Re: Kernels since 2.5.60 upto 2.5.67 freeze when X server terminates

[florin@iucha.net (Florin Iucha)]

[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]

On Wed, Apr 16, 2003 at 12:42:08PM +0100, Alan Cox wrote:
> On Mer, 2003-04-16 at 01:45, Florin Iucha wrote:
> > On Tue, Apr 15, 2003 at 03:43:55PM -0700, Andrew Morton wrote:
> > > florin@iucha.net (Florin Iucha) wrote:
> > > >
> > > > I think it has to do with the interaction between XFree86 4.3.0 and
> > > > the AGP code.
> > > 
> > > Has anyone tried disabling kernel AGP support and retesting?
> > 
> > Now that you suggested it, I disabled kernel AGP support and 4.3.0
> > (Daniel Stone Debian packages) works fine so far.
> 
> Disablign AGP turned off 3D. There is a problem in a lot of the current
> DRI drivers where shared IRQs break as sometimes do restarts because
> the IRQ is not masked properly in the DRI module on close down. Its
> certainly true in the -ac tree (Radeon patch pending, someone apparently
> has other patches I need to chase).

I did a lspci -v and the Radeon has IRQ 5 all to itself. There is no
sharing.

I do suspect the 
agpgart: Putting AGP V2 device at 00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 01:00.0 into 4x mode
might give us a clue, since lspci says
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev
01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL
[Radeon 8500 LE]

Maybe the AGP code is trying to push some bits in the wrong
port/address?

Thanks,
florin

-- 

"NT is to UNIX what a doughnut is to a particle accelerator."

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]