From: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
To: chas williams <chas@cmf.nrl.navy.mil>
Cc: davem@redhat.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH][ATM] assorted he driver cleanup
Date: Thu, 29 May 2003 13:21:26 -0300 [thread overview]
Message-ID: <20030529162125.GU24054@conectiva.com.br> (raw)
In-Reply-To: <200305291609.h4TG9rx01188@relax.cmf.nrl.navy.mil>
Em Thu, May 29, 2003 at 12:09:54PM -0400, chas williams escreveu:
> the three following changesets attempt to bring the he atm
> driver into conformance with the accepted linux coding style,
> fix some chattiness the irq handler, and address the stack
> usage issue in he_init_cs_block_rcm().
great, comments below
>
> # This is a BitKeeper generated patch for the following project:
> # Project Name: Linux kernel tree
> # This patch format is intended for GNU patch command version 2.5 or higher.
> # This patch includes the following deltas:
> # ChangeSet 1.1158 -> 1.1159
> # drivers/atm/he.c 1.7 -> 1.8
> #
> # The following is the BitKeeper ChangeSet Log
> # --------------------------------------------
> # 03/05/23 chas@relax.cmf.nrl.navy.mil 1.1159
> # he coding style conformance
> # --------------------------------------------
> #
> diff -Nru a/drivers/atm/he.c b/drivers/atm/he.c
> --- a/drivers/atm/he.c Thu May 29 11:48:40 2003
> +++ b/drivers/atm/he.c Thu May 29 11:48:40 2003
> @@ -132,9 +132,9 @@
>
> #undef DEBUG
> #ifdef DEBUG
> -#define HPRINTK(fmt,args...) hprintk(fmt,args)
> +#define HPRINTK(fmt,args...) printk(KERN_DEBUG DEV_LABEL "%d: " fmt, he_dev->number , ##args)
> #else
> -#define HPRINTK(fmt,args...) do { } while(0)
> +#define HPRINTK(fmt,args...) do { } while (0)
> #endif /* DEBUG */
>
>
> @@ -179,9 +179,7 @@
> phy_put: he_phy_put,
> phy_get: he_phy_get,
> proc_read: he_proc_read,
> -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
> owner: THIS_MODULE
> -#endif
> };
>
> /* see the comments in he.h about global_lock */
> @@ -189,7 +187,7 @@
> #define HE_SPIN_LOCK(dev, flags) spin_lock_irqsave(&(dev)->global_lock, flags)
> #define HE_SPIN_UNLOCK(dev, flags) spin_unlock_irqrestore(&(dev)->global_lock, flags)
Is the above really needed?
> -#define he_writel(dev, val, reg) do { writel(val, (dev)->membase + (reg)); wmb(); } while(0)
> +#define he_writel(dev, val, reg) do { writel(val, (dev)->membase + (reg)); wmb(); } while (0)
> #define he_readl(dev, reg) readl((dev)->membase + (reg))
>
> /* section 2.12 connection memory access */
> @@ -203,7 +201,7 @@
> (void) he_readl(he_dev, CON_DAT);
> #endif
> he_writel(he_dev, flags | CON_CTL_WRITE | CON_CTL_ADDR(addr), CON_CTL);
> - while(he_readl(he_dev, CON_CTL) & CON_CTL_BUSY);
> + while (he_readl(he_dev, CON_CTL) & CON_CTL_BUSY);
> }
>
> #define he_writel_rcm(dev, val, reg) \
> @@ -219,7 +217,7 @@
> he_readl_internal(struct he_dev *he_dev, unsigned addr, unsigned flags)
> {
> he_writel(he_dev, flags | CON_CTL_READ | CON_CTL_ADDR(addr), CON_CTL);
> - while(he_readl(he_dev, CON_CTL) & CON_CTL_BUSY);
> + while (he_readl(he_dev, CON_CTL) & CON_CTL_BUSY);
> return he_readl(he_dev, CON_DAT);
> }
>
> @@ -374,7 +372,8 @@
>
> printk(KERN_INFO "he: %s\n", version);
>
> - if (pci_enable_device(pci_dev)) return -EIO;
> + if (pci_enable_device(pci_dev))
> + return -EIO;
> if (pci_set_dma_mask(pci_dev, HE_DMA_MASK) != 0) {
> printk(KERN_WARNING "he: no suitable dma available\n");
> err = -EIO;
> @@ -407,7 +406,8 @@
> goto init_one_failure;
> }
> he_dev->next = NULL;
> - if (he_devs) he_dev->next = he_devs;
> + if (he_devs)
> + he_dev->next = he_devs;
> he_devs = he_dev;
> return 0;
>
> @@ -447,11 +447,11 @@
>
> unsigned exp = 0;
>
> - if (rate == 0) return(0);
> + if (rate == 0)
> + return(0);
return is not a function, so 'return 0;' is the preferred style
>
> rate <<= 9;
> - while (rate > 0x3ff)
> - {
> + while (rate > 0x3ff) {
> ++exp;
> rate >>= 1;
> }
> @@ -472,16 +472,14 @@
>
> he_writel(he_dev, lbufd_index, RLBF0_H);
>
> - for (i = 0, lbuf_count = 0; i < he_dev->r0_numbuffs; ++i)
> - {
> + for (i = 0, lbuf_count = 0; i < he_dev->r0_numbuffs; ++i) {
> lbufd_index += 2;
> lbuf_addr = (row_offset + (lbuf_count * lbuf_bufsize)) / 32;
>
> he_writel_rcm(he_dev, lbuf_addr, lbm_offset);
> he_writel_rcm(he_dev, lbufd_index, lbm_offset + 1);
>
> - if (++lbuf_count == lbufs_per_row)
> - {
> + if (++lbuf_count == lbufs_per_row) {
> lbuf_count = 0;
> row_offset += he_dev->bytes_per_row;
> }
> @@ -505,16 +503,14 @@
>
> he_writel(he_dev, lbufd_index, RLBF1_H);
>
> - for (i = 0, lbuf_count = 0; i < he_dev->r1_numbuffs; ++i)
> - {
> + for (i = 0, lbuf_count = 0; i < he_dev->r1_numbuffs; ++i) {
> lbufd_index += 2;
> lbuf_addr = (row_offset + (lbuf_count * lbuf_bufsize)) / 32;
>
> he_writel_rcm(he_dev, lbuf_addr, lbm_offset);
> he_writel_rcm(he_dev, lbufd_index, lbm_offset + 1);
>
> - if (++lbuf_count == lbufs_per_row)
> - {
> + if (++lbuf_count == lbufs_per_row) {
> lbuf_count = 0;
> row_offset += he_dev->bytes_per_row;
> }
> @@ -538,16 +534,14 @@
>
> he_writel(he_dev, lbufd_index, TLBF_H);
>
> - for (i = 0, lbuf_count = 0; i < he_dev->tx_numbuffs; ++i)
> - {
> + for (i = 0, lbuf_count = 0; i < he_dev->tx_numbuffs; ++i) {
> lbufd_index += 1;
> lbuf_addr = (row_offset + (lbuf_count * lbuf_bufsize)) / 32;
>
> he_writel_rcm(he_dev, lbuf_addr, lbm_offset);
> he_writel_rcm(he_dev, lbufd_index, lbm_offset + 1);
>
> - if (++lbuf_count == lbufs_per_row)
> - {
> + if (++lbuf_count == lbufs_per_row) {
> lbuf_count = 0;
> row_offset += he_dev->bytes_per_row;
> }
> @@ -562,8 +556,7 @@
> {
> he_dev->tpdrq_base = pci_alloc_consistent(he_dev->pci_dev,
> CONFIG_TPDRQ_SIZE * sizeof(struct he_tpdrq), &he_dev->tpdrq_phys);
> - if (he_dev->tpdrq_base == NULL)
> - {
> + if (he_dev->tpdrq_base == NULL) {
> hprintk("failed to alloc tpdrq\n");
> return -ENOMEM;
> }
> @@ -588,7 +581,7 @@
>
> /* 5.1.7 cs block initialization */
>
> - for(reg = 0; reg < 0x20; ++reg)
> + for (reg = 0; reg < 0x20; ++reg)
> he_writel_mbox(he_dev, 0x0, CS_STTIM0 + reg);
>
> /* rate grid timer reload values */
> @@ -597,8 +590,7 @@
> rate = he_dev->atm_dev->link_rate;
> delta = rate / 16 / 2;
>
> - for(reg = 0; reg < 0x10; ++reg)
> - {
> + for (reg = 0; reg < 0x10; ++reg) {
> /* 2.4 internal transmit function
> *
> * we initialize the first row in the rate grid.
> @@ -610,8 +602,7 @@
> rate -= delta;
> }
>
> - if (he_is622(he_dev))
> - {
> + if (he_is622(he_dev)) {
> /* table 5.2 (4 cells per lbuf) */
> he_writel_mbox(he_dev, 0x000800fa, CS_ERTHR0);
> he_writel_mbox(he_dev, 0x000c33cb, CS_ERTHR1);
> @@ -640,9 +631,7 @@
> /* table 5.9 */
> he_writel_mbox(he_dev, 0x5, CS_OTPPER);
> he_writel_mbox(he_dev, 0x14, CS_OTWPER);
> - }
> - else
> - {
> + } else {
> /* table 5.1 (4 cells per lbuf) */
> he_writel_mbox(he_dev, 0x000400ea, CS_ERTHR0);
> he_writel_mbox(he_dev, 0x00063388, CS_ERTHR1);
> @@ -671,12 +660,11 @@
> /* table 5.9 */
> he_writel_mbox(he_dev, 0x6, CS_OTPPER);
> he_writel_mbox(he_dev, 0x1e, CS_OTWPER);
> -
> }
>
> he_writel_mbox(he_dev, 0x8, CS_OTTLIM);
>
> - for(reg = 0; reg < 0x8; ++reg)
> + for (reg = 0; reg < 0x8; ++reg)
> he_writel_mbox(he_dev, 0x0, CS_HGRRT0 + reg);
>
> }
> @@ -720,8 +708,7 @@
> * in order to construct the rate to group table below
> */
>
> - for (j = 0; j < 16; j++)
> - {
> + for (j = 0; j < 16; j++) {
> rategrid[0][j] = rate;
> rate -= delta;
> }
> @@ -742,8 +729,7 @@
> */
>
> rate_atmf = 0;
> - while (rate_atmf < 0x400)
> - {
> + while (rate_atmf < 0x400) {
> man = (rate_atmf & 0x1f) << 4;
> exp = rate_atmf >> 5;
>
> @@ -753,12 +739,12 @@
> */
> rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
>
> - if (rate_cps < 10) rate_cps = 10;
> - /* 2.2.1 minimum payload rate is 10 cps */
> + if (rate_cps < 10)
> + rate_cps = 10; /* 2.2.1 minimum payload rate is 10 cps */
>
> for (i = 255; i > 0; i--)
> - if (rategrid[i/16][i%16] >= rate_cps) break;
> - /* pick nearest rate instead? */
> + if (rategrid[i/16][i%16] >= rate_cps)
> + break; /* pick nearest rate instead? */
>
> /*
> * each table entry is 16 bits: (rate grid index (8 bits)
> @@ -773,12 +759,17 @@
> /* this is pretty, but avoids _divdu3 and is mostly correct */
> buf = 0;
> mult = he_dev->atm_dev->link_rate / ATM_OC3_PCR;
> - if (rate_cps > (68 * mult)) buf = 1;
> - if (rate_cps > (136 * mult)) buf = 2;
> - if (rate_cps > (204 * mult)) buf = 3;
> - if (rate_cps > (272 * mult)) buf = 4;
> + if (rate_cps > (68 * mult))
> + buf = 1;
> + if (rate_cps > (136 * mult))
> + buf = 2;
> + if (rate_cps > (204 * mult))
> + buf = 3;
> + if (rate_cps > (272 * mult))
> + buf = 4;
> #endif
> - if (buf > buf_limit) buf = buf_limit;
> + if (buf > buf_limit)
> + buf = buf_limit;
> reg = (reg<<16) | ((i<<8) | buf);
>
> #define RTGTBL_OFFSET 0x400
> @@ -801,8 +792,7 @@
> #ifdef USE_RBPS_POOL
> he_dev->rbps_pool = pci_pool_create("rbps", he_dev->pci_dev,
> CONFIG_RBPS_BUFSIZE, 8, 0);
> - if (he_dev->rbps_pool == NULL)
> - {
> + if (he_dev->rbps_pool == NULL) {
> hprintk("unable to create rbps pages\n");
> return -ENOMEM;
> }
> @@ -817,16 +807,14 @@
>
> he_dev->rbps_base = pci_alloc_consistent(he_dev->pci_dev,
> CONFIG_RBPS_SIZE * sizeof(struct he_rbp), &he_dev->rbps_phys);
> - if (he_dev->rbps_base == NULL)
> - {
> + if (he_dev->rbps_base == NULL) {
> hprintk("failed to alloc rbps\n");
> return -ENOMEM;
> }
> memset(he_dev->rbps_base, 0, CONFIG_RBPS_SIZE * sizeof(struct he_rbp));
> he_dev->rbps_virt = kmalloc(CONFIG_RBPS_SIZE * sizeof(struct he_virt), GFP_KERNEL);
>
> - for (i = 0; i < CONFIG_RBPS_SIZE; ++i)
> - {
> + for (i = 0; i < CONFIG_RBPS_SIZE; ++i) {
> dma_addr_t dma_handle;
> void *cpuaddr;
>
> @@ -868,16 +856,14 @@
> #ifdef USE_RBPL_POOL
> he_dev->rbpl_pool = pci_pool_create("rbpl", he_dev->pci_dev,
> CONFIG_RBPL_BUFSIZE, 8, 0);
> - if (he_dev->rbpl_pool == NULL)
> - {
> + if (he_dev->rbpl_pool == NULL) {
> hprintk("unable to create rbpl pool\n");
> return -ENOMEM;
> }
> #else /* !USE_RBPL_POOL */
> he_dev->rbpl_pages = (void *) pci_alloc_consistent(he_dev->pci_dev,
> CONFIG_RBPL_SIZE * CONFIG_RBPL_BUFSIZE, &he_dev->rbpl_pages_phys);
> - if (he_dev->rbpl_pages == NULL)
> - {
> + if (he_dev->rbpl_pages == NULL) {
> hprintk("unable to create rbpl pages\n");
> return -ENOMEM;
> }
> @@ -885,16 +871,14 @@
>
> he_dev->rbpl_base = pci_alloc_consistent(he_dev->pci_dev,
> CONFIG_RBPL_SIZE * sizeof(struct he_rbp), &he_dev->rbpl_phys);
> - if (he_dev->rbpl_base == NULL)
> - {
> + if (he_dev->rbpl_base == NULL) {
> hprintk("failed to alloc rbpl\n");
> return -ENOMEM;
> }
> memset(he_dev->rbpl_base, 0, CONFIG_RBPL_SIZE * sizeof(struct he_rbp));
> he_dev->rbpl_virt = kmalloc(CONFIG_RBPL_SIZE * sizeof(struct he_virt), GFP_KERNEL);
>
> - for (i = 0; i < CONFIG_RBPL_SIZE; ++i)
> - {
> + for (i = 0; i < CONFIG_RBPL_SIZE; ++i) {
> dma_addr_t dma_handle;
> void *cpuaddr;
>
> @@ -910,7 +894,6 @@
> he_dev->rbpl_virt[i].virt = cpuaddr;
> he_dev->rbpl_base[i].status = RBP_LOANED | (i << RBP_INDEX_OFF);
> he_dev->rbpl_base[i].phys = dma_handle;
> -
> }
> he_dev->rbpl_tail = &he_dev->rbpl_base[CONFIG_RBPL_SIZE-1];
>
> @@ -929,8 +912,7 @@
>
> he_dev->rbrq_base = pci_alloc_consistent(he_dev->pci_dev,
> CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), &he_dev->rbrq_phys);
> - if (he_dev->rbrq_base == NULL)
> - {
> + if (he_dev->rbrq_base == NULL) {
> hprintk("failed to allocate rbrq\n");
> return -ENOMEM;
> }
> @@ -942,13 +924,11 @@
> he_writel(he_dev,
> RBRQ_THRESH(CONFIG_RBRQ_THRESH) | RBRQ_SIZE(CONFIG_RBRQ_SIZE-1),
> G0_RBRQ_Q + (group * 16));
> - if (irq_coalesce)
> - {
> + if (irq_coalesce) {
> hprintk("coalescing interrupts\n");
> he_writel(he_dev, RBRQ_TIME(768) | RBRQ_COUNT(7),
> G0_RBRQ_I + (group * 16));
> - }
> - else
> + } else
> he_writel(he_dev, RBRQ_TIME(0) | RBRQ_COUNT(1),
> G0_RBRQ_I + (group * 16));
>
> @@ -956,8 +936,7 @@
>
> he_dev->tbrq_base = pci_alloc_consistent(he_dev->pci_dev,
> CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), &he_dev->tbrq_phys);
> - if (he_dev->tbrq_base == NULL)
> - {
> + if (he_dev->tbrq_base == NULL) {
> hprintk("failed to allocate tbrq\n");
> return -ENOMEM;
> }
> @@ -983,8 +962,7 @@
>
> he_dev->irq_base = pci_alloc_consistent(he_dev->pci_dev,
> (CONFIG_IRQ_SIZE+1) * sizeof(struct he_irq), &he_dev->irq_phys);
> - if (he_dev->irq_base == NULL)
> - {
> + if (he_dev->irq_base == NULL) {
> hprintk("failed to allocate irq\n");
> return -ENOMEM;
> }
> @@ -994,7 +972,7 @@
> he_dev->irq_head = he_dev->irq_base;
> he_dev->irq_tail = he_dev->irq_base;
>
> - for(i=0; i < CONFIG_IRQ_SIZE; ++i)
> + for (i=0; i < CONFIG_IRQ_SIZE; ++i)
use spaces before and after basic operators
for (i = 0; i < CONFIG_IRQ_SIZE; ++i)
> he_dev->irq_base[i].isw = ITYPE_INVALID;
>
> he_writel(he_dev, he_dev->irq_phys, IRQ0_BASE);
> @@ -1026,8 +1004,7 @@
> he_writel(he_dev, 0x0, GRP_54_MAP);
> he_writel(he_dev, 0x0, GRP_76_MAP);
>
> - if (request_irq(he_dev->pci_dev->irq, he_irq_handler, SA_INTERRUPT|SA_SHIRQ, DEV_LABEL, he_dev))
> - {
> + if (request_irq(he_dev->pci_dev->irq, he_irq_handler, SA_INTERRUPT|SA_SHIRQ, DEV_LABEL, he_dev)) {
> hprintk("irq %d already in use\n", he_dev->pci_dev->irq);
> return -EINVAL;
> }
> @@ -1067,46 +1044,39 @@
> */
>
> /* 4.3 pci bus controller-specific initialization */
> - if (pci_read_config_dword(pci_dev, GEN_CNTL_0, &gen_cntl_0) != 0)
> - {
> + if (pci_read_config_dword(pci_dev, GEN_CNTL_0, &gen_cntl_0) != 0) {
> hprintk("can't read GEN_CNTL_0\n");
Humm, shouldn't we release the irq here? What about using gotos for exception
handing?
> return -EINVAL;
> }
> gen_cntl_0 |= (MRL_ENB | MRM_ENB | IGNORE_TIMEOUT);
> - if (pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0) != 0)
> - {
> + if (pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0) != 0) {
> hprintk("can't write GEN_CNTL_0.\n");
ditto
> return -EINVAL;
> }
>
> - if (pci_read_config_word(pci_dev, PCI_COMMAND, &command) != 0)
> - {
> + if (pci_read_config_word(pci_dev, PCI_COMMAND, &command) != 0) {
> hprintk("can't read PCI_COMMAND.\n");
ditto
> return -EINVAL;
> }
>
> command |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE);
> - if (pci_write_config_word(pci_dev, PCI_COMMAND, command) != 0)
> - {
> + if (pci_write_config_word(pci_dev, PCI_COMMAND, command) != 0) {
> hprintk("can't enable memory.\n");
ditto
> return -EINVAL;
> }
>
> - if (pci_read_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, &cache_size))
> - {
> + if (pci_read_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, &cache_size)) {
> hprintk("can't read cache line size?\n");
ditto
> return -EINVAL;
> }
>
> - if (cache_size < 16)
> - {
> + if (cache_size < 16) {
> cache_size = 16;
> if (pci_write_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, cache_size))
> hprintk("can't set cache line size to %d\n", cache_size);
> }
>
> - if (pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &timer))
> - {
> + if (pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &timer)) {
> hprintk("can't read latency timer?\n");
ditto
I'll stop here :-)
next prev parent reply other threads:[~2003-05-29 16:08 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-29 16:09 [PATCH][ATM] assorted he driver cleanup chas williams
2003-05-29 16:19 ` Christoph Hellwig
2003-05-29 16:32 ` chas williams
2003-05-29 16:21 ` Arnaldo Carvalho de Melo [this message]
2003-05-29 16:31 ` chas williams
2003-05-29 17:06 ` Arnaldo Carvalho de Melo
2003-05-29 17:12 ` chas williams
2003-05-29 17:36 ` Arnaldo Carvalho de Melo
2003-06-01 18:57 ` chas williams
2003-06-01 20:00 ` Alan Cox
2003-06-01 22:58 ` chas williams
2003-06-02 1:42 ` David S. Miller
2003-06-02 1:47 ` Arnaldo Carvalho de Melo
2003-06-02 2:34 ` chas williams
2003-06-02 13:50 ` Alan Cox
2003-06-02 1:32 ` David S. Miller
2003-05-29 18:08 ` chas williams
2003-05-29 18:34 ` Arnaldo Carvalho de Melo
2003-05-30 3:01 ` David S. Miller
2003-05-30 8:57 ` Dave Jones
2003-05-30 13:36 ` Jeff Garzik
2003-05-30 13:46 ` chas williams
2003-05-30 14:00 ` chas williams
[not found] ` <200305301431.h4UEVesG003572@ginger.cmf.nrl.navy.mil>
2003-06-04 4:51 ` David S. Miller
2003-06-01 22:42 ` Francois Romieu
2003-06-18 21:08 ` chas williams
2003-06-19 1:05 ` David S. Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030529162125.GU24054@conectiva.com.br \
--to=acme@conectiva.com.br \
--cc=chas@cmf.nrl.navy.mil \
--cc=davem@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox