From: Alex Riesen <alexander.riesen@synopsys.COM>
To: linux-kernel@vger.kernel.org
Cc: Zwane Mwaikambo <zwane@linuxpower.ca>, Jeff Garzik <jgarzik@pobox.com>
Subject: 2.5.69+bk: "irq 15: nobody cared!" on a Compaq Armada 1592DT
Date: Tue, 13 May 2003 15:49:07 +0200 [thread overview]
Message-ID: <20030513134907.GF32559@Synopsys.COM> (raw)
Hi!
(Zwane, I saw you fixing a similar bug in xircom, so included
you in cc also. Maybe you have an idea what could I try first?)
This occured just after starting pcmcia, when booted with a
card already in slot and cable connected to it.
The traces didn't stop until i removed the card
(i tried to disconnect the cable first, which didn't help).
-alex
$ lsmod
Module Size Used by
pcnet_cs 16100 1
8390 8384 1 pcnet_cs
crc32 3744 1 8390
ds 11616 3 pcnet_cs
yenta_socket 14240 2
pcmcia_core 53888 3 pcnet_cs,ds,yenta_socket
soundcore 6560 0
$ lspci | grep CardBus
00:11.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:11.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
$ grep PCMCIA .config
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
# PCMCIA/CardBus support
CONFIG_PCMCIA=m
CONFIG_PCMCIA_PROBE=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# PCMCIA SCSI adapter support
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# PCMCIA network device support
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_PCMCIA_AXNET is not set
# PCMCIA character devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 15 for device 00:11.0
irq 15: nobody cared!
Call Trace:
[<c010a8fb>] handle_IRQ_event+0x7b/0xf0
[<c010ab39>] do_IRQ+0xa9/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c01a4355>] pci_bus_write_config_word+0x55/0x70
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1eeb1>] yenta_probe_irq+0xb1/0x120 [yenta_socket]
[<c6a1ed60>] yenta_interrupt+0x0/0x60 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1ef49>] yenta_get_socket_capabilities+0x29/0x50 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1fa6e>] yenta_open+0x12e/0x180 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20ff4>] +0x94/0x840 [yenta_socket]
[<c6a1e316>] add_pci_socket+0xa6/0xe0 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c6a1e391>] cardbus_probe+0x31/0x40 [yenta_socket]
[<c6a20e40>] yenta_operations+0x0/0x40 [yenta_socket]
[<c01a7555>] pci_device_probe+0x45/0x60
[<c6a20b80>] cardbus_table+0x0/0x40 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf675>] bus_match+0x35/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf768>] driver_attach+0x58/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20c10>] pci_cardbus_driver+0x50/0xa0 [yenta_socket]
[<c01cf9f6>] bus_add_driver+0x96/0xb0
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20e80>] +0x0/0xe0 [yenta_socket]
[<c01cfe1f>] driver_register+0x2f/0x40
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01a765e>] pci_register_driver+0x3e/0x50
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a1200d>] +0xd/0x11 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c012f015>] sys_init_module+0x135/0x280
[<c0109187>] syscall_call+0x7/0xb
handlers:
[<c6a1ed60>] (yenta_interrupt+0x0/0x60 [yenta_socket])
irq 15: nobody cared!
Call Trace:
[<c010a8fb>] handle_IRQ_event+0x7b/0xf0
[<c010ab39>] do_IRQ+0xa9/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c011e827>] do_softirq+0x47/0xb0
[<c010abb5>] do_IRQ+0x125/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c01a4355>] pci_bus_write_config_word+0x55/0x70
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1eeb1>] yenta_probe_irq+0xb1/0x120 [yenta_socket]
[<c6a1ed60>] yenta_interrupt+0x0/0x60 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1ef49>] yenta_get_socket_capabilities+0x29/0x50 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1fa6e>] yenta_open+0x12e/0x180 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20ff4>] +0x94/0x840 [yenta_socket]
[<c6a1e316>] add_pci_socket+0xa6/0xe0 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c6a1e391>] cardbus_probe+0x31/0x40 [yenta_socket]
[<c6a20e40>] yenta_operations+0x0/0x40 [yenta_socket]
[<c01a7555>] pci_device_probe+0x45/0x60
[<c6a20b80>] cardbus_table+0x0/0x40 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf675>] bus_match+0x35/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf768>] driver_attach+0x58/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20c10>] pci_cardbus_driver+0x50/0xa0 [yenta_socket]
[<c01cf9f6>] bus_add_driver+0x96/0xb0
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20e80>] +0x0/0xe0 [yenta_socket]
[<c01cfe1f>] driver_register+0x2f/0x40
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01a765e>] pci_register_driver+0x3e/0x50
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a1200d>] +0xd/0x11 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c012f015>] sys_init_module+0x135/0x280
[<c0109187>] syscall_call+0x7/0xb
next reply other threads:[~2003-05-13 13:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-13 13:49 Alex Riesen [this message]
2003-05-13 18:23 ` 2.5.69+bk: "irq 15: nobody cared!" on a Compaq Armada 1592DT Zwane Mwaikambo
2003-05-14 0:00 ` Andrew Morton
2003-05-14 9:34 ` Russell King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030513134907.GF32559@Synopsys.COM \
--to=alexander.riesen@synopsys.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zwane@linuxpower.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox