From: "Felipe Alfaro Solana" <felipe_alfaro@linuxmail.org>
To: baldrick@wanadoo.fr, alan@redhat.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5 BK boot hang after ide
Date: Sun, 23 Mar 2003 15:31:08 +0100 [thread overview]
Message-ID: <20030323143108.30109.qmail@linuxmail.org> (raw)
----- Original Message -----
From: Duncan Sands <baldrick@wanadoo.fr>
Date: Sun, 23 Mar 2003 14:44:21 +0100
To: alan@redhat.com
Subject: 2.5 BK boot hang after ide
> Copied down by hand:
>
> ...
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 00:11.1
> ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
> VP_IDE: Chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt 8235 (rev 00) IDE UDMA 133 controller on pci00:11.1
> ide0: BM_DMA at 0xfc00-0xfc07, BIOS settings: hda: DMA, hdb: DMA
> ide1: BM_DMA at 0xfc08-0xfc0f, BIOS settings: hdc: DMA, hdd: DMA
> hda: ST320423A, ATA DISK drive
> hdb: Maxtor 6E030L0, ATA DISK drive
> id0 at 0x1f0-0x1f7, 0x3f6 on irq 14
> hdc: TOSHIBA DVD-ROM SD-MI402, ATAPI CD/DVD-ROM drive
> hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177, 0x376 on irq 15
> hda: host protected area => 1
> hda : 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
> hda: hda1 hda2 hda3
> hdb: host protected area => 1
> hdb : 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(133)
> hdb: hdb1
> (hangs)
I'm experiencing exactly the same as you: 2.5 won't
continue past IDE. I've tried 2.5.65-ac3, 2.5.65-bk3
and 2.5.65-mm4. All of them fail at the same point.
I've tried using ACPI, APM, disabling preempt, TCQ,
enabling SysRq support, but had no luck.
The machine is a Pentium 4 2.0Gz, with a QDI
PlatiniX 2D/533-A (i845E), 2 UDMA100 disks
(Seagate ST380021A 80GB and IBM-DTLA-307030
20GB), a Pioneer DVD-ROM and Sony CRX185E3).
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
next reply other threads:[~2003-03-23 14:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-23 14:31 Felipe Alfaro Solana [this message]
2003-03-23 14:34 ` 2.5 BK boot hang after ide Duncan Sands
2003-03-23 15:48 ` Nicholas Wourms
2003-03-24 9:38 ` Duncan Sands
2003-03-24 13:16 ` Felipe Alfaro Solana
-- strict thread matches above, loose matches on Subject: below --
2003-03-23 14:49 Felipe Alfaro Solana
2003-03-23 13:44 Duncan Sands
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030323143108.30109.qmail@linuxmail.org \
--to=felipe_alfaro@linuxmail.org \
--cc=alan@redhat.com \
--cc=baldrick@wanadoo.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox