460 Intel Device unknown pci bus 0x0001 cardnum 0x1e function 0x00: vendor 0x8086 device 0x1461 Intel Device unknown pci bus 0x0001 cardnum 0x1f function 0x00: vendor 0x8086 device 0x1460 Intel Device unknown pci bus 0x0002 cardnum 0x01 function 0x00: vendor 0x1011 device 0x0024 Digital DC21152 pci bus 0x0003 cardnum 0x04 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet pci bus 0x0003 cardnum 0x05 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet pci bus 0x0003 cardnum 0x06 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet pci bus 0x0003 cardnum 0x07 function 0x00: vendor 0x1011 device 0x0019 Digital DC21142 10/100 Mb/s Ethernet pci bus 0x0004 cardnum 0x02 function 0x00: vendor 0x9005 device 0x00cf Adaptec Device unknown pci bus 0x0004 cardnum 0x02 function 0x01: vendor 0x9005 device 0x00cf Adaptec Device unknown pci bus 0x0004 cardnum 0x04 function 0x00: vendor 0x8086 device 0x100d Intel Device unknown pci bus 0x0005 cardnum 0x01 function 0x00: vendor 0x1002 device 0x4752 ATI Mach64 GR pci bus 0x0005 cardnum 0x02 function 0x00: vendor 0x8086 device 0x1229 Intel 82557/8/9 10/100MBit network controller ----------------- /proc/pci output: PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. e7500 (Plumas) DRAM Controller (rev 3). Bus 0, device 0, function 1: Class ff00: Intel Corp. e7500 (Plumas) DRAM Controller Error Reporting (rev 3). Bus 0, device 2, function 0: PCI bridge: Intel Corp. e7500 (Plumas) HI_B Virtual PCI-to-PCI Bridge (F0) (rev 3). Master Capable. Latency=64. Min Gnt=4. Bus 0, device 29, function 0: USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 2). IRQ 16. I/O at 0x1400 [0x141f]. Bus 0, device 29, function 1: USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 2). IRQ 19. I/O at 0x1420 [0x143f]. Bus 0, device 29, function 2: USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 2). IRQ 18. I/O at 0x1440 [0x145f]. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 66). Master Capable. No bursts. Min Gnt=12. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801CA ISA Bridge (LPC) (rev 2). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801CA IDE U100 (rev 2). I/O at 0x1460 [0x146f]. Non-prefetchable 32 bit memory at 0x80000000 [0x800003ff]. Bus 0, device 31, function 3: SMBus: Intel Corp. 82801CA/CAM SMBus (rev 2). I/O at 0x1100 [0x111f]. Bus 1, device 28, function 0: PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 3). Non-prefetchable 32 bit memory at 0xfc100000 [0xfc100fff]. Bus 1, device 30, function 0: PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (#2) (rev 3). Non-prefetchable 32 bit memory at 0xfc101000 [0xfc101fff]. Bus 1, device 29, function 0: PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 3). Master Capable. Latency=64. Min Gnt=36. Bus 1, device 31, function 0: PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (#2) (rev 3). Master Capable. Latency=64. Min Gnt=36. Bus 2, device 1, function 0: PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 3). Master Capable. Latency=64. Min Gnt=4. Bus 3, device 4, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2000 [0x207f]. Non-prefetchable 32 bit memory at 0xfc200000 [0xfc2003ff]. Bus 3, device 5, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (#2) (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2080 [0x20ff]. Non-prefetchable 32 bit memory at 0xfc200400 [0xfc2007ff]. Bus 3, device 6, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (#3) (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2400 [0x247f]. Non-prefetchable 32 bit memory at 0xfc200800 [0xfc200bff]. Bus 3, device 7, function 0: Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (#4) (rev 65). IRQ 48. Master Capable. Latency=165. Min Gnt=20.Max Lat=40. I/O at 0x2480 [0x24ff]. Non-prefetchable 32 bit memory at 0xfc200c00 [0xfc200fff]. Bus 4, device 2, function 0: SCSI storage controller: Adaptec AIC-7899P U160/m (rev 1). IRQ 28. Master Capable. Latency=64. Min Gnt=40.Max Lat=25. I/O at 0x3000 [0x30ff]. Non-prefetchable 64 bit memory at 0xfc340000 [0xfc340fff]. Bus 4, device 2, function 1: SCSI storage controller: Adaptec AIC-7899P U160/m (#2) (rev 1). IRQ 29. Master Capable. Latency=64. Min Gnt=40.Max Lat=25. I/O at 0x3400 [0x34ff]. Non-prefetchable 64 bit memory at 0xfc341000 [0xfc341fff]. Bus 4, device 4, function 0: Ethernet controller: Intel Corp. 82544GC Gigabit Ethernet Controller (rev 2). IRQ 31. Master Capable. Latency=64. Min Gnt=255. Non-prefetchable 32 bit memory at 0xfc320000 [0xfc33ffff]. Non-prefetchable 32 bit memory at 0xfc300000 [0xfc31ffff]. I/O at 0x3800 [0x381f]. Bus 5, device 1, function 0: VGA compatible controller: ATI Technologies Inc Rage XL (rev 39). IRQ 16. Master Capable. Latency=64. Min Gnt=8. Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff]. I/O at 0x4000 [0x40ff]. Non-prefetchable 32 bit memory at 0xfc400000 [0xfc400fff]. Bus 5, device 2, function 0: Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 13). IRQ 17. Master Capable. Latency=64. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xfc401000 [0xfc401fff]. I/O at 0x4400 [0x443f]. Non-prefetchable 32 bit memory at 0xfc420000 [0xfc43ffff]. ------------------------ /proc/interrupts output: CPU0 CPU1 CPU2 CPU3 0: 2578705 2579945 2579879 2579906 IO-APIC-edge timer 1: 1 0 1 1 IO-APIC-edge keyboard 2: 0 0 0 0 XT-PIC cascade 8: 1 0 0 0 IO-APIC-edge rtc 15: 1 0 0 1 IO-APIC-edge ide1 17: 12260 12348 12338 12225 IO-APIC-level eth0 28: 1194 1251 1197 1228 IO-APIC-level aic7xxx 29: 4 4 4 4 IO-APIC-level aic7xxx 31: 13 12 12 12 IO-APIC-level eth1 48: 11 8 8 9 IO-APIC-level eth2, eth3, eth4, eth5 NMI: 0 0 0 0 LOC: 10318937 10318977 10318977 10318976 ERR: 0 MIS: 0 =============================================================================== [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 3465 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 23:22 ` Ron Arts @ 2003-03-04 23:58 ` Zwane Mwaikambo 0 siblings, 0 replies; 16+ messages in thread From: Zwane Mwaikambo @ 2003-03-04 23:58 UTC (permalink / raw) To: raarts Cc: Linus Torvalds, Ivan Kokshaysky, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, Linux Kernel, Robert Olsson On Wed, 5 Mar 2003, Ron Arts wrote: > I hope this adds anything. > Attached is the output of `mptable -dmesg -extra` I can't really help much but here is a quick interpretation, this is your card with all the irqs wired to PIN A which seems to correspond with what Donald Becker said. INT active-lo level 3 4:A 4 0 INT active-lo level 3 5:A 4 0 INT active-lo level 3 6:A 4 0 INT active-lo level 3 7:A 4 0 IO-APIC (apicid-pin) 2-0, <-- doesn't that actually mean pin0 on the ioapic servicing that card is not connected? (or due to mptables again) Zwane -- function.linuxpower.ca ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 18:54 ` Linus Torvalds 2003-03-04 19:37 ` Ron Arts @ 2003-03-04 22:46 ` Ivan Kokshaysky 2003-03-04 23:12 ` kuznet 2003-03-05 13:54 ` Ron Arts 2 siblings, 1 reply; 16+ messages in thread From: Ivan Kokshaysky @ 2003-03-04 22:46 UTC (permalink / raw) To: Linus Torvalds Cc: Ivan Kokshaysky, raarts, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, Robert Olsson On Tue, Mar 04, 2003 at 10:54:21AM -0800, Linus Torvalds wrote: > Well, I'd say it looks like the MP table _claims_ that only pin0 is > connected. Remember: the claim was that this machine worked on WinXP. It seems that "IRQ redirection table" is gathered directly from IO_APIC hardware (I may be wrong though), and it conforms to other data... > So there are at least two potential reasons for that: > > - The MP table is simply wrong, and WinXP gets the routing information > from somewhere else (ie most likely ACPI) > > - The MP table is right, and only pin0 is connected, and WinXP only uses > pin0 (ie it puts the card in some state where all irqs are shared > across all of the four tulip chips). > > Maybe somebody can come up with other schenarios. - XP is able to reprogramm the IO_APIC so that all four pins are routed properly. Sounds a bit heretical, I know. :-) Ivan. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 22:46 ` Ivan Kokshaysky @ 2003-03-04 23:12 ` kuznet 2003-03-05 11:06 ` Ivan Kokshaysky 0 siblings, 1 reply; 16+ messages in thread From: kuznet @ 2003-03-04 23:12 UTC (permalink / raw) To: Ivan Kokshaysky Cc: torvalds, ink, raarts, david.knierim, alexander, becker, greg, hadi, jgarzik, kuznet, linux-kernel, Robert.Olsson Hello! > - XP is able to reprogramm the IO_APIC so that all four pins are > routed properly. > > Sounds a bit heretical, I know. :-) Let me to cite message from Znyx engineer. >>The question is important. Looking into our implemenation, I see >>that it is strongly bound to correctness of mp table. > >We had a similar problem in about 1994, when we designed >the first multi-port adapters with a bridge. Most BIOSes at that >point did not initialize PPBs, or they did not do it correctly. We >decided to build the required support into our drivers. That meant >that some vendors with broken BIOS would point to us and say 'see >it works'. Our advantage in selling these people adapters, but >maybe it took a bit longer for the market to force vendors to fix >BIOSes. So, maybe the workaround is in znyx driver for XP. :-) BIOSes were fixed to understand the first level bridges, but I guess none of them construct correct tables for second level bridges. Alexey ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 23:12 ` kuznet @ 2003-03-05 11:06 ` Ivan Kokshaysky 0 siblings, 0 replies; 16+ messages in thread From: Ivan Kokshaysky @ 2003-03-05 11:06 UTC (permalink / raw) To: kuznet Cc: torvalds, raarts, david.knierim, alexander, becker, greg, hadi, jgarzik, linux-kernel, Robert.Olsson On Wed, Mar 05, 2003 at 02:12:50AM +0300, kuznet@ms2.inr.ac.ru wrote: > So, maybe the workaround is in znyx driver for XP. :-) Quite possible. > BIOSes were fixed to understand the first level bridges, > but I guess none of them construct correct tables > for second level bridges. OTOH, there are rumors that PCI resource management has been vastly improved in XP. I believe Alan and Russell tried that with rather long chain of of bridges using PCI expansion chassis and windows had no problems with it. Not sure about details though (i.e. what version of windows and whether additional drivers were required or not). Ivan. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: PCI init issues 2003-03-04 18:54 ` Linus Torvalds 2003-03-04 19:37 ` Ron Arts 2003-03-04 22:46 ` Ivan Kokshaysky @ 2003-03-05 13:54 ` Ron Arts 2003-03-07 19:19 ` [fixed] " Ivan Kokshaysky 2 siblings, 1 reply; 16+ messages in thread From: Ron Arts @ 2003-03-05 13:54 UTC (permalink / raw) To: Linus Torvalds Cc: Ivan Kokshaysky, raarts, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, Robert Olsson [-- Attachment #1: Type: text/plain, Size: 1431 bytes --] Linus Torvalds wrote: > On Tue, 4 Mar 2003, Ivan Kokshaysky wrote: > >>Indeed, looks like only pin 0 (INT_A of that card) is connected. :-( > > > Well, I'd say it looks like the MP table _claims_ that only pin0 is > connected. Remember: the claim was that this machine worked on WinXP. > > So there are at least two potential reasons for that: > > - The MP table is simply wrong, and WinXP gets the routing information > from somewhere else (ie most likely ACPI) > > - The MP table is right, and only pin0 is connected, and WinXP only uses > pin0 (ie it puts the card in some state where all irqs are shared > across all of the four tulip chips). > > Maybe somebody can come up with other schenarios. > > It would be interesting to hear what "Device Manager" (or whatever it is > called) unde WinXP claims the interrupts are on this machine... Are they > all on irq 48 on XP too? Or has XP gotten magic knowledge somewhere > (ACPI?) and they are on different irq's? > > Linus I installed Win 2000 on this machine. It assigned every port its own interrupt, (IRQ 48-51), but it reported 'device is not functioning properly' on the first port (IRQ 48). Ron Arts -- Netland Internet Services bedrijfsmatige internetoplossingen http://www.netland.nl Kruislaan 419 1098 VA Amsterdam info: 020-5628282 servicedesk: 020-5628280 fax: 020-5628281 Sorry Rabbit, Phasers are for kids... [-- Attachment #2: S/MIME Cryptographic Signature --] [-- Type: application/x-pkcs7-signature, Size: 3291 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* [fixed] Re: PCI init issues 2003-03-05 13:54 ` Ron Arts @ 2003-03-07 19:19 ` Ivan Kokshaysky 2003-03-10 18:43 ` jamal 0 siblings, 1 reply; 16+ messages in thread From: Ivan Kokshaysky @ 2003-03-07 19:19 UTC (permalink / raw) To: raarts Cc: Linus Torvalds, Ivan Kokshaysky, david.knierim, alexander, Donald Becker, Greg KH, jamal, Jeff Garzik, kuznet, linux-kernel, Robert Olsson Well, the BIOS on those systems is unable to handle add-on PCI bridges properly. The idea is to search the mp tables for at least one valid irq entry either for such bridge itself or for any of its children. This entry tells us at least how this PCI slot is wired to IO APIC. Assuming that 4 INT pins inside the slot are 1:1 mapped to APIC pins, we can add missing irq entries for this bridge to the kernel mp tables, reprogram the APIC accordingly and use these new entries to find correct irqs for devices behind that bridge. The patch is for 2.4 only. In 2.5 most interesting ioapic functions are defined for ACPI only - someone else ought to look into that. It cannot handle more than one level of external bridges as yet (i.e. things like expansion chassis). This can be easily fixed though. Ron Arts tested this on SuperMicro P4DPR-6GM-Q Dual Xeon motherboard with Adaptec Duralink 64 and ZNYX ZX346Q quad port cards, both worked fine. Ron says that ZNYX board didn't worked under XP, so apparently rumors about XP goodness are exaggerated. ;-) Ivan. --- 2.4.21p5/include/asm-i386/mpspec.h Thu Mar 6 16:36:54 2003 +++ linux/include/asm-i386/mpspec.h Thu Mar 6 16:36:36 2003 @@ -218,6 +218,7 @@ extern int mp_current_pci_id; extern unsigned long mp_lapic_addr; extern int pic_mode; extern int using_apic_timer; +extern int max_irq_sources; #endif --- 2.4.21p5/include/asm-i386/io_apic.h Fri Mar 7 13:58:20 2003 +++ linux/include/asm-i386/io_apic.h Fri Mar 7 13:30:15 2003 @@ -132,6 +132,9 @@ static inline void io_apic_sync(unsigned (void) *(IO_APIC_BASE(apic)+4); } +/* Setup one irq redirection entry. */ +extern int setup_one_IO_APIC_irq(int apic, int pin); + /* 1 if "noapic" boot option passed */ extern int skip_ioapic_setup; --- 2.4.21p5/arch/i386/kernel/pci-irq.c Fri Nov 29 02:53:09 2002 +++ linux/arch/i386/kernel/pci-irq.c Fri Mar 7 13:48:14 2003 @@ -701,6 +701,89 @@ void __init pcibios_irq_init(void) } } +#ifdef CONFIG_X86_IO_APIC +static void __init +bridge_fixup_irqs(struct pci_dev *dev) +{ + int apic, pin, i, slot; + struct pci_dev *parent; + struct mpc_config_intsrc m; + + parent = dev->bus->self; + + /* HACK. We need a generic way to detect the built-in bridges; + the "bridge swizzle" rule cannot be applied for those. + For now check for P64H/P64H2 bridges only. */ + if (!parent || (parent->class >> 8) != PCI_CLASS_BRIDGE_PCI || + parent->vendor != PCI_VENDOR_ID_INTEL || + (parent->device & ~0x700) != 0x1060) + return; + + slot = PCI_SLOT(dev->devfn) << 2; + + /* Check that there are mp irq entries either for this bridge itself + or for its children. */ + for (i = 0; i < mp_irq_entries; i++) { + int srcbus = mp_irqs[i].mpc_srcbus; + int srcslot = mp_irqs[i].mpc_srcbusirq & ~3; + + if (mp_irqs[i].mpc_irqtype != mp_INT) + continue; + + if ((srcbus == dev->bus->number && srcslot == slot) || + (srcbus >= dev->subordinate->number && + srcbus <= dev->subordinate->subordinate)) + break; + } + if (i >= mp_irq_entries) { + printk(KERN_WARNING "PCI: no IRQ routing found for bridge %s\n", + dev->slot_name); + return; + } + + /* Template for new entries. */ + m = mp_irqs[i]; + m.mpc_srcbus = dev->bus->number; + m.mpc_srcbusirq = slot; + m.mpc_dstirq &= ~3; /* Assume 1:1 mapping. */ + + for (apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mpc_apicid == m.mpc_dstapic) + break; + } + if (apic >= nr_ioapics) { + printk(KERN_WARNING "PCI: no I/O APIC found for bridge %s\n", + dev->slot_name); + return; + } + + for (pin = 0; pin < 4; pin++) { + /* Check whether or not we have matching mp entry. */ + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_irqtype == mp_INT && + mp_irqs[i].mpc_dstapic == m.mpc_dstapic && + mp_irqs[i].mpc_srcbusirq == slot + pin && + mp_irqs[i].mpc_srcbus == dev->bus->number) + break; + if (i < mp_irq_entries) + continue; + if (mp_irq_entries + 1 == max_irq_sources) + return; /* No room in mp irq table. */ + + /* Create a new mp irq entry. */ + printk(KERN_INFO "PCI: external bridge %s, INT%c fixup\n", + dev->slot_name, pin + 'A'); + mp_irqs[mp_irq_entries] = m; + mp_irqs[mp_irq_entries].mpc_srcbusirq += pin; + mp_irqs[mp_irq_entries].mpc_dstirq += pin; + ++mp_irq_entries; + + /* Now update the irq redirection entry. */ + setup_one_IO_APIC_irq(apic, m.mpc_dstirq + pin); + } +} +#endif + void __init pcibios_fixup_irqs(void) { struct pci_dev *dev; @@ -730,9 +813,14 @@ void __init pcibios_fixup_irqs(void) */ if (io_apic_assign_pci_irqs) { - int irq; + int irq, irq1 = -1; + + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) + bridge_fixup_irqs(dev); if (pin) { + struct pci_dev *bridge = dev->bus->self; + pin--; /* interrupt pins are numbered starting from 1 */ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); /* @@ -741,15 +829,18 @@ void __init pcibios_fixup_irqs(void) * parent slot, and pin number. The SMP code detects such bridged * busses itself so we should get into this branch reliably. */ - if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + if (dev->bus->parent) { /* go back to the bridge */ pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq1 = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); - if (irq >= 0) - printk(KERN_WARNING "PCI: using PPB(B%d,I%d,P%d) to get irq %d\n", - bridge->bus->number, PCI_SLOT(bridge->devfn), pin, irq); + } + if (irq1 >= 0 && irq1 != irq) { + /* IRQ for this device doesn't match one for parent slot. + Use the latter. */ + irq = irq1; + printk(KERN_WARNING "PCI: using PPB(B%d,I%d,P%d) to get irq %d\n", + bridge->bus->number, PCI_SLOT(bridge->devfn), pin, irq); } if (irq >= 0) { printk(KERN_INFO "PCI->APIC IRQ transform: (B%d,I%d,P%d) -> %d\n", --- 2.4.21p5/arch/i386/kernel/io_apic.c Thu Mar 6 15:58:25 2003 +++ linux/arch/i386/kernel/io_apic.c Thu Mar 6 16:00:23 2003 @@ -614,78 +614,88 @@ extern void (*interrupt[NR_IRQS])(void); static struct hw_interrupt_type ioapic_level_irq_type; static struct hw_interrupt_type ioapic_edge_irq_type; -void __init setup_IO_APIC_irqs(void) +int __init setup_one_IO_APIC_irq(int apic, int pin) { struct IO_APIC_route_entry entry; - int apic, pin, idx, irq, first_notcon = 1, vector; + int idx, irq, vector; unsigned long flags; + idx = find_irq_entry(apic,pin,mp_INT); + if (idx < 0) + return idx; + /* + * add it to the IO-APIC irq-routing table: + */ + memset(&entry,0,sizeof(entry)); + + entry.delivery_mode = INT_DELIVERY_MODE; + entry.dest_mode = (INT_DEST_ADDR_MODE != 0); + entry.mask = 0; /* enable IRQ */ + entry.dest.logical.logical_dest = target_cpus(); + + entry.trigger = irq_trigger(idx); + entry.polarity = irq_polarity(idx); + + if (irq_trigger(idx)) { + entry.trigger = 1; + entry.mask = 1; + } + + irq = pin_2_irq(idx, apic, pin); + /* + * skip adding the timer int on secondary nodes, which causes + * a small but painful rift in the time-space continuum + */ + if ((clustered_apic_mode == CLUSTERED_APIC_NUMAQ) + && (apic != 0) && (irq == 0)) + return 0; + else + add_pin_to_irq(irq, apic, pin); + + if (!apic && !IO_APIC_IRQ(irq)) + return 0; + + if (IO_APIC_IRQ(irq)) { + vector = assign_irq_vector(irq); + entry.vector = vector; + + if (IO_APIC_irq_trigger(irq)) + irq_desc[irq].handler = &ioapic_level_irq_type; + else + irq_desc[irq].handler = &ioapic_edge_irq_type; + + set_intr_gate(vector, interrupt[irq]); + + if (!apic && (irq < 16)) + disable_8259A_irq(irq); + } + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return 0; +} + +void __init setup_IO_APIC_irqs(void) +{ + int apic, pin, first_notcon = 1; + printk(KERN_DEBUG "init IO_APIC IRQs\n"); for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = (INT_DEST_ADDR_MODE != 0); - entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = target_cpus(); + if (setup_one_IO_APIC_irq(apic, pin) >= 0) + continue; - idx = find_irq_entry(apic,pin,mp_INT); - if (idx == -1) { if (first_notcon) { - printk(KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); + printk(KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", + mp_ioapics[apic].mpc_apicid, pin); first_notcon = 0; } else printk(", %d-%d", mp_ioapics[apic].mpc_apicid, pin); - continue; - } - - entry.trigger = irq_trigger(idx); - entry.polarity = irq_polarity(idx); - - if (irq_trigger(idx)) { - entry.trigger = 1; - entry.mask = 1; - } - - irq = pin_2_irq(idx, apic, pin); - /* - * skip adding the timer int on secondary nodes, which causes - * a small but painful rift in the time-space continuum - */ - if ((clustered_apic_mode == CLUSTERED_APIC_NUMAQ) - && (apic != 0) && (irq == 0)) - continue; - else - add_pin_to_irq(irq, apic, pin); - - if (!apic && !IO_APIC_IRQ(irq)) - continue; - - if (IO_APIC_IRQ(irq)) { - vector = assign_irq_vector(irq); - entry.vector = vector; - - if (IO_APIC_irq_trigger(irq)) - irq_desc[irq].handler = &ioapic_level_irq_type; - else - irq_desc[irq].handler = &ioapic_edge_irq_type; - - set_intr_gate(vector, interrupt[irq]); - - if (!apic && (irq < 16)) - disable_8259A_irq(irq); } - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); - } } if (!first_notcon) ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [fixed] Re: PCI init issues 2003-03-07 19:19 ` [fixed] " Ivan Kokshaysky @ 2003-03-10 18:43 ` jamal 2003-03-11 12:39 ` Ivan Kokshaysky 0 siblings, 1 reply; 16+ messages in thread From: jamal @ 2003-03-10 18:43 UTC (permalink / raw) To: Ivan Kokshaysky Cc: raarts, Linus Torvalds, david.knierim, alexander, Donald Becker, Greg KH, Jeff Garzik, kuznet, linux-kernel, Robert Olsson Ivan! Thanks very much for your efforts. Is there more testing youd like to see done? Could we get this patch in to Marcello for inclusion in the pre 2.4.21? cheers, jamal ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [fixed] Re: PCI init issues 2003-03-10 18:43 ` jamal @ 2003-03-11 12:39 ` Ivan Kokshaysky 0 siblings, 0 replies; 16+ messages in thread From: Ivan Kokshaysky @ 2003-03-11 12:39 UTC (permalink / raw) To: jamal Cc: raarts, Linus Torvalds, david.knierim, alexander, Donald Becker, Greg KH, Jeff Garzik, kuznet, linux-kernel, Robert Olsson On Mon, Mar 10, 2003 at 01:43:50PM -0500, jamal wrote: > Is there more testing youd like to see done? Yes, it would be interesting to test this on similar motherboards (with E7500 chipset) which do work without that patch, just to make sure it doesn't break something. > Could we get this patch in to Marcello for inclusion in the pre 2.4.21? Why not, but I'd like to clean it up first (will do in a next couple of days). Ivan. ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2003-03-11 12:30 UTC | newest] Thread overview: 16+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2003-03-04 16:26 PCI init issues david.knierim 2003-03-04 16:41 ` Linus Torvalds 2003-03-04 17:54 ` Ron Arts 2003-03-04 18:26 ` Ivan Kokshaysky 2003-03-04 18:54 ` Linus Torvalds 2003-03-04 19:37 ` Ron Arts 2003-03-04 22:46 ` Zwane Mwaikambo 2003-03-04 23:22 ` Ron Arts 2003-03-04 23:58 ` Zwane Mwaikambo 2003-03-04 22:46 ` Ivan Kokshaysky 2003-03-04 23:12 ` kuznet 2003-03-05 11:06 ` Ivan Kokshaysky 2003-03-05 13:54 ` Ron Arts 2003-03-07 19:19 ` [fixed] " Ivan Kokshaysky 2003-03-10 18:43 ` jamal 2003-03-11 12:39 ` Ivan Kokshaysky
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox