* [BUG] 2.5.70-mm8 and the 3com NIC driver
@ 2003-06-12 21:46 Marek Habersack
2003-06-13 7:27 ` Thomas Schlichter
0 siblings, 1 reply; 3+ messages in thread
From: Marek Habersack @ 2003-06-12 21:46 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1351 bytes --]
Hello,
As mentioned in the subject, the kernel doesn't work with a 3Com 3c905
card. Here's what's shown on the screen and in the logs on both startup and
in intervals during normal system run:
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cc0 media 8802 dma 0000003b fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 240(0) current 240(0)
Transmit list 00000000 vs. efce2200.
0: @efce2200 length 8000002a status 0000002a
1: @efce22a0 length 80000050 status 00000050
2: @efce2340 length 8000002a status 0000002a
3: @efce23e0 length 8000002a status 0000002a
4: @efce2480 length 8000002a status 0000002a
5: @efce2520 length 80000036 status 00000036
6: @efce25c0 length 80000036 status 00000036
7: @efce2660 length 80000036 status 00000036
8: @efce2700 length 80000050 status 00000050
9: @efce27a0 length 80000050 status 00000050
10: @efce2840 length 80000050 status 00000050
11: @efce28e0 length 80000050 status 00000050
12: @efce2980 length 80000050 status 00000050
13: @efce2a20 length 80000050 status 00000050
14: @efce2ac0 length 80000050 status 80000050
15: @efce2b60 length 80000050 status 80000050
eth0: Resetting the Tx ring pointer.
All the earlier -mm kernels worked fine in this regard,
marek
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [BUG] 2.5.70-mm8 and the 3com NIC driver
2003-06-12 21:46 [BUG] 2.5.70-mm8 and the 3com NIC driver Marek Habersack
@ 2003-06-13 7:27 ` Thomas Schlichter
2003-06-13 17:07 ` Marek Habersack
0 siblings, 1 reply; 3+ messages in thread
From: Thomas Schlichter @ 2003-06-13 7:27 UTC (permalink / raw)
To: grendel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1911 bytes --]
Hi Marek!
I had a similar problem and for me there were two solutions.
1. Disable ACPI (for example with the 'acpi=off' boot option)
This was no major impact for me as ACPI never worked here well...
2. Revert the pci-init-ordering-fix from
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm8/broken-out/pci-init-ordering-fix.patch
This may be only suboptimal, as this patch seems to fix some problems...
Best regards
Thomas Schlichter
Marek Habersack wrote:
> Hello,
>
> As mentioned in the subject, the kernel doesn't work with a 3Com 3c905
> card. Here's what's shown on the screen and in the logs on both startup and
> in intervals during normal system run:
>
> NETDEV WATCHDOG: eth0: transmit timed out
> eth0: transmit timed out, tx_status 00 status e601.
> diagnostics: net 0cc0 media 8802 dma 0000003b fifo 0000
> eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
> Flags; bus-master 1, dirty 240(0) current 240(0)
> Transmit list 00000000 vs. efce2200.
> 0: @efce2200 length 8000002a status 0000002a
> 1: @efce22a0 length 80000050 status 00000050
> 2: @efce2340 length 8000002a status 0000002a
> 3: @efce23e0 length 8000002a status 0000002a
> 4: @efce2480 length 8000002a status 0000002a
> 5: @efce2520 length 80000036 status 00000036
> 6: @efce25c0 length 80000036 status 00000036
> 7: @efce2660 length 80000036 status 00000036
> 8: @efce2700 length 80000050 status 00000050
> 9: @efce27a0 length 80000050 status 00000050
> 10: @efce2840 length 80000050 status 00000050
> 11: @efce28e0 length 80000050 status 00000050
> 12: @efce2980 length 80000050 status 00000050
> 13: @efce2a20 length 80000050 status 00000050
> 14: @efce2ac0 length 80000050 status 80000050
> 15: @efce2b60 length 80000050 status 80000050
> eth0: Resetting the Tx ring pointer.
>
> All the earlier -mm kernels worked fine in this regard,
>
> marek
[-- Attachment #2: signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [BUG] 2.5.70-mm8 and the 3com NIC driver
2003-06-13 7:27 ` Thomas Schlichter
@ 2003-06-13 17:07 ` Marek Habersack
0 siblings, 0 replies; 3+ messages in thread
From: Marek Habersack @ 2003-06-13 17:07 UTC (permalink / raw)
To: Thomas Schlichter; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 592 bytes --]
On Fri, Jun 13, 2003 at 09:27:02AM +0200, Thomas Schlichter scribbled:
[snip]
> 1. Disable ACPI (for example with the 'acpi=off' boot option)
> This was no major impact for me as ACPI never worked here well...
>
> 2. Revert the pci-init-ordering-fix from
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm8/broken-out/pci-init-ordering-fix.patch
> This may be only suboptimal, as this patch seems to fix some problems...
Thanks for the tips but, fortunately, with -mm9 they were no longer needed -
it works like a charm.
thanks again,
marek
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-06-13 16:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-12 21:46 [BUG] 2.5.70-mm8 and the 3com NIC driver Marek Habersack
2003-06-13 7:27 ` Thomas Schlichter
2003-06-13 17:07 ` Marek Habersack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox