From: Jens Axboe <axboe@suse.de>
To: Oleg Drokin <green@namesys.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
Oliver Neukum <oliver@neukum.org>,
lkhelp@rekl.yi.org, linux-kernel@vger.kernel.org
Subject: Re: 2.5.69, IDE TCQ can't be enabled
Date: Mon, 12 May 2003 15:23:30 +0200 [thread overview]
Message-ID: <20030512132330.GB17033@suse.de> (raw)
In-Reply-To: <20030512132209.GB4165@namesys.com>
On Mon, May 12 2003, Oleg Drokin wrote:
> Hello!
>
> On Mon, May 12, 2003 at 03:16:17PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > > Just a note that we have found TCQ unusable on our IBM drives and we had
> > > > some reports about TCQ unusable on some WD drives.
> > > > Unusable means severe FS corruptions starting from mount.
> > > > So if your FSs will suddenly start to break, start looking for cause with
> > > > disabling TCQ, please.
> > > I can confirm that. This drive Model=IBM-DTLA-307045, FwRev=TX6OA60A,
> > > SerialNo=YMCYMT3Y229 has eaten my filesystem with TCQ on 2.5.69
> > TCQ is marked EXPERIMENTAL and is known to be broken.
> > Probably it should be marked DANGEROUS or removed?
>
> How do you think people will test code that is removed?
> Or do you mean that nobody plans to look at this ever?
> I remember that Jens Axboe promised to take a look at it some
> months ago.
Yeah, that is correct. OTOH, it's not a great loss. The SATA tcq will be
much better, ide tcq is a really horrible beast.
--
Jens Axboe
next prev parent reply other threads:[~2003-05-12 13:11 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-10 1:38 2.5.69, IDE TCQ can't be enabled lkhelp
2003-05-10 16:53 ` 2.5.69, IDE TCQ can't be enabled *RESOLVED* lkhelp
2003-05-10 17:26 ` Rob Ekl
2003-05-12 12:46 ` 2.5.69, IDE TCQ can't be enabled Oleg Drokin
2003-05-12 12:55 ` Oliver Neukum
2003-05-12 13:16 ` Bartlomiej Zolnierkiewicz
2003-05-12 13:12 ` Alan Cox
2003-05-13 15:39 ` Jens Axboe
2003-05-12 13:22 ` Oleg Drokin
2003-05-12 13:23 ` Jens Axboe [this message]
2003-05-12 13:35 ` Jeff Garzik
2003-05-12 13:30 ` Bartlomiej Zolnierkiewicz
2003-05-12 13:22 ` Jens Axboe
2003-05-13 15:32 ` Jens Axboe
2003-05-13 17:25 ` Oliver Neukum
2003-05-13 17:28 ` Jens Axboe
2003-05-13 18:46 ` Oliver Neukum
2003-05-13 19:06 ` Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2003-05-12 17:58 Mudama, Eric
2003-05-12 18:59 ` Jens Axboe
2003-05-12 19:42 ` Jeff Garzik
2003-05-12 19:19 Mudama, Eric
2003-05-12 19:35 ` Jeff Garzik
2003-05-12 19:42 ` Jens Axboe
2003-05-12 19:44 ` Jens Axboe
2003-05-12 19:53 ` Jeff Garzik
2003-05-13 6:40 ` Jens Axboe
2003-05-13 18:00 ` Dave Jones
2003-05-13 18:03 ` Jens Axboe
2003-05-13 18:05 ` Jeff Garzik
2003-05-13 18:06 ` Jens Axboe
2003-05-13 18:13 ` Jens Axboe
2003-05-13 18:42 ` Jeff Garzik
2003-05-13 20:29 ` Andre Hedrick
2003-05-14 7:04 ` Jens Axboe
2003-05-14 7:15 ` Jens Axboe
2003-05-13 20:03 ` Andre Hedrick
2003-05-13 22:55 ` Alan Cox
2003-05-13 18:03 ` Jeff Garzik
2003-05-14 13:30 ` Henning P. Schmiedehausen
2003-05-12 22:36 ` Christer Weinigel
2003-05-13 6:41 ` Jens Axboe
2003-05-13 20:04 ` Bill Davidsen
2003-05-13 20:28 Mudama, Eric
2003-05-13 20:31 Mudama, Eric
2003-05-13 20:34 ` Andre Hedrick
2003-05-13 20:43 Mudama, Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030512132330.GB17033@suse.de \
--to=axboe@suse.de \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=green@namesys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkhelp@rekl.yi.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox