[PATCH] Add driver for powermac keywest i2c interface

[PATCH] Add driver for powermac keywest i2c interface

[Paul Mackerras]

Greg,

Here is a patch that adds an i2c bus driver for the i2c interface
found in the "KeyWest" and later combo-I/O chips used in powermacs.
The patch is against Linus' current BK tree.

Paul.

diff -urN linux-2.5/drivers/i2c/Kconfig pmac-2.5/drivers/i2c/Kconfig
--- linux-2.5/drivers/i2c/Kconfig	2003-04-08 07:21:20.000000000 +1000
+++ pmac-2.5/drivers/i2c/Kconfig	2003-04-10 10:16:42.000000000 +1000
@@ -142,6 +142,17 @@
 	  <file:Documentation/modules.txt>.
 	  The module will be called i2c-elektor.
 
+config I2C_KEYWEST
+	tristate "Powermac Keywest I2C interface"
+	depends on I2C && ALL_PPC
+	help
+	  This supports the use of the I2C interface in the combo-I/O
+	  chip on recent Apple machines.  Say Y if you have such a machine.
+
+	  This driver is also available as a module.  If you want to compile
+	  it as a module, say M here and read Documentation/modules.txt.
+	  The module will be called i2c-keywest.
+
 config ITE_I2C_ALGO
 	tristate "ITE I2C Algorithm"
 	depends on MIPS_ITE8172 && I2C
diff -urN linux-2.5/drivers/i2c/Makefile pmac-2.5/drivers/i2c/Makefile
--- linux-2.5/drivers/i2c/Makefile	2003-04-08 07:21:20.000000000 +1000
+++ pmac-2.5/drivers/i2c/Makefile	2003-04-08 08:30:33.000000000 +1000
@@ -10,6 +10,7 @@
 obj-$(CONFIG_I2C_VELLEMAN)	+= i2c-velleman.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
 obj-$(CONFIG_ITE_I2C_ALGO)	+= i2c-algo-ite.o
 obj-$(CONFIG_ITE_I2C_ADAP)	+= i2c-adap-ite.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
diff -urN linux-2.5/drivers/i2c/i2c-keywest.c pmac-2.5/drivers/i2c/i2c-keywest.c
--- linux-2.5/drivers/i2c/i2c-keywest.c	Thu Jan 01 10:00:00 1970
+++ pmac-2.5/drivers/i2c/i2c-keywest.c	Wed Apr 02 21:22:49 2003
@@ -0,0 +1,666 @@
+/*
+    i2c Support for Apple Keywest I2C Bus Controller
+
+    Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+
+    Original work by
+    
+    Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Changes:
+
+    2001/12/13 BenH	New implementation
+    2001/12/15 BenH	Add support for "byte" and "quick"
+                        transfers. Add i2c_xfer routine.
+
+    My understanding of the various modes supported by keywest are:
+
+     - Dumb mode : not implemented, probably direct tweaking of lines
+     - Standard mode : simple i2c transaction of type
+         S Addr R/W A Data A Data ... T
+     - Standard sub mode : combined 8 bit subaddr write with data read
+         S Addr R/W A SubAddr A Data A Data ... T
+     - Combined mode : Subaddress and Data sequences appended with no stop
+         S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
+
+    Currently, this driver uses only Standard mode for i2c xfer, and
+    smbus byte & quick transfers ; and uses StandardSub mode for
+    other smbus transfers instead of combined as we need that for the
+    sound driver to be happy
+*/
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+
+#include "i2c-keywest.h"
+
+#undef POLLED_MODE
+
+#define DBG(x...) do {\
+	if (debug > 0) \
+		printk(KERN_DEBUG "KW:" x); \
+	} while(0)
+
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
+MODULE_LICENSE("GPL");
+MODULE_PARM(probe, "i");
+MODULE_PARM(debug, "i");
+
+int probe = 0;
+int debug = 0;
+
+static struct keywest_iface *ifaces = NULL;
+
+#ifdef POLLED_MODE
+/* This isn't fast, but will go once I implement interrupt with
+ * proper timeout
+ */
+static u8
+wait_interrupt(struct keywest_iface* iface)
+{
+	int i;
+	u8 isr;
+	
+	for (i = 0; i < POLL_TIMEOUT; i++) {
+		isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
+		if (isr != 0)
+			return isr;
+		current->state = TASK_UNINTERRUPTIBLE;
+		schedule_timeout(1);
+	}
+	return isr;
+}
+#endif /* POLLED_MODE */
+
+
+static void
+do_stop(struct keywest_iface* iface, int result)
+{
+	write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_STOP);
+	iface->state = state_stop;
+	iface->result = result;
+}
+
+/* Main state machine for standard & standard sub mode */
+static void
+handle_interrupt(struct keywest_iface *iface, u8 isr)
+{
+	int ack;
+	
+	DBG("handle_interrupt(), got: %x, status: %x, state: %d\n",
+		isr, read_reg(reg_status), iface->state);
+	if (isr == 0 && iface->state != state_stop) {
+		do_stop(iface, -1);
+		return;
+	}
+	if (isr & KW_I2C_IRQ_STOP && iface->state != state_stop) {
+		iface->result = -1;
+		iface->state = state_stop;
+	}
+	switch(iface->state) {
+	case state_addr:
+		if (!(isr & KW_I2C_IRQ_ADDR)) {
+			do_stop(iface, -1);
+			break;
+		}
+		ack = read_reg(reg_status);
+		DBG("ack on set address: %x\n", ack);
+		if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+			do_stop(iface, -1);
+			break;
+		}
+		/* Handle rw "quick" mode */
+		if (iface->datalen == 0)
+			do_stop(iface, 0);
+		else if (iface->read_write == I2C_SMBUS_READ) {
+			iface->state = state_read;
+			if (iface->datalen > 1)
+				write_reg(reg_control, read_reg(reg_control)
+					| KW_I2C_CTL_AAK);
+		} else {
+			iface->state = state_write;
+			DBG("write byte: %x\n", *(iface->data));
+			write_reg(reg_data, *(iface->data++));
+			iface->datalen--;
+		}
+		
+		break;
+	case state_read:
+		if (!(isr & KW_I2C_IRQ_DATA)) {
+			do_stop(iface, -1);
+			break;
+		}
+		*(iface->data++) = read_reg(reg_data);
+		DBG("read byte: %x\n", *(iface->data-1));
+		iface->datalen--;
+		if (iface->datalen == 0)
+			iface->state = state_stop;
+		else
+			write_reg(reg_control, 0);
+		break;
+	case state_write:
+		if (!(isr & KW_I2C_IRQ_DATA)) {
+			do_stop(iface, -1);
+			break;
+		}
+		/* Check ack status */
+		ack = read_reg(reg_status);
+		DBG("ack on data write: %x\n", ack);
+		if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+			do_stop(iface, -1);
+			break;
+		}
+		if (iface->datalen) {
+			DBG("write byte: %x\n", *(iface->data));
+			write_reg(reg_data, *(iface->data++));
+			iface->datalen--;
+		} else
+			do_stop(iface, 0);
+		break;
+		
+	case state_stop:
+		if (!(isr & KW_I2C_IRQ_STOP) && (++iface->stopretry) < 10)
+			do_stop(iface, -1);
+		else {
+			iface->state = state_idle;
+			write_reg(reg_control, 0x00);
+			write_reg(reg_ier, 0x00);
+#ifndef POLLED_MODE
+			complete(&iface->complete);
+#endif /* POLLED_MODE */			
+		}
+		break;
+	}
+	
+	write_reg(reg_isr, isr);
+}
+
+#ifndef POLLED_MODE
+
+/* Interrupt handler */
+static void
+keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct keywest_iface *iface = (struct keywest_iface *)dev_id;
+
+	spin_lock(&iface->lock);
+	del_timer(&iface->timeout_timer);
+	handle_interrupt(iface, read_reg(reg_isr));
+	if (iface->state != state_idle) {
+		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+		add_timer(&iface->timeout_timer);
+	}
+	spin_unlock(&iface->lock);
+}
+
+static void
+keywest_timeout(unsigned long data)
+{
+	struct keywest_iface *iface = (struct keywest_iface *)data;
+
+	DBG("timeout !\n");
+	spin_lock_irq(&iface->lock);
+	handle_interrupt(iface, read_reg(reg_isr));
+	if (iface->state != state_idle) {
+		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+		add_timer(&iface->timeout_timer);
+	}
+	spin_unlock(&iface->lock);
+}
+
+#endif /* POLLED_MODE */
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32
+keywest_smbus_xfer(	struct i2c_adapter*	adap,
+			u16			addr,
+			unsigned short		flags,
+			char			read_write,
+			u8			command,
+			int			size,
+			union i2c_smbus_data*	data)
+{
+	struct keywest_chan* chan = i2c_get_adapdata(adap);
+	struct keywest_iface* iface = chan->iface;
+	int len;
+	u8* buffer;
+	u16 cur_word;
+	int rc = 0;
+
+	if (iface->state == state_dead)
+		return -1;
+		
+	/* Prepare datas & select mode */
+	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
+	switch (size) {
+	    case I2C_SMBUS_QUICK:
+	    	len = 0;
+	    	buffer = NULL;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+	    	break;
+	    case I2C_SMBUS_BYTE:
+	    	len = 1;
+	    	buffer = &data->byte;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+	    	break;
+	    case I2C_SMBUS_BYTE_DATA:
+	    	len = 1;
+	    	buffer = &data->byte;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+	    	break;
+	    case I2C_SMBUS_WORD_DATA:
+	    	len = 2;
+	    	cur_word = cpu_to_le16(data->word);
+	    	buffer = (u8 *)&cur_word;
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+		break;
+	    case I2C_SMBUS_BLOCK_DATA:
+	    	len = data->block[0];
+	    	buffer = &data->block[1];
+	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+		break;
+	    default:
+	    	return -1;
+	}
+
+	/* Original driver had this limitation */
+	if (len > 32)
+		len = 32;
+
+	down(&iface->sem);
+
+	DBG("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
+		chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
+
+	iface->data = buffer;
+	iface->datalen = len;
+	iface->state = state_addr;
+	iface->result = 0;
+	iface->stopretry = 0;
+	iface->read_write = read_write;
+	
+	/* Setup channel & clear pending irqs */
+	write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
+	write_reg(reg_isr, read_reg(reg_isr));
+	write_reg(reg_status, 0);
+
+	/* Set up address and r/w bit */
+	write_reg(reg_addr,
+		(addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
+
+	/* Set up the sub address */
+	if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
+	    || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
+		write_reg(reg_subaddr, command);
+
+	/* Arm timeout */
+	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+	add_timer(&iface->timeout_timer);
+
+	/* Start sending address & enable interrupt*/
+	write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_XADDR);
+	write_reg(reg_ier, KW_I2C_IRQ_MASK);
+
+#ifdef POLLED_MODE
+	DBG("using polled mode...\n");
+	/* State machine, to turn into an interrupt handler */
+	while(iface->state != state_idle) {
+		u8 isr = wait_interrupt(iface);
+		handle_interrupt(iface, isr);
+	}
+#else /* POLLED_MODE */
+	DBG("using interrupt mode...\n");
+	wait_for_completion(&iface->complete);	
+#endif /* POLLED_MODE */	
+
+	rc = iface->result;	
+	DBG("transfer done, result: %d\n", rc);
+
+	if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
+	    	data->word = le16_to_cpu(cur_word);
+	
+	/* Release sem */
+	up(&iface->sem);
+	
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint
+ */
+static int
+keywest_xfer(	struct i2c_adapter *adap,
+		struct i2c_msg msgs[], 
+		int num)
+{
+	struct keywest_chan* chan = i2c_get_adapdata(adap);
+	struct keywest_iface* iface = chan->iface;
+	struct i2c_msg *pmsg;
+	int i, completed;
+	int rc = 0;
+
+	down(&iface->sem);
+
+	/* Set adapter to standard mode */
+	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
+	iface->cur_mode |= KW_I2C_MODE_STANDARD;
+
+	completed = 0;
+	for (i = 0; rc >= 0 && i < num;) {
+		u8 addr;
+		
+		pmsg = &msgs[i++];
+		addr = pmsg->addr;
+		if (pmsg->flags & I2C_M_TEN) {
+			printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
+			rc = -EINVAL;
+			break;
+		}
+		DBG("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
+		     chan->chan_no,
+		     pmsg->flags & I2C_M_RD ? "read" : "write",
+                     pmsg->len, addr, i, num);
+    
+		/* Setup channel & clear pending irqs */
+		write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
+		write_reg(reg_isr, read_reg(reg_isr));
+		write_reg(reg_status, 0);
+		
+		iface->data = pmsg->buf;
+		iface->datalen = pmsg->len;
+		iface->state = state_addr;
+		iface->result = 0;
+		iface->stopretry = 0;
+		if (pmsg->flags & I2C_M_RD)
+			iface->read_write = I2C_SMBUS_READ;
+		else
+			iface->read_write = I2C_SMBUS_WRITE;
+
+		/* Set up address and r/w bit */
+		if (pmsg->flags & I2C_M_REV_DIR_ADDR)
+			addr ^= 1;		
+		write_reg(reg_addr,
+			(addr << 1) |
+			((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
+
+		/* Arm timeout */
+		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
+		add_timer(&iface->timeout_timer);
+
+		/* Start sending address & enable interrupt*/
+		write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_XADDR);
+		write_reg(reg_ier, KW_I2C_IRQ_MASK);
+
+#ifdef POLLED_MODE
+		DBG("using polled mode...\n");
+		/* State machine, to turn into an interrupt handler */
+		while(iface->state != state_idle) {
+			u8 isr = wait_interrupt(iface);
+			handle_interrupt(iface, isr);
+		}
+#else /* POLLED_MODE */
+		DBG("using interrupt mode...\n");
+		wait_for_completion(&iface->complete);	
+#endif /* POLLED_MODE */	
+
+		rc = iface->result;
+		if (rc == 0)
+			completed++;
+		DBG("transfer done, result: %d\n", rc);
+	}
+
+	/* Release sem */
+	up(&iface->sem);
+
+	return completed;
+}
+
+static u32
+keywest_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm keywest_algorithm = {
+	name:		"Keywest i2c",
+	id:		I2C_ALGO_SMBUS,
+	smbus_xfer:	keywest_smbus_xfer,
+	master_xfer:	keywest_xfer,
+	functionality:	keywest_func,
+};
+
+
+static int
+create_iface(struct device_node* np)
+{
+	unsigned long steps, *psteps, *prate;
+	unsigned bsteps, tsize, i, nchan, addroffset;
+	struct keywest_iface* iface;
+	int rc;
+
+	psteps = (unsigned long *)get_property(np, "AAPL,address-step", NULL);
+	steps = psteps ? (*psteps) : 0x10;
+
+	/* Hrm... maybe we can be smarter here */
+	for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
+		steps >>= 1;
+
+	if (!strcmp(np->parent->name, "uni-n")) {
+		nchan = 2;
+		addroffset = 3;
+	} else {
+		addroffset = 0;
+		nchan = 1;
+	}
+
+	tsize = sizeof(struct keywest_iface) +
+		(sizeof(struct keywest_chan) + 4) * nchan;
+	iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL);
+	if (iface == NULL) {
+		printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
+		return -ENOMEM;
+	}
+	memset(iface, 0, tsize);
+	init_MUTEX(&iface->sem);
+	spin_lock_init(&iface->lock);
+	init_completion(&iface->complete);
+	iface->bsteps = bsteps;
+	iface->chan_count = nchan;
+	iface->state = state_idle;
+	iface->irq = np->intrs[0].line;
+	iface->channels = (struct keywest_chan *)
+		(((unsigned long)(iface + 1) + 3UL) & ~3UL);
+	iface->base = (unsigned long)ioremap(np->addrs[0].address + addroffset,
+						np->addrs[0].size);
+	if (iface->base == 0) {
+		printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
+		kfree(iface);
+		return -ENOMEM;
+	}
+
+	init_timer(&iface->timeout_timer);
+	iface->timeout_timer.function = keywest_timeout;
+	iface->timeout_timer.data = (unsigned long)iface;
+
+	/* Select interface rate */
+	iface->cur_mode = KW_I2C_MODE_100KHZ;
+	prate = (unsigned long *)get_property(np, "AAPL,i2c-rate", NULL);
+	if (prate) switch(*prate) {
+	case 100:
+		iface->cur_mode = KW_I2C_MODE_100KHZ;
+		break;
+	case 50:
+		iface->cur_mode = KW_I2C_MODE_50KHZ;
+		break;
+	case 25:
+		iface->cur_mode = KW_I2C_MODE_25KHZ;
+		break;
+	default:
+		printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
+			*prate);
+	}
+	
+	/* Select standard sub mode */
+	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+	
+	/* Write mode */
+	write_reg(reg_mode, iface->cur_mode);
+	
+	/* Switch interrupts off & clear them*/
+	write_reg(reg_ier, 0x00);
+	write_reg(reg_isr, KW_I2C_IRQ_MASK);
+
+#ifndef POLLED_MODE
+	/* Request chip interrupt */	
+	rc = request_irq(iface->irq, keywest_irq, 0, "keywest i2c", iface);
+	if (rc) {
+		printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
+		iounmap((void *)iface->base);
+		kfree(iface);
+		return -ENODEV;
+	}
+#endif /* POLLED_MODE */
+
+	for (i=0; i<nchan; i++) {
+		struct keywest_chan* chan = &iface->channels[i];
+		u8 addr;
+		
+		sprintf(chan->adapter.dev.name, "%s %d", np->parent->name, i);
+		chan->iface = iface;
+		chan->chan_no = i;
+		chan->adapter.id = I2C_ALGO_SMBUS;
+		chan->adapter.algo = &keywest_algorithm;
+		chan->adapter.algo_data = NULL;
+		chan->adapter.client_register = NULL;
+		chan->adapter.client_unregister = NULL;
+		i2c_set_adapdata(&chan->adapter, chan);
+
+		rc = i2c_add_adapter(&chan->adapter);
+		if (rc) {
+			printk("i2c-keywest.c: Adapter %s registration failed\n",
+				chan->adapter.dev.name);
+			i2c_set_adapdata(&chan->adapter, NULL);
+		}
+		if (probe) {
+			printk("Probe: ");
+			for (addr = 0x00; addr <= 0x7f; addr++) {
+				if (i2c_smbus_xfer(&chan->adapter,addr,
+				    0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+					printk("%02x ", addr);
+			}
+			printk("\n");
+		}
+	}
+
+	printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
+		np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
+		
+	iface->next = ifaces;
+	ifaces = iface;
+	return 0;
+}
+
+static void
+dispose_iface(struct keywest_iface *iface)
+{
+	int i, rc;
+	
+	ifaces = iface->next;
+
+	/* Make sure we stop all activity */
+	down(&iface->sem);
+#ifndef POLLED_MODE
+	spin_lock_irq(&iface->lock);
+	while (iface->state != state_idle) {
+		spin_unlock_irq(&iface->lock);
+		schedule();
+		spin_lock_irq(&iface->lock);
+	}
+#endif /* POLLED_MODE */
+	iface->state = state_dead;
+#ifndef POLLED_MODE
+	spin_unlock_irq(&iface->lock);
+	free_irq(iface->irq, iface);
+#endif /* POLLED_MODE */
+	up(&iface->sem);
+
+	/* Release all channels */
+	for (i=0; i<iface->chan_count; i++) {
+		struct keywest_chan* chan = &iface->channels[i];
+		if (i2c_get_adapdata(&chan->adapter) == NULL)
+			continue;
+		rc = i2c_del_adapter(&chan->adapter);
+		i2c_set_adapdata(&chan->adapter, NULL);
+		/* We aren't that prepared to deal with this... */
+		if (rc)
+			printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
+	}
+	iounmap((void *)iface->base);
+	kfree(iface);
+}
+
+static int __init
+i2c_keywest_init(void)
+{
+	struct device_node *np;
+	int rc = -ENODEV;
+	
+	np = find_compatible_devices("i2c", "keywest");
+	while (np != 0) {
+		if (np->n_addrs >= 1 && np->n_intrs >= 1)
+			rc = create_iface(np);
+		np = np->next;
+	}
+	if (ifaces)
+		rc = 0;
+	return rc;
+}
+
+static void __exit
+i2c_keywest_cleanup(void)
+{
+	while(ifaces)
+		dispose_iface(ifaces);
+}
+
+module_init(i2c_keywest_init);
+module_exit(i2c_keywest_cleanup);
diff -urN linux-2.5/drivers/i2c/i2c-keywest.h pmac-2.5/drivers/i2c/i2c-keywest.h
--- linux-2.5/drivers/i2c/i2c-keywest.h	Thu Jan 01 10:00:00 1970
+++ pmac-2.5/drivers/i2c/i2c-keywest.h	Fri Feb 15 22:32:09 2002
@@ -0,0 +1,111 @@
+#ifndef __I2C_KEYWEST_H__
+#define __I2C_KEYWEST_H__
+
+/* The Tumbler audio equalizer can be really slow sometimes */
+#define POLL_TIMEOUT		(2*HZ)
+
+/* Register indices */
+typedef enum {
+	reg_mode = 0,
+	reg_control,
+	reg_status,
+	reg_isr,
+	reg_ier,
+	reg_addr,
+	reg_subaddr,
+	reg_data
+} reg_t;
+
+
+/* Mode register */
+#define KW_I2C_MODE_100KHZ	0x00
+#define KW_I2C_MODE_50KHZ	0x01
+#define KW_I2C_MODE_25KHZ	0x02
+#define KW_I2C_MODE_DUMB	0x00
+#define KW_I2C_MODE_STANDARD	0x04
+#define KW_I2C_MODE_STANDARDSUB	0x08
+#define KW_I2C_MODE_COMBINED	0x0C
+#define KW_I2C_MODE_MODE_MASK	0x0C
+#define KW_I2C_MODE_CHAN_MASK	0xF0
+
+/* Control register */
+#define KW_I2C_CTL_AAK		0x01
+#define KW_I2C_CTL_XADDR	0x02
+#define KW_I2C_CTL_STOP		0x04
+#define KW_I2C_CTL_START	0x08
+
+/* Status register */
+#define KW_I2C_STAT_BUSY	0x01
+#define KW_I2C_STAT_LAST_AAK	0x02
+#define KW_I2C_STAT_LAST_RW	0x04
+#define KW_I2C_STAT_SDA		0x08
+#define KW_I2C_STAT_SCL		0x10
+
+/* IER & ISR registers */
+#define KW_I2C_IRQ_DATA		0x01
+#define KW_I2C_IRQ_ADDR		0x02
+#define KW_I2C_IRQ_STOP		0x04
+#define KW_I2C_IRQ_START	0x08
+#define KW_I2C_IRQ_MASK		0x0F
+
+/* Physical interface */
+struct keywest_iface
+{
+	unsigned long		base;
+	unsigned		bsteps;
+	int			irq;
+	struct semaphore	sem;
+	spinlock_t		lock;
+	struct keywest_chan*	channels;
+	unsigned		chan_count;
+	u8			cur_mode;
+	char			read_write;
+	u8*			data;
+	unsigned		datalen;
+	int			state;
+	int			result;
+	int			stopretry;
+	struct timer_list	timeout_timer;
+	struct completion	complete;
+	struct keywest_iface*	next;
+};
+
+enum {
+	state_idle,
+	state_addr,
+	state_read,
+	state_write,
+	state_stop,
+	state_dead
+};
+
+/* Channel on an interface */
+struct keywest_chan
+{
+	struct i2c_adapter	adapter;
+	struct keywest_iface*	iface;
+	unsigned		chan_no;
+};
+
+/* Register access */
+
+static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
+{
+	return in_8(((volatile u8 *)iface->base)
+		+ (((unsigned)reg) << iface->bsteps));
+}
+
+static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
+{
+	out_8(((volatile u8 *)iface->base)
+		+ (((unsigned)reg) << iface->bsteps), val);
+	(void)__read_reg(iface, reg);
+	udelay(10);
+}
+
+#define write_reg(reg, val)	__write_reg(iface, reg, val) 
+#define read_reg(reg)		__read_reg(iface, reg) 
+
+
+
+#endif /* __I2C_KEYWEST_H__ */

Re: [PATCH] Add driver for powermac keywest i2c interface

[Greg KH]

On Thu, Apr 10, 2003 at 10:19:55AM +1000, Paul Mackerras wrote:
> Greg,
> 
> Here is a patch that adds an i2c bus driver for the i2c interface
> found in the "KeyWest" and later combo-I/O chips used in powermacs.
> The patch is against Linus' current BK tree.

Applied, thanks.

greg k-h