* Re: readcd with 2.5 kernels and ide-cd
[not found] ` <fa.cqhesj4.p2oeoc@ifi.uio.no>
@ 2003-05-29 21:43 ` Andy Polyakov
2003-05-30 6:48 ` Jens Axboe
0 siblings, 1 reply; 5+ messages in thread
From: Andy Polyakov @ 2003-05-29 21:43 UTC (permalink / raw)
To: Jens Axboe; +Cc: Markus Plail, linux-kernel
> > Is there work going on to get readcd working with 2.5 kernels and
> > ide-cd (without ide-scsi)?
> >
> > strace readcd dev=/dev/dvd f=/dev/null
> > ...
> > ioctl(4, SNDCTL_TMR_TIMEBASE, 0xbfffedd8) = -1 ENOTTY (Inappropriate ioctl for device)
> > ...
> > ioctl(3, 0x2285, 0xbfffef9c) = -1 ENOTTY (Inappropriate ioctl for device)
>
> Something _very_ fishy is going on there.
Nothing fishy, nothing at all... It's as simple as
driver/block/scsi_ioctl.c doesn't accepts requestes larger than 64KB,
while readcd asks for 256KB.
> 0x2285 is the SG_IO ioctl.
sg_io returns EINVAL (line 163), but driver/block/ioctl.c transforms it
to ENOTTY (see last 8 lines).
> First call to it completes, second one returns -ENOTTY. Looks very much
> like some kernel bug, see the SNDCTL_TMR_TIMEBASE ioctl returning
> -ENOTTY in-between.
SNDCTL_TMR_TIMEBASE is actually TCGETS, originates in stdio and is not
relevant.
> I've seen this before (this very bug), but haven't chased it down.
It's not a bug, but implementation deficiency. Cheers. A.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: readcd with 2.5 kernels and ide-cd
2003-05-29 21:43 ` readcd with 2.5 kernels and ide-cd Andy Polyakov
@ 2003-05-30 6:48 ` Jens Axboe
0 siblings, 0 replies; 5+ messages in thread
From: Jens Axboe @ 2003-05-30 6:48 UTC (permalink / raw)
To: Andy Polyakov; +Cc: Markus Plail, linux-kernel
On Thu, May 29 2003, Andy Polyakov wrote:
> > > Is there work going on to get readcd working with 2.5 kernels and
> > > ide-cd (without ide-scsi)?
> > >
> > > strace readcd dev=/dev/dvd f=/dev/null
> > > ...
> > > ioctl(4, SNDCTL_TMR_TIMEBASE, 0xbfffedd8) = -1 ENOTTY (Inappropriate ioctl for device)
> > > ...
> > > ioctl(3, 0x2285, 0xbfffef9c) = -1 ENOTTY (Inappropriate ioctl for device)
> >
> > Something _very_ fishy is going on there.
>
> Nothing fishy, nothing at all... It's as simple as
> driver/block/scsi_ioctl.c doesn't accepts requestes larger than 64KB,
> while readcd asks for 256KB.
Hmm you are right, well we can increase that without any problems. For
bio transfers at least, kmalloc() runs into problems much beyond that.
But for larger transfers, they better be aligned.
> > 0x2285 is the SG_IO ioctl.
>
> sg_io returns EINVAL (line 163), but driver/block/ioctl.c transforms it
> to ENOTTY (see last 8 lines).
Ah, so that is the bug.
> > First call to it completes, second one returns -ENOTTY. Looks very much
> > like some kernel bug, see the SNDCTL_TMR_TIMEBASE ioctl returning
> > -ENOTTY in-between.
>
> SNDCTL_TMR_TIMEBASE is actually TCGETS, originates in stdio and is not
> relevant.
Well yes it's resolved incorrectly, the line was the interesting part.
The -ENOTTY was the interesting part, but no not relevant.
--
Jens Axboe
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: readcd with 2.5 kernels and ide-cd
@ 2003-05-30 0:11 Douglas Gilbert
0 siblings, 0 replies; 5+ messages in thread
From: Douglas Gilbert @ 2003-05-30 0:11 UTC (permalink / raw)
To: linux-kernel; +Cc: appro
Andy Polyakov wrote:
> Nothing fishy, nothing at all... It's as simple as
> driver/block/scsi_ioctl.c doesn't accepts requestes
> larger than 64KB, while readcd asks for 256KB.
Yes, that 64KB should be increased. The sg driver
allows up to 255 * 32 KB (just less than 8MB). From
memory cdparanoia uses a 128 KB packet size.
cdrecord uses 63 KB so it gets through.
> > 0x2285 is the SG_IO ioctl.
> sg_io returns EINVAL (line 163), but driver/block/ioctl.c
> transforms it to ENOTTY (see last 8 lines).
That is unhelpful. Is there a good reason for that?
I plan to get working on the SG_IO ioctl in the block
layer shortly. Andy has a patch to address the units
of the command timeout. sg's iovec may map simply as
well (maybe it won't either).
Doug Gilbert
^ permalink raw reply [flat|nested] 5+ messages in thread
* readcd with 2.5 kernels and ide-cd
@ 2003-05-29 16:44 Markus Plail
2003-05-29 17:30 ` Jens Axboe
0 siblings, 1 reply; 5+ messages in thread
From: Markus Plail @ 2003-05-29 16:44 UTC (permalink / raw)
To: linux-kernel
Hi there!
Is there work going on to get readcd working with 2.5 kernels and
ide-cd (without ide-scsi)?
regards
Markus
That's what i get:
[18:41:23]-[Thu May 29]-[~]
[plail@plailis_lfs]strace readcd dev=/dev/dvd f=/dev/null
execve("/opt/schily/bin/readcd", ["readcd", "dev=/dev/dvd", "f=/dev/null"], [/* 52 vars */]) = 0
brk(0) = 0x806a000
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=66034, ...}) = 0
old_mmap(NULL, 66034, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40017000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\10\332"..., 1024) = 1024
fstat64(3, {st_mode=S_IFREG|0755, st_size=5021367, ...}) = 0
old_mmap(NULL, 1215588, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40028000
mprotect(0x40146000, 44132, PROT_NONE) = 0
old_mmap(0x40146000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x11d000) = 0x40146000
old_mmap(0x4014d000, 15460, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4014d000
close(3) = 0
munmap(0x40017000, 66034) = 0
brk(0) = 0x806a000
brk(0x806a0a8) = 0x806a0a8
brk(0x806b000) = 0x806b000
brk(0x806d000) = 0x806d000
open("/dev/dvd", O_RDWR|O_NONBLOCK) = 3
fcntl64(3, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
fcntl64(3, F_SETFL, O_RDWR|O_LARGEFILE) = 0
ioctl(3, 0x5382, 0xbffff174) = 0
...
....[snip].....
...
gettimeofday({1054226509, 647460}, NULL) = 0
ioctl(3, 0x2285, 0xbfffeecc) = 0
gettimeofday({1054226509, 648266}, NULL) = 0
gettimeofday({1054226509, 648420}, NULL) = 0
ioctl(3, 0x2285, 0xbfffed4c) = 0
gettimeofday({1054226509, 650263}, NULL) = 0
gettimeofday({1054226509, 650414}, NULL) = 0
ioctl(3, 0x2285, 0xbfffeffc) = 0
gettimeofday({1054226509, 651217}, NULL) = 0
gettimeofday({1054226509, 651359}, NULL) = 0
ioctl(3, 0x2285, 0xbfffee9c) = 0
gettimeofday({1054226509, 653212}, NULL) = 0
write(2, "Read speed: 8467 kB/s (CD 48x"..., 44Read speed: 8467 kB/s (CD 48x, DVD 6x).
) = 44
write(2, "Write speed: 0 kB/s (CD 0x"..., 44Write speed: 0 kB/s (CD 0x, DVD 0x).
) = 44
rt_sigaction(SIGINT, {0x8049d48, [INT], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x8049d48, [TERM], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
gettimeofday({1054226509, 660589}, NULL) = 0
ioctl(3, 0x2285, 0xbffff29c) = 0
gettimeofday({1054226509, 661587}, NULL) = 0
gettimeofday({1054226509, 661733}, NULL) = 0
ioctl(3, 0x2285, 0xbffff26c) = 0
gettimeofday({1054226509, 662943}, NULL) = 0
write(2, "Capacity: 2246704 Blocks = 44934"..., 68Capacity: 2246704 Blocks = 4493408 kBytes = 4388 MBytes = 4601 prMB
) = 68
write(2, "Sectorsize: 2048 Bytes\n", 23Sectorsize: 2048 Bytes
) = 23
gettimeofday({1054226509, 663619}, NULL) = 0
ioctl(3, 0x2285, 0xbfffefec) = 0
gettimeofday({1054226509, 664867}, NULL) = 0
write(2, "Copy from SCSI (0,0,0) disk to f"..., 48Copy from SCSI (0,0,0) disk to file '/dev/null'
) = 48
open("/dev/null", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0666) = 4
fcntl64(4, F_GETFL) = 0x8001 (flags O_WRONLY|O_LARGEFILE)
fstat64(4, {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0
ioctl(4, SNDCTL_TMR_TIMEBASE, 0xbfffedd8) = -1 ENOTTY (Inappropriate ioctl for device)
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000
_llseek(4, 0, [0], SEEK_CUR) = 0
munmap(0x40017000, 4096) = 0
write(2, "end: 2246704\n", 15end: 2246704
) = 15
gettimeofday({1054226509, 666723}, NULL) = 0
) = 242, "addr: 0 cnt: 128\r", 24addr: 0 cnt: 128
gettimeofday({1054226509, 667029}, NULL) = 0
ioctl(3, 0x2285, 0xbfffef9c) = -1 ENOTTY (Inappropriate ioctl for device)
write(3, ".\0\0\0$\0\4\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 46) = -1 EPERM (Operation not permitted)
ioctl(3, 0x2201, 0xbfff6ee8) = 0
gettimeofday({1054226509, 667663}, NULL) = 0
write(2, "readcd: Operation not permitted."..., 64readcd: Operation not permitted. Cannot send SCSI cmd via ioctl
) = 64
_exit(1) = ?
[18:41:49]-[Thu May 29]-[~]
[plail@plailis_lfs]
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: readcd with 2.5 kernels and ide-cd
2003-05-29 16:44 Markus Plail
@ 2003-05-29 17:30 ` Jens Axboe
0 siblings, 0 replies; 5+ messages in thread
From: Jens Axboe @ 2003-05-29 17:30 UTC (permalink / raw)
To: Markus Plail; +Cc: linux-kernel
On Thu, May 29 2003, Markus Plail wrote:
> Hi there!
>
> Is there work going on to get readcd working with 2.5 kernels and
> ide-cd (without ide-scsi)?
>
> regards
> Markus
>
>
> That's what i get:
>
> [18:41:23]-[Thu May 29]-[~]
> [plail@plailis_lfs]strace readcd dev=/dev/dvd f=/dev/null
> execve("/opt/schily/bin/readcd", ["readcd", "dev=/dev/dvd", "f=/dev/null"], [/* 52 vars */]) = 0
> brk(0) = 0x806a000
> open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
> open("/etc/ld.so.cache", O_RDONLY) = 3
> fstat64(3, {st_mode=S_IFREG|0644, st_size=66034, ...}) = 0
> old_mmap(NULL, 66034, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40017000
> close(3) = 0
> open("/lib/libc.so.6", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\10\332"..., 1024) = 1024
> fstat64(3, {st_mode=S_IFREG|0755, st_size=5021367, ...}) = 0
> old_mmap(NULL, 1215588, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40028000
> mprotect(0x40146000, 44132, PROT_NONE) = 0
> old_mmap(0x40146000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x11d000) = 0x40146000
> old_mmap(0x4014d000, 15460, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4014d000
> close(3) = 0
> munmap(0x40017000, 66034) = 0
> brk(0) = 0x806a000
> brk(0x806a0a8) = 0x806a0a8
> brk(0x806b000) = 0x806b000
> brk(0x806d000) = 0x806d000
> open("/dev/dvd", O_RDWR|O_NONBLOCK) = 3
> fcntl64(3, F_GETFL) = 0x8802 (flags O_RDWR|O_NONBLOCK|O_LARGEFILE)
> fcntl64(3, F_SETFL, O_RDWR|O_LARGEFILE) = 0
> ioctl(3, 0x5382, 0xbffff174) = 0
> ..
> ...[snip].....
> ..
> gettimeofday({1054226509, 647460}, NULL) = 0
> ioctl(3, 0x2285, 0xbfffeecc) = 0
> gettimeofday({1054226509, 648266}, NULL) = 0
> gettimeofday({1054226509, 648420}, NULL) = 0
> ioctl(3, 0x2285, 0xbfffed4c) = 0
> gettimeofday({1054226509, 650263}, NULL) = 0
> gettimeofday({1054226509, 650414}, NULL) = 0
> ioctl(3, 0x2285, 0xbfffeffc) = 0
> gettimeofday({1054226509, 651217}, NULL) = 0
> gettimeofday({1054226509, 651359}, NULL) = 0
> ioctl(3, 0x2285, 0xbfffee9c) = 0
> gettimeofday({1054226509, 653212}, NULL) = 0
> write(2, "Read speed: 8467 kB/s (CD 48x"..., 44Read speed: 8467 kB/s (CD 48x, DVD 6x).
> ) = 44
> write(2, "Write speed: 0 kB/s (CD 0x"..., 44Write speed: 0 kB/s (CD 0x, DVD 0x).
> ) = 44
> rt_sigaction(SIGINT, {0x8049d48, [INT], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
> rt_sigaction(SIGTERM, {0x8049d48, [TERM], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0
> gettimeofday({1054226509, 660589}, NULL) = 0
> ioctl(3, 0x2285, 0xbffff29c) = 0
> gettimeofday({1054226509, 661587}, NULL) = 0
> gettimeofday({1054226509, 661733}, NULL) = 0
> ioctl(3, 0x2285, 0xbffff26c) = 0
> gettimeofday({1054226509, 662943}, NULL) = 0
> write(2, "Capacity: 2246704 Blocks = 44934"..., 68Capacity: 2246704 Blocks = 4493408 kBytes = 4388 MBytes = 4601 prMB
> ) = 68
> write(2, "Sectorsize: 2048 Bytes\n", 23Sectorsize: 2048 Bytes
> ) = 23
> gettimeofday({1054226509, 663619}, NULL) = 0
> ioctl(3, 0x2285, 0xbfffefec) = 0
> gettimeofday({1054226509, 664867}, NULL) = 0
> write(2, "Copy from SCSI (0,0,0) disk to f"..., 48Copy from SCSI (0,0,0) disk to file '/dev/null'
> ) = 48
> open("/dev/null", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0666) = 4
> fcntl64(4, F_GETFL) = 0x8001 (flags O_WRONLY|O_LARGEFILE)
> fstat64(4, {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0
> ioctl(4, SNDCTL_TMR_TIMEBASE, 0xbfffedd8) = -1 ENOTTY (Inappropriate ioctl for device)
> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000
> _llseek(4, 0, [0], SEEK_CUR) = 0
> munmap(0x40017000, 4096) = 0
> write(2, "end: 2246704\n", 15end: 2246704
> ) = 15
> gettimeofday({1054226509, 666723}, NULL) = 0
> ) = 242, "addr: 0 cnt: 128\r", 24addr: 0 cnt: 128
> gettimeofday({1054226509, 667029}, NULL) = 0
> ioctl(3, 0x2285, 0xbfffef9c) = -1 ENOTTY (Inappropriate ioctl for device)
> write(3, ".\0\0\0$\0\4\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 46) = -1 EPERM (Operation not permitted)
> ioctl(3, 0x2201, 0xbfff6ee8) = 0
> gettimeofday({1054226509, 667663}, NULL) = 0
> write(2, "readcd: Operation not permitted."..., 64readcd: Operation not permitted. Cannot send SCSI cmd via ioctl
> ) = 64
> _exit(1) = ?
> [18:41:49]-[Thu May 29]-[~]
> [plail@plailis_lfs]
Something _very_ fishy is going on there. 0x2285 is the SG_IO ioctl.
First call to it completes, second one returns -ENOTTY. Looks very much
like some kernel bug, see the SNDCTL_TMR_TIMEBASE ioctl returning
-ENOTTY in-between.
I've seen this before (this very bug), but haven't chased it down.
--
Jens Axboe
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-05-30 6:35 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <fa.hr5v5at.1e5iqab@ifi.uio.no>
[not found] ` <fa.cqhesj4.p2oeoc@ifi.uio.no>
2003-05-29 21:43 ` readcd with 2.5 kernels and ide-cd Andy Polyakov
2003-05-30 6:48 ` Jens Axboe
2003-05-30 0:11 Douglas Gilbert
-- strict thread matches above, loose matches on Subject: below --
2003-05-29 16:44 Markus Plail
2003-05-29 17:30 ` Jens Axboe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox