From: Stephan von Krawczynski <skraw@ithnet.com>
To: Duncan Laurie <duncan@sun.com>
Cc: szepe@pinerecords.com, kwijibo@zianet.com, linux-kernel@vger.kernel.org
Subject: Re: 21rc6 serverworks IDE blows even more than is usual :)
Date: Sat, 31 May 2003 01:22:02 +0200 [thread overview]
Message-ID: <20030531012202.2c14ae77.skraw@ithnet.com> (raw)
In-Reply-To: <oprpzvr4xuury4o7@lists.bilicki.com>
On Fri, 30 May 2003 09:51:30 -0700
Duncan Laurie <duncan@sun.com> wrote:
> On Fri, 30 May 2003 12:11:08 +0200, Stephan von Krawczynski <skraw@ithnet.com> wrote:
> >
> > I don't know if this is in anyway interesting for you, but I got the same
> > chipset on an Asus board and been burning GBs of data onto DVDs with it and no
> > (ide) problem.
> >
>
> Its interesting to me.. It probably means my original diagnosis that this
> was a bad chip revision is unfounded and maybe it can be fixed with the
> right settings. Could I get an lspci -xxx for devices 00:0f.0 and 00:0f.1
> from your box as well so I can cross-ref it with the broken ones?
>
> -duncan
Just in case this should be needed:
lspci -xxx
00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
00: 66 11 01 02 07 00 00 02 93 00 01 06 00 20 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 01 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 3a 1a 08 00 00 00 00 07 00 00 02 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 07 cb 53 3d 00 00 00 40 00 00 00 00
70: 0c 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 80 0e 00 00 88 0e 00 0c ff 0f 04 10 01 00 00 00
b0: 04 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
00: 66 11 12 02 15 00 00 02 93 8a 01 01 08 40 80 00
10: 01 a8 00 00 01 a4 00 00 01 a0 00 00 01 98 00 00
20: 01 94 00 00 00 00 00 00 00 00 00 00 66 11 12 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 99 99 99 20 ff ff ff 20 00 00 00 04 00 00 00 00
50: 00 00 00 00 04 00 00 02 0f 04 03 00 00 00 00 00
60: 00 00 00 00 fd ff 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Regards,
Stephan
prev parent reply other threads:[~2003-05-30 23:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-29 11:40 21rc6 serverworks IDE blows even more than is usual :) Tomas Szepe
2003-05-29 14:01 ` Alan Cox
2003-05-29 15:07 ` Marc-Christian Petersen
2003-05-29 15:16 ` Tomas Szepe
2003-05-29 15:24 ` Tomas Szepe
2003-05-29 15:53 ` Tomas Szepe
2003-05-29 16:57 ` kwijibo
2003-05-29 17:03 ` Tomas Szepe
2003-05-30 10:05 ` Alan Cox
2003-05-29 22:25 ` Duncan Laurie
2003-05-29 23:00 ` kwijibo
2003-05-30 7:17 ` Tomas Szepe
2003-05-30 10:11 ` Stephan von Krawczynski
2003-05-30 16:51 ` Duncan Laurie
2003-05-30 16:52 ` Tomas Szepe
2003-05-30 23:22 ` Stephan von Krawczynski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030531012202.2c14ae77.skraw@ithnet.com \
--to=skraw@ithnet.com \
--cc=duncan@sun.com \
--cc=kwijibo@zianet.com \
--cc=linux-kernel@vger.kernel.org \
--cc=szepe@pinerecords.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox