* [2.5.67] oops in hisax
@ 2003-04-08 16:37 Michael Buesch
0 siblings, 0 replies; only message in thread
From: Michael Buesch @ 2003-04-08 16:37 UTC (permalink / raw)
To: Karsten Keil; +Cc: linux-kernel
Hi.
I got an oops while booting 2.5.67 from hisax subsystem:
ksymoops 2.4.8 on i686 2.4.21-pre6. Options used
-v linux-2.5/linux-2.5.67/vmlinux (specified)
-K (specified)
-L (specified)
-O (specified)
-m linux-2.5/linux-2.5.67/System.map (specified)
Unable to handle kernel NULL pointer dereference at virtual address 00000004
c030c19a
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c030c19a>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: 00000000 ebx: cfd0fc00 ecx: cfd12000 edx: cfd0fde0
esi: cfd12000 edi: cfd1210c ebp: c1293de0 esp: c1293dd0
ds: 007b es: 007b ss: 0068
Stack: cfd0fc00 cfd0fc2c cfd0fc00 cfd12000 c1293e10 c0317b51 cfd0fc00 cfd12000
cfd1210c cfd1210c cfd12000 c1293e10 c0317a64 cfd12124 cfd1210c cfd12000
c1293e2c c0317d80 cfd1210c cfd1213c cfd12000 c1293e9e cfd120da c1293e48
Call Trace:
[<c0317b51>] init_d_st+0x52/0x11d
[<c0317a64>] init_PStack+0x20/0xbb
[<c0317d80>] init_chan+0x10b/0x115
[<c0317db0>] CallcNewChan+0x26/0xbf
[<c030a073>] hisax_register+0x86/0x12b
[<c0210240>] pci_device_probe+0x5a/0x68
[<c02758bd>] bus_match+0x43/0x6e
[<c02759be>] driver_attach+0x5d/0x6f
[<c0275cda>] bus_add_driver+0xe9/0xeb
[<c02760f4>] driver_register+0x3a/0x3e
[<c0210357>] pci_register_driver+0x49/0x59
[<c01291e2>] init_workqueues+0x12/0x2c
[<c01050a3>] init+0x39/0x196
[<c010506a>] init+0x0/0x196
[<c0107289>] kernel_thread_helper+0x5/0xb
Code: 8b 50 04 85 d2 75 0a 8b 5d f8 8b 75 fc 89 ec 5d c3 89 74 24
>>EIP; c030c19a <setstack_HiSax+85/a2> <=====
>>ebx; cfd0fc00 <_end+f792e48/3fa8304c>
>>ecx; cfd12000 <_end+f795248/3fa8304c>
>>edx; cfd0fde0 <_end+f793028/3fa8304c>
>>esi; cfd12000 <_end+f795248/3fa8304c>
>>edi; cfd1210c <_end+f795354/3fa8304c>
>>ebp; c1293de0 <_end+d17028/3fa8304c>
>>esp; c1293dd0 <_end+d17018/3fa8304c>
Trace; c0317b51 <init_d_st+52/11d>
Trace; c0317a64 <init_PStack+20/bb>
Trace; c0317d80 <init_chan+10b/115>
Trace; c0317db0 <CallcNewChan+26/bf>
Trace; c030a073 <hisax_register+86/12b>
Trace; c0210240 <pci_device_probe+5a/68>
Trace; c02758bd <bus_match+43/6e>
Trace; c02759be <driver_attach+5d/6f>
Trace; c0275cda <bus_add_driver+e9/eb>
Trace; c02760f4 <driver_register+3a/3e>
Trace; c0210357 <pci_register_driver+49/59>
Trace; c01291e2 <init_workqueues+12/2c>
Trace; c01050a3 <init+39/196>
Trace; c010506a <init+0/196>
Trace; c0107289 <kernel_thread_helper+5/b>
Code; c030c19a <setstack_HiSax+85/a2>
00000000 <_EIP>:
Code; c030c19a <setstack_HiSax+85/a2> <=====
0: 8b 50 04 mov 0x4(%eax),%edx <=====
Code; c030c19d <setstack_HiSax+88/a2>
3: 85 d2 test %edx,%edx
Code; c030c19f <setstack_HiSax+8a/a2>
5: 75 0a jne 11 <_EIP+0x11>
Code; c030c1a1 <setstack_HiSax+8c/a2>
7: 8b 5d f8 mov 0xfffffff8(%ebp),%ebx
Code; c030c1a4 <setstack_HiSax+8f/a2>
a: 8b 75 fc mov 0xfffffffc(%ebp),%esi
Code; c030c1a7 <setstack_HiSax+92/a2>
d: 89 ec mov %ebp,%esp
Code; c030c1a9 <setstack_HiSax+94/a2>
f: 5d pop %ebp
Code; c030c1aa <setstack_HiSax+95/a2>
10: c3 ret
Code; c030c1ab <setstack_HiSax+96/a2>
11: 89 74 24 00 mov %esi,0x0(%esp,1)
GDB:
Dump of assembler code for function setstack_HiSax:
0xc030c115 <setstack_HiSax>: push %ebp
0xc030c116 <setstack_HiSax+1>: mov %esp,%ebp
0xc030c118 <setstack_HiSax+3>: sub $0x10,%esp
0xc030c11b <setstack_HiSax+6>: mov %ebx,0xfffffff8(%ebp)
0xc030c11e <setstack_HiSax+9>: mov %esi,0xfffffffc(%ebp)
0xc030c121 <setstack_HiSax+12>: mov 0x8(%ebp),%ebx
0xc030c124 <setstack_HiSax+15>: mov 0xc(%ebp),%esi
0xc030c127 <setstack_HiSax+18>: mov %esi,0x4(%ebx)
0xc030c12a <setstack_HiSax+21>: mov 0x8(%esi),%eax
0xc030c12d <setstack_HiSax+24>: movl $0x0,0x10(%ebx)
0xc030c134 <setstack_HiSax+31>: movl $0x1,0x18(%ebx)
0xc030c13b <setstack_HiSax+38>: mov %eax,0x230(%ebx)
0xc030c141 <setstack_HiSax+44>: movl $0xc0573874,0x14(%ebx)
0xc030c148 <setstack_HiSax+51>: mov 0x9b0(%esi),%eax
0xc030c14e <setstack_HiSax+57>: movl $0xc030af09,0x28(%ebx)
0xc030c155 <setstack_HiSax+64>: movl $0x0,0x24(%ebx)
0xc030c15c <setstack_HiSax+71>: mov %eax,0x1c(%ebx)
0xc030c15f <setstack_HiSax+74>: mov %ebx,0x20(%ebx)
0xc030c162 <setstack_HiSax+77>: lea 0x2c(%ebx),%eax
0xc030c165 <setstack_HiSax+80>: mov %eax,0x4(%esp,1)
0xc030c169 <setstack_HiSax+84>: lea 0x14(%ebx),%eax
0xc030c16c <setstack_HiSax+87>: mov %eax,(%esp,1)
0xc030c16f <setstack_HiSax+90>: call 0xc031962c <FsmInitTimer>
0xc030c174 <setstack_HiSax+95>: mov %ebx,(%esp,1)
0xc030c177 <setstack_HiSax+98>: call 0xc030ce86 <setstack_tei>
0xc030c17c <setstack_HiSax+103>: mov %ebx,(%esp,1)
0xc030c17f <setstack_HiSax+106>: call 0xc03146bf <setstack_manager>
0xc030c184 <setstack_HiSax+111>: lea 0x98c(%esi),%eax
0xc030c18a <setstack_HiSax+117>: movl $0xc030be55,0x5c(%ebx)
0xc030c191 <setstack_HiSax+124>: mov %eax,0xc(%ebx)
0xc030c194 <setstack_HiSax+127>: mov 0xfc(%esi),%eax
0xc030c19a <setstack_HiSax+133>: mov 0x4(%eax),%edx
// => if (cs->dc_l1_ops->open)
// here it oopses
// dc_l1_ops == null-pointer here?
0xc030c19d <setstack_HiSax+136>: test %edx,%edx
0xc030c19f <setstack_HiSax+138>: jne 0xc030c1ab <setstack_HiSax+150>
0xc030c1a1 <setstack_HiSax+140>: mov 0xfffffff8(%ebp),%ebx
0xc030c1a4 <setstack_HiSax+143>: mov 0xfffffffc(%ebp),%esi
0xc030c1a7 <setstack_HiSax+146>: mov %ebp,%esp
0xc030c1a9 <setstack_HiSax+148>: pop %ebp
0xc030c1aa <setstack_HiSax+149>: ret
0xc030c1ab <setstack_HiSax+150>: mov %esi,0x4(%esp,1)
0xc030c1af <setstack_HiSax+154>: mov %ebx,(%esp,1)
0xc030c1b2 <setstack_HiSax+157>: call *0x4(%eax)
0xc030c1b5 <setstack_HiSax+160>: jmp 0xc030c1a1 <setstack_HiSax+140>
End of assembler dump.
I've tried to "fix" it with this realy stupid patch, but
I got another oops upon that (This was clear to me, while writing
the patch :)
--- drivers/isdn/hisax/isdnl1.c.orig 2003-04-08 17:52:08.000000000 +0200
+++ drivers/isdn/hisax/isdnl1.c 2003-04-08 17:53:35.000000000 +0200
@@ -905,7 +905,7 @@
setstack_manager(st);
st->l1.stlistp = &(cs->stlist);
st->l1.l2l1 = dch_l2l1;
- if (cs->dc_l1_ops->open)
+ if (cs->dc_l1_ops && cs->dc_l1_ops->open)
cs->dc_l1_ops->open(st, cs);
}
I have too small (very small) knowledge of the hisax subsystem, so I'm not
able to fix this oops. What's dc_l1_ops for? It seems to be a struct holding
various function pointers. Where *should* this pointer be assigned
(but actually isn't -> is currently null-pointer)?
Thanks for help.
Regards
Michael Buesch.
PS: Last part of ttylog is:
i2o_block: Checking for I2O Block devices...
i2o_scsi.c: Version 0.1.2
chain_pool: 0 bytes @ cfdc66a0
(512 byte buffers X 4 can_queue X 0 i2o controllers)
i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208)
md: raid0 personality registered as nr 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
ISDN subsystem initialized
PPP BSD Compression module registered
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (kernel)
HiSax: Layer1 Revision 2.41.6.5
HiSax: Layer2 Revision 2.25.6.4
HiSax: TeiMgr Revision 2.17.6.3
HiSax: Layer3 Revision 2.17.6.5
HiSax: LinkLayer Revision 2.51.6.6
HiSax: Approval certification failed because of
HiSax: unauthorized source code changes
hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
get_drv 0: 0 -> 1
HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
Unable to handle kernel NULL pointer dereference at virtual address 00000004
printing eip:
c030c19a
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c030c19a>] Not tainted
EFLAGS: 00010286
EIP is at setstack_HiSax+0x85/0xa2
eax: 00000000 ebx: cfd0fc00 ecx: cfd12000 edx: cfd0fde0
esi: cfd12000 edi: cfd1210c ebp: c1293de0 esp: c1293dd0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=c1292000 task=c12ae080)
Stack: cfd0fc00 cfd0fc2c cfd0fc00 cfd12000 c1293e10 c0317b51 cfd0fc00 cfd12000
cfd1210c cfd1210c cfd12000 c1293e10 c0317a64 cfd12124 cfd1210c cfd12000
c1293e2c c0317d80 cfd1210c cfd1213c cfd12000 c1293e9e cfd120da c1293e48
Call Trace:
[<c0317b51>] init_d_st+0x52/0x11d
[<c0317a64>] init_PStack+0x20/0xbb
[<c0317d80>] init_chan+0x10b/0x115
[<c0317db0>] CallcNewChan+0x26/0xbf
[<c030a073>] hisax_register+0x86/0x12b
[<c0210240>] pci_device_probe+0x5a/0x68
[<c02758bd>] bus_match+0x43/0x6e
[<c02759be>] driver_attach+0x5d/0x6f
[<c0275cda>] bus_add_driver+0xe9/0xeb
[<c02760f4>] driver_register+0x3a/0x3e
[<c0210357>] pci_register_driver+0x49/0x59
[<c01291e2>] init_workqueues+0x12/0x2c
[<c01050a3>] init+0x39/0x196
[<c010506a>] init+0x0/0x196
[<c0107289>] kernel_thread_helper+0x5/0xb
Code: 8b 50 04 85 d2 75 0a 8b 5d f8 8b 75 fc 89 ec 5d c3 89 74 24
<0>Kernel panic: Attempted to kill init!
--
My homepage: http://www.8ung.at/tuxsoft
fighting for peace is like fu**ing for virginity
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-04-08 16:26 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-04-08 16:37 [2.5.67] oops in hisax Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox