* 2.5.71 go boom
@ 2003-06-15 17:50 Jaakko Niemi
2003-06-15 18:11 ` Russell King
0 siblings, 1 reply; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-15 17:50 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 784 bytes --]
Hi,
I seem to be able to reproduce crash with 2.7.70-bk and .71.
First, I tried getting dlink dwl-650 wlan card up on my thinkpad
570e, but orinoco_cs does not seem to want to even look at it.
(any ideas what's the deal with that, btw?)
Ok, next I plugged in a edimax ep-4103dl nic, which is 8139c
based cardbus card. 8139too claims that chip is not responding,
so I pulled the card and re-inserted. 8139too finds it and
looks happy. I brought up the interface and tried pinging the
gw, and nothing goes through, so I pulled the card again and
reinserted and got the first oops into log. Nothing after that
except the rest 4 oopses after I ran shutdown.
log, log ran through ksymoops and config attached, please cc
me as I'm not on the list.
--j
[-- Attachment #2: log --]
[-- Type: application/octet-stream, Size: 21463 bytes --]
Jun 15 19:49:27 preciouss kernel: Linux version 2.5.71 (root@jumper) (gcc version 3.3 (Debian)) #1 su kes䠠 15 19:09:39 EEST 2003
Jun 15 19:49:27 preciouss kernel: Video mode to be used for restore is f00
Jun 15 19:49:27 preciouss kernel: BIOS-provided physical RAM map:
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
Jun 15 19:49:27 preciouss kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jun 15 19:49:27 preciouss kernel: 191MB LOWMEM available.
Jun 15 19:49:27 preciouss kernel: On node 0 totalpages: 49136
Jun 15 19:49:27 preciouss kernel: DMA zone: 4096 pages, LIFO batch:1
Jun 15 19:49:27 preciouss kernel: Normal zone: 45040 pages, LIFO batch:10
Jun 15 19:49:27 preciouss kernel: HighMem zone: 0 pages, LIFO batch:1
Jun 15 19:49:27 preciouss kernel: IBM machine detected. Enabling interrupts during APM calls.
Jun 15 19:49:27 preciouss kernel: IBM machine detected. Disabling SMBus accesses.
Jun 15 19:49:27 preciouss kernel: Building zonelist for node : 0
Jun 15 19:49:27 preciouss kernel: Kernel command line: root=/dev/hda1
Jun 15 19:49:27 preciouss kernel: Initializing CPU#0
Jun 15 19:49:27 preciouss kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
Jun 15 19:49:27 preciouss kernel: Detected 448.107 MHz processor.
Jun 15 19:49:27 preciouss kernel: Console: colour VGA+ 80x25
Jun 15 19:49:27 preciouss kernel: Calibrating delay loop... 884.73 BogoMIPS
Jun 15 19:49:27 preciouss kernel: Memory: 191004k/196544k available (2019k kernel code, 4908k reserved, 601k data, 132k init, 0k highmem)
Jun 15 19:49:27 preciouss kernel: Security Scaffold v1.0.0 initialized
Jun 15 19:49:27 preciouss kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 15 19:49:27 preciouss kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jun 15 19:49:27 preciouss kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jun 15 19:49:27 preciouss kernel: -> /dev
Jun 15 19:49:27 preciouss kernel: -> /dev/console
Jun 15 19:49:27 preciouss kernel: -> /root
Jun 15 19:49:27 preciouss kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jun 15 19:49:27 preciouss kernel: CPU: L2 cache: 256K
Jun 15 19:49:27 preciouss kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040
Jun 15 19:49:27 preciouss kernel: CPU: Intel Pentium III (Coppermine) stepping 01
Jun 15 19:49:27 preciouss kernel: Enabling fast FPU save and restore... done.
Jun 15 19:49:27 preciouss kernel: Enabling unmasked SIMD FPU exception support... done.
Jun 15 19:49:27 preciouss kernel: Checking 'hlt' instruction... OK.
Jun 15 19:49:27 preciouss kernel: POSIX conformance testing by UNIFIX
Jun 15 19:49:27 preciouss kernel: Initializing RT netlink socket
Jun 15 19:49:27 preciouss kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd96f, last bus=7
Jun 15 19:49:27 preciouss kernel: PCI: Using configuration type 1
Jun 15 19:49:27 preciouss kernel: mtrr: v2.0 (20020519)
Jun 15 19:49:27 preciouss kernel: BIO: pool of 256 setup, 15Kb (60 bytes/bio)
Jun 15 19:49:27 preciouss kernel: biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
Jun 15 19:49:27 preciouss kernel: biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
Jun 15 19:49:27 preciouss kernel: biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
Jun 15 19:49:27 preciouss kernel: biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
Jun 15 19:49:27 preciouss kernel: biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
Jun 15 19:49:27 preciouss kernel: biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Jun 15 19:49:27 preciouss kernel: Linux Plug and Play Support v0.96 (c) Adam Belay
Jun 15 19:49:27 preciouss kernel: pnp: the driver 'system' has been registered
Jun 15 19:49:27 preciouss kernel: block request queues:
Jun 15 19:49:27 preciouss kernel: 4/128 requests per read queue
Jun 15 19:49:27 preciouss kernel: 4/128 requests per write queue
Jun 15 19:49:27 preciouss kernel: enter congestion at 15
Jun 15 19:49:27 preciouss kernel: exit congestion at 17
Jun 15 19:49:27 preciouss kernel: Linux Kernel Card Services 3.1.22
Jun 15 19:49:27 preciouss kernel: options: [pci] [cardbus] [pm]
Jun 15 19:49:27 preciouss kernel: PCI: Probing PCI hardware
Jun 15 19:49:27 preciouss kernel: PCI: Probing PCI hardware (bus 00)
Jun 15 19:49:27 preciouss kernel: PCI: Discovered primary peer bus 08 [IRQ]
Jun 15 19:49:27 preciouss kernel: PCI: Using IRQ router PIIX [8086/7110] at 00:06.0
Jun 15 19:49:27 preciouss kernel: PCI: Found IRQ 10 for device 01:00.0
Jun 15 19:49:27 preciouss kernel: PCI: Sharing IRQ 10 with 00:02.0
Jun 15 19:49:27 preciouss kernel: PCI: Sharing IRQ 10 with 00:05.0
Jun 15 19:49:27 preciouss kernel: neofb: mapped io at cc800000
Jun 15 19:49:27 preciouss kernel: Autodetected internal display
Jun 15 19:49:27 preciouss kernel: Panel is a 1024x768 color TFT display
Jun 15 19:49:27 preciouss kernel: neofb: mapped framebuffer at cca01000
Jun 15 19:49:27 preciouss kernel: neofb v0.4.1: 2560kB VRAM, using 1024x768, 48.361kHz, 60Hz
Jun 15 19:49:27 preciouss kernel: fb0: MagicGraph 256AV frame buffer device
Jun 15 19:49:27 preciouss kernel: Console: switching to colour frame buffer device 128x48
Jun 15 19:49:27 preciouss kernel: pty: 256 Unix98 ptys configured
Jun 15 19:49:27 preciouss kernel: SBF: ACPI BOOT descriptor is wrong length (39)
Jun 15 19:49:27 preciouss kernel: SBF: Simple Boot Flag extension found and enabled.
Jun 15 19:49:27 preciouss kernel: SBF: Setting boot flags 0x1
Jun 15 19:49:27 preciouss kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Jun 15 19:49:27 preciouss kernel: Enabling SEP on CPU 0
Jun 15 19:49:27 preciouss kernel: Journalled Block Device driver loaded
Jun 15 19:49:27 preciouss kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jun 15 19:49:27 preciouss kernel: Limiting direct PCI/PCI transfers.
Jun 15 19:49:27 preciouss kernel: isapnp: Scanning for PnP cards...
Jun 15 19:49:27 preciouss kernel: isapnp: No Plug & Play device found
Jun 15 19:49:27 preciouss kernel: Real Time Clock Driver v1.11
Jun 15 19:49:27 preciouss kernel: Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
Jun 15 19:49:27 preciouss kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 15 19:49:27 preciouss kernel: pnp: the driver 'serial' has been registered
Jun 15 19:49:27 preciouss kernel: Floppy drive(s): fd0 is 1.44M
Jun 15 19:49:27 preciouss kernel: FDC 0 is a National Semiconductor PC87306
Jun 15 19:49:27 preciouss kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jun 15 19:49:27 preciouss kernel: loop: loaded (max 8 devices)
Jun 15 19:49:27 preciouss kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 15 19:49:27 preciouss kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 15 19:49:27 preciouss kernel: PIIX4: IDE controller at PCI slot 00:06.1
Jun 15 19:49:27 preciouss kernel: PIIX4: chipset revision 1
Jun 15 19:49:27 preciouss kernel: PIIX4: not 100%% native mode: will probe irqs later
Jun 15 19:49:27 preciouss kernel: ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
Jun 15 19:49:27 preciouss kernel: hda: FUJITSU MHR2030AT, ATA DISK drive
Jun 15 19:49:27 preciouss kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 15 19:49:27 preciouss kernel: hda: max request size: 1024KiB
Jun 15 19:49:27 preciouss kernel: hda: host protected area => 1
Jun 15 19:49:27 preciouss kernel: hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(33)
Jun 15 19:49:27 preciouss kernel: hda: hda1 hda2 hda3
Jun 15 19:49:27 preciouss kernel: Console: switching to colour frame buffer device 128x48
Jun 15 19:49:27 preciouss kernel: PCI: Found IRQ 10 for device 00:02.0
Jun 15 19:49:27 preciouss kernel: PCI: Sharing IRQ 10 with 00:05.0
Jun 15 19:49:27 preciouss kernel: PCI: Sharing IRQ 10 with 01:00.0
Jun 15 19:49:27 preciouss kernel: Yenta IRQ list 0898, PCI irq10
Jun 15 19:49:27 preciouss kernel: Socket status: 30000006
Jun 15 19:49:27 preciouss kernel: PCI: Found IRQ 9 for device 00:02.1
Jun 15 19:49:27 preciouss kernel: Yenta IRQ list 0898, PCI irq9
Jun 15 19:49:27 preciouss kernel: Socket status: 30000020
Jun 15 19:49:27 preciouss kernel: mice: PS/2 mouse device common for all mice
Jun 15 19:49:27 preciouss kernel: input: PC Speaker
Jun 15 19:49:27 preciouss kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jun 15 19:49:27 preciouss kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 15 19:49:27 preciouss kernel: input: AT Set 2 keyboard on isa0060/serio0
Jun 15 19:49:27 preciouss kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 15 19:49:27 preciouss kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jun 15 19:49:27 preciouss kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Jun 15 19:49:27 preciouss kernel: TCP: Hash tables configured (established 16384 bind 32768)
Jun 15 19:49:27 preciouss kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jun 15 19:49:27 preciouss kernel: kjournald starting. Commit interval 5 seconds
Jun 15 19:49:27 preciouss kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 15 19:49:27 preciouss kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 15 19:49:27 preciouss kernel: Freeing unused kernel memory: 132k freed
Jun 15 19:49:27 preciouss kernel: Adding 996020k swap on /dev/hda3. Priority:-1 extents:1
Jun 15 19:49:27 preciouss kernel: EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda1, internal journal
Jun 15 19:49:27 preciouss kernel: drivers/usb/core/usb.c: registered new driver usbfs
Jun 15 19:49:27 preciouss kernel: drivers/usb/core/usb.c: registered new driver hub
Jun 15 19:49:27 preciouss kernel: drivers/usb/core/usb.c: registered new driver usbkbd
Jun 15 19:49:27 preciouss kernel: drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
Jun 15 19:49:27 preciouss kernel: kjournald starting. Commit interval 5 seconds
Jun 15 19:49:27 preciouss kernel: EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal
Jun 15 19:49:27 preciouss kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0800-0x08ff: clean.
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jun 15 19:50:33 preciouss kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Jun 15 19:50:46 preciouss kernel: orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
Jun 15 19:50:46 preciouss kernel: orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
Jun 15 19:58:08 preciouss kernel: 8139too Fast Ethernet driver 0.9.26
Jun 15 19:58:08 preciouss kernel: PCI: Enabling device 06:00.0 (0000 -> 0003)
Jun 15 19:58:08 preciouss kernel: PCI: Setting latency timer of device 06:00.0 to 64
Jun 15 19:58:08 preciouss kernel: 8139too: 06:00.0: Chip not responding, ignoring board
Jun 15 19:58:15 preciouss kernel: PCI: Enabling device 06:00.0 (0000 -> 0003)
Jun 15 19:58:15 preciouss kernel: PCI: Setting latency timer of device 06:00.0 to 64
Jun 15 19:58:15 preciouss kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xccd1e000, 00:50:fc:2d:73:36, IRQ 9
Jun 15 19:58:15 preciouss kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Jun 15 19:58:35 preciouss kernel: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
Jun 15 19:58:57 preciouss kernel: Badness in kobject_get at lib/kobject.c:352
Jun 15 19:58:57 preciouss kernel: Call Trace: [kobject_get+76/80] [get_device+24/32] [device_add+91/256] [cardbus_assign_irqs+179/192] [pci_bus_add_devices+172/224] [cb_alloc+167/224] [socket_insert+105/128] [get_socket_status+23/32] [pccardd+393/512] [default_wake_function+0/48] [ret_from_fork+6/20] [default_wake_function+0/48] [pccardd+0/512] [kernel_thread_helper+5/12]
Jun 15 19:58:57 preciouss kernel: Unable to handle kernel paging request at virtual address 53425553
Jun 15 19:58:57 preciouss kernel: printing eip:
Jun 15 19:58:57 preciouss kernel: c023a992
Jun 15 19:58:57 preciouss kernel: *pde = 00000000
Jun 15 19:58:57 preciouss kernel: Oops: 0002 [#1]
Jun 15 19:58:57 preciouss kernel: CPU: 0
Jun 15 19:58:57 preciouss kernel: EIP: 0060:[device_add+178/256] Not tainted
Jun 15 19:58:57 preciouss kernel: EFLAGS: 00010282
Jun 15 19:58:57 preciouss kernel: eax: cbf3d86c ebx: 00000000 ecx: c0381ac4 edx: 53425553
Jun 15 19:58:57 preciouss kernel: esi: cb845454 edi: cbf3d854 ebp: 00000002 esp: cbd15f24
Jun 15 19:58:57 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 19:58:57 preciouss kernel: Process pccardd (pid: 10, threadinfo=cbd14000 task=cbd98100)
Jun 15 19:58:57 preciouss kernel: Stack: cb845478 cb8454da 00000014 cb845400 cbf3ec14 cbf3ec00 c020de3c cb845454
Jun 15 19:58:57 preciouss kernel: cbf3ec0c cbf3ec00 cbf3ec14 c0282a87 cbf3ec00 00000009 cbdd3884 00001880
Jun 15 19:58:57 preciouss kernel: cbdd3880 00000000 00000080 cbdd3880 c027f9b9 cbdd3880 0000000a c027ecb7
Jun 15 19:58:57 preciouss kernel: Call Trace: [pci_bus_add_devices+172/224] [cb_alloc+167/224] [socket_insert+105/128] [get_socket_status+23/32] [pccardd+393/512] [default_wake_function+0/48] [ret_from_fork+6/20] [default_wake_function+0/48] [pccardd+0/512] [kernel_thread_helper+5/12]
Jun 15 19:58:57 preciouss kernel: Code: 89 32 89 56 04 89 c8 ba ff ff 00 00 0f c1 10 0f 85 da 01 00
Jun 15 20:00:32 preciouss kernel: mtrr: no MTRR for f5000000,400000 found
Jun 15 20:00:32 preciouss kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: printing eip:
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#2]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Process cardctl (pid: 646, threadinfo=ca4be000 task=ca00e680)
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
Jun 15 20:00:32 preciouss kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: printing eip:
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#3]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Process cardctl (pid: 648, threadinfo=ca4be000 task=ca00e680)
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
Jun 15 20:00:32 preciouss kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: printing eip:
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#4]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Process cardctl (pid: 649, threadinfo=ca4be000 task=ca00e680)
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
Jun 15 20:00:32 preciouss kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: printing eip:
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#5]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Process cardctl (pid: 650, threadinfo=ca4be000 task=ca00e680)
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
Jun 15 20:00:34 preciouss kernel: <4>Trying to free nonexistent resource <a0001000-a0001fff>
Jun 15 20:00:34 preciouss kernel: Trying to free nonexistent resource <a0000000-a0000fff>
[-- Attachment #3: log.ksymoops --]
[-- Type: application/octet-stream, Size: 13898 bytes --]
ksymoops 2.4.8 on i686 2.5.71. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.5.71/ (default)
-m /boot/System.map-2.5.71 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0800-0x08ff: clean.
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
Jun 15 19:49:28 preciouss kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jun 15 19:50:33 preciouss kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Jun 15 19:58:08 preciouss kernel: 8139too Fast Ethernet driver 0.9.26
Jun 15 19:58:08 preciouss kernel: 8139too: 06:00.0: Chip not responding, ignoring board
Jun 15 19:58:57 preciouss kernel: Call Trace: [kobject_get+76/80] [get_device+24/32] [device_add+91/256] [cardbus_assign_irqs+179/192] [pci_bus_add_devices+172/224] [cb_alloc+167/224] [socket_insert+105/128] [get_socket_status+23/32] [pccardd+393/512] [default_wake_function+0/48] [ret_from_fork+6/20] [default_wake_function+0/48] [pccardd+0/512] [kernel_thread_helper+5/12]
Jun 15 19:58:57 preciouss kernel: Unable to handle kernel paging request at virtual address 53425553
Jun 15 19:58:57 preciouss kernel: c023a992
Jun 15 19:58:57 preciouss kernel: *pde = 00000000
Jun 15 19:58:57 preciouss kernel: Oops: 0002 [#1]
Jun 15 19:58:57 preciouss kernel: CPU: 0
Jun 15 19:58:57 preciouss kernel: EIP: 0060:[device_add+178/256] Not tainted
Jun 15 19:58:57 preciouss kernel: EFLAGS: 00010282
Jun 15 19:58:57 preciouss kernel: eax: cbf3d86c ebx: 00000000 ecx: c0381ac4 edx: 53425553
Jun 15 19:58:57 preciouss kernel: esi: cb845454 edi: cbf3d854 ebp: 00000002 esp: cbd15f24
Jun 15 19:58:57 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 19:58:57 preciouss kernel: Stack: cb845478 cb8454da 00000014 cb845400 cbf3ec14 cbf3ec00 c020de3c cb845454
Jun 15 19:58:57 preciouss kernel: cbf3ec0c cbf3ec00 cbf3ec14 c0282a87 cbf3ec00 00000009 cbdd3884 00001880
Jun 15 19:58:57 preciouss kernel: cbdd3880 00000000 00000080 cbdd3880 c027f9b9 cbdd3880 0000000a c027ecb7
Jun 15 19:58:57 preciouss kernel: Call Trace: [pci_bus_add_devices+172/224] [cb_alloc+167/224] [socket_insert+105/128] [get_socket_status+23/32] [pccardd+393/512] [default_wake_function+0/48] [ret_from_fork+6/20] [default_wake_function+0/48] [pccardd+0/512] [kernel_thread_helper+5/12]
Jun 15 19:58:57 preciouss kernel: Code: 89 32 89 56 04 89 c8 ba ff ff 00 00 0f c1 10 0f 85 da 01 00
Using defaults from ksymoops -t elf32-i386 -a i386
>>eax; cbf3d86c <__crc_ide_task_ioctl+512567/567886>
>>ecx; c0381ac4 <devices_subsys+44/60>
>>edx; 53425553 <__crc_unlock_new_inode+2f5999/3163ae>
>>esi; cb845454 <__crc_scm_fp_dup+e8354/2ce205>
>>edi; cbf3d854 <__crc_ide_task_ioctl+51254f/567886>
>>esp; cbd15f24 <__crc_ide_task_ioctl+2eac1f/567886>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 89 32 mov %esi,(%edx)
Code; 00000002 Before first symbol
2: 89 56 04 mov %edx,0x4(%esi)
Code; 00000005 Before first symbol
5: 89 c8 mov %ecx,%eax
Code; 00000007 Before first symbol
7: ba ff ff 00 00 mov $0xffff,%edx
Code; 0000000c Before first symbol
c: 0f c1 10 xadd %edx,(%eax)
Code; 0000000f Before first symbol
f: 0f 85 da 01 00 00 jne 1ef <_EIP+0x1ef>
Jun 15 20:00:32 preciouss kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#2]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
>>ebx; ca4bfce4 <__crc_pneigh_lookup+46b2b/544767>
>>esi; cbdd3880 <__crc_ide_task_ioctl+3a857b/567886>
>>edi; ca4bfd2c <__crc_pneigh_lookup+46b73/544767>
>>ebp; bffffd10 <__crc_inet_del_protocol+1160ef/152a16>
>>esp; ca4bfcb0 <__crc_pneigh_lookup+46af7/544767>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 0f b6 40 3c movzbl 0x3c(%eax),%eax
Code; 00000004 Before first symbol
4: 88 43 1f mov %al,0x1f(%ebx)
Code; 00000007 Before first symbol
7: f6 46 26 01 testb $0x1,0x26(%esi)
Code; 0000000b Before first symbol
b: 74 3c je 49 <_EIP+0x49>
Code; 0000000d Before first symbol
d: c7 43 04 00 01 00 00 movl $0x100,0x4(%ebx)
Jun 15 20:00:32 preciouss kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#3]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
>>ebx; ca4bfce4 <__crc_pneigh_lookup+46b2b/544767>
>>esi; cbdd3880 <__crc_ide_task_ioctl+3a857b/567886>
>>edi; ca4bfd2c <__crc_pneigh_lookup+46b73/544767>
>>ebp; bffffd10 <__crc_inet_del_protocol+1160ef/152a16>
>>esp; ca4bfcb0 <__crc_pneigh_lookup+46af7/544767>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 0f b6 40 3c movzbl 0x3c(%eax),%eax
Code; 00000004 Before first symbol
4: 88 43 1f mov %al,0x1f(%ebx)
Code; 00000007 Before first symbol
7: f6 46 26 01 testb $0x1,0x26(%esi)
Code; 0000000b Before first symbol
b: 74 3c je 49 <_EIP+0x49>
Code; 0000000d Before first symbol
d: c7 43 04 00 01 00 00 movl $0x100,0x4(%ebx)
Jun 15 20:00:32 preciouss kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#4]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
>>ebx; ca4bfce4 <__crc_pneigh_lookup+46b2b/544767>
>>esi; cbdd3880 <__crc_ide_task_ioctl+3a857b/567886>
>>edi; ca4bfd2c <__crc_pneigh_lookup+46b73/544767>
>>ebp; bffffd10 <__crc_inet_del_protocol+1160ef/152a16>
>>esp; ca4bfcb0 <__crc_pneigh_lookup+46af7/544767>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 0f b6 40 3c movzbl 0x3c(%eax),%eax
Code; 00000004 Before first symbol
4: 88 43 1f mov %al,0x1f(%ebx)
Code; 00000007 Before first symbol
7: f6 46 26 01 testb $0x1,0x26(%esi)
Code; 0000000b Before first symbol
b: 74 3c je 49 <_EIP+0x49>
Code; 0000000d Before first symbol
d: c7 43 04 00 01 00 00 movl $0x100,0x4(%ebx)
Jun 15 20:00:32 preciouss kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 0000003c
Jun 15 20:00:32 preciouss kernel: c0280477
Jun 15 20:00:32 preciouss kernel: *pde = 00000000
Jun 15 20:00:32 preciouss kernel: Oops: 0000 [#5]
Jun 15 20:00:32 preciouss kernel: CPU: 0
Jun 15 20:00:32 preciouss kernel: EIP: 0060:[pcmcia_get_configuration_info+135/432] Not tainted
Jun 15 20:00:32 preciouss kernel: EFLAGS: 00010246
Jun 15 20:00:32 preciouss kernel: eax: 00000000 ebx: ca4bfce4 ecx: 00000000 edx: 00000000
Jun 15 20:00:32 preciouss kernel: esi: cbdd3880 edi: ca4bfd2c ebp: bffffd10 esp: ca4bfcb0
Jun 15 20:00:32 preciouss kernel: ds: 007b es: 007b ss: 0068
Jun 15 20:00:32 preciouss kernel: Stack: c020a900 ca4bfce4 bffffd10 00000048 c0486403 cbd3dd80 c0283bf2 cbd5c180
Jun 15 20:00:32 preciouss kernel: ca4bfce4 00000048 00010206 00000000 00000000 00000000 00000000 00000021
Jun 15 20:00:32 preciouss kernel: 00000021 00000021 00000000 00000000 00000000 00000000 00000000 00000000
Jun 15 20:00:32 preciouss kernel: Call Trace: [__copy_from_user_ll+112/128] [ds_ioctl+1490/1600] [bh_lru_install+181/256] [ext3_get_block_handle+207/896] [__find_get_block+123/272] [journal_dirty_metadata+406/544] [__getblk+55/112] [wake_up_buffer+15/48] [unlock_buffer+44/80] [buffered_rmqueue+209/368] [wake_up_buffer+15/48] [__alloc_pages+144/784] [do_anonymous_page+352/640] [handle_mm_fault+224/384] [do_page_fault+604/1145] [old_mmap+257/320] [sys_ioctl+284/672] [syscall_call+7/11]
Jun 15 20:00:32 preciouss kernel: Code: 0f b6 40 3c 88 43 1f f6 46 26 01 74 3c c7 43 04 00 01 00 00
>>ebx; ca4bfce4 <__crc_pneigh_lookup+46b2b/544767>
>>esi; cbdd3880 <__crc_ide_task_ioctl+3a857b/567886>
>>edi; ca4bfd2c <__crc_pneigh_lookup+46b73/544767>
>>ebp; bffffd10 <__crc_inet_del_protocol+1160ef/152a16>
>>esp; ca4bfcb0 <__crc_pneigh_lookup+46af7/544767>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 0f b6 40 3c movzbl 0x3c(%eax),%eax
Code; 00000004 Before first symbol
4: 88 43 1f mov %al,0x1f(%ebx)
Code; 00000007 Before first symbol
7: f6 46 26 01 testb $0x1,0x26(%esi)
Code; 0000000b Before first symbol
b: 74 3c je 49 <_EIP+0x49>
Code; 0000000d Before first symbol
d: c7 43 04 00 01 00 00 movl $0x100,0x4(%ebx)
1 warning and 1 error issued. Results may not be reliable.
[-- Attachment #4: .config --]
[-- Type: application/octet-stream, Size: 27314 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_YENTA=y
CONFIG_CARDBUS=y
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
# CONFIG_TMD_HERMES is not set
CONFIG_PCI_HERMES=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
# CONFIG_PCMCIA_ATMEL is not set
CONFIG_NET_WIRELESS=y
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
#
# Old SIR device drivers
#
# CONFIG_IRTTY_OLD is not set
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_TOSHIBA_OLD is not set
CONFIG_TOSHIBA_FIR=m
# CONFIG_SMC_IRCC_OLD is not set
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C Hardware Sensors Chip support
#
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_AMD7XX_TCO is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_MWAVE=m
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
# CONFIG_VIDEO_PROC_FS is not set
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Hollywood Plus / DXR3
#
# CONFIG_DXR3 is not set
# CONFIG_VIDEO_BTCX is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# SCSI support is needed for USB Storage
#
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m
#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_KALLSYMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-15 17:50 2.5.71 go boom Jaakko Niemi
@ 2003-06-15 18:11 ` Russell King
2003-06-15 20:00 ` Jaakko Niemi
0 siblings, 1 reply; 15+ messages in thread
From: Russell King @ 2003-06-15 18:11 UTC (permalink / raw)
To: Jaakko Niemi; +Cc: linux-kernel
On Sun, Jun 15, 2003 at 08:50:49PM +0300, Jaakko Niemi wrote:
> I seem to be able to reproduce crash with 2.7.70-bk and .71.
> First, I tried getting dlink dwl-650 wlan card up on my thinkpad
> 570e, but orinoco_cs does not seem to want to even look at it.
> (any ideas what's the deal with that, btw?)
What happens if you plug in your cardbus card before the dlink wlan card?
If that doesn't work, please repeat your procedure to cause the oops.
In either case, could you send the output of lspci -vv at the
following points:
- directly after boot
- after you insert the cardbus card
- after you remove it
- after you re-insert (and get the oops)
Thanks.
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-15 18:11 ` Russell King
@ 2003-06-15 20:00 ` Jaakko Niemi
2003-06-15 20:28 ` Russell King
0 siblings, 1 reply; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-15 20:00 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1328 bytes --]
Russell King <rmk@arm.linux.org.uk> writes:
> On Sun, Jun 15, 2003 at 08:50:49PM +0300, Jaakko Niemi wrote:
>> I seem to be able to reproduce crash with 2.7.70-bk and .71.
>> First, I tried getting dlink dwl-650 wlan card up on my thinkpad
>> 570e, but orinoco_cs does not seem to want to even look at it.
>> (any ideas what's the deal with that, btw?)
>
> What happens if you plug in your cardbus card before the dlink wlan card?
Same thing.
> If that doesn't work, please repeat your procedure to cause the oops.
If I boot without the card, I don't seem to be able to get any
packets out at all, but if I boot with the card inserted, the
driver loads normally and I can get the interface up. Still, if
I remove it and reinsert few times, crash happens.
Looks like I now get repeatedly the oops when removing the
card for the second time.
> In either case, could you send the output of lspci -vv at the
> following points:
>
> - directly after boot
lspci1.boot
> - after you insert the cardbus card
lspci2.inserted
lspci3.driver is after installing the driver
> - after you remove it
lspci4.removed
lspci5.reinserted is after reinsert
> - after you re-insert (and get the oops)
lspci segfaults after the oops.
dmesg.out and dmes.out.ksymoops have the latest oops.
--j
[-- Attachment #2: oopsen.tar.gz --]
[-- Type: application/octet-stream, Size: 6588 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-15 20:00 ` Jaakko Niemi
@ 2003-06-15 20:28 ` Russell King
2003-06-15 23:46 ` Jaakko Niemi
0 siblings, 1 reply; 15+ messages in thread
From: Russell King @ 2003-06-15 20:28 UTC (permalink / raw)
To: Jaakko Niemi; +Cc: linux-kernel
On Sun, Jun 15, 2003 at 11:00:00PM +0300, Jaakko Niemi wrote:
> Russell King <rmk@arm.linux.org.uk> writes:
> > On Sun, Jun 15, 2003 at 08:50:49PM +0300, Jaakko Niemi wrote:
> >> I seem to be able to reproduce crash with 2.7.70-bk and .71.
> >> First, I tried getting dlink dwl-650 wlan card up on my thinkpad
> >> 570e, but orinoco_cs does not seem to want to even look at it.
> >> (any ideas what's the deal with that, btw?)
> >
> > What happens if you plug in your cardbus card before the dlink wlan card?
>
> Same thing.
Ok, I'm confused. I suspect that it may be something to do with two
PCI device structures appearing for the same device, however I don't
see that happening with the code which is in 2.5.7x.
Which kernel version first showed the problem?
Which modules are you loading?
Which version of cardmgr are you using?
Are you using any modules from the pcmcia-cs package?
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-15 20:28 ` Russell King
@ 2003-06-15 23:46 ` Jaakko Niemi
2003-06-16 7:54 ` Russell King
0 siblings, 1 reply; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-15 23:46 UTC (permalink / raw)
To: linux-kernel
Russell King <rmk@arm.linux.org.uk> writes:
> On Sun, Jun 15, 2003 at 11:00:00PM +0300, Jaakko Niemi wrote:
>> Russell King <rmk@arm.linux.org.uk> writes:
>> > On Sun, Jun 15, 2003 at 08:50:49PM +0300, Jaakko Niemi wrote:
>> >> I seem to be able to reproduce crash with 2.7.70-bk and .71.
>> >> First, I tried getting dlink dwl-650 wlan card up on my thinkpad
>> >> 570e, but orinoco_cs does not seem to want to even look at it.
>> >> (any ideas what's the deal with that, btw?)
>> >
>> > What happens if you plug in your cardbus card before the dlink wlan card?
>>
>> Same thing.
>
> Ok, I'm confused. I suspect that it may be something to do with two
> PCI device structures appearing for the same device, however I don't
> see that happening with the code which is in 2.5.7x.
Hmm, that second instance was not there always. I'll try to get
a crash without it.
> Which kernel version first showed the problem?
2.5.71-bk13 was the first I managed to notice this with, iirc.
If you have some older version in mind, I can try that.
> Which modules are you loading?
Only those that come by default with this config:
snd, soundcore, usbkbd and usbcore
> Which version of cardmgr are you using?
3.2.2
> Are you using any modules from the pcmcia-cs package?
No.
--j
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-15 23:46 ` Jaakko Niemi
@ 2003-06-16 7:54 ` Russell King
2003-06-16 18:36 ` Jaakko Niemi
2003-06-16 19:15 ` Peter Lundkvist
0 siblings, 2 replies; 15+ messages in thread
From: Russell King @ 2003-06-16 7:54 UTC (permalink / raw)
To: Jaakko Niemi; +Cc: linux-kernel
On Mon, Jun 16, 2003 at 02:46:00AM +0300, Jaakko Niemi wrote:
> > Which kernel version first showed the problem?
>
> 2.5.71-bk13 was the first I managed to notice this with, iirc.
> If you have some older version in mind, I can try that.
Which was the latest kernel version which didn't show the problem?
There doesn't seem to be any PCI, PCMCIA or driver model changes
from 2.5.70-bk12 to 2.5.70-bk13.
There are changes in:
-bk11 (pci)
-bk10 (pci)
-bk9 (driver model)
-bk4 (pci)
-bk2 (pcmcia)
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-16 7:54 ` Russell King
@ 2003-06-16 18:36 ` Jaakko Niemi
2003-06-16 19:15 ` Peter Lundkvist
1 sibling, 0 replies; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-16 18:36 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 942 bytes --]
Russell King <rmk@arm.linux.org.uk> writes:
> On Mon, Jun 16, 2003 at 02:46:00AM +0300, Jaakko Niemi wrote:
>> > Which kernel version first showed the problem?
>>
>> 2.5.71-bk13 was the first I managed to notice this with, iirc.
>> If you have some older version in mind, I can try that.
>
> Which was the latest kernel version which didn't show the problem?
No idea, as 2.5.69 did not boot, and 2.5.70 had other problems
with nic drivers.
> There doesn't seem to be any PCI, PCMCIA or driver model changes
> from 2.5.70-bk12 to 2.5.70-bk13.
>
> There are changes in:
>
> -bk11 (pci)
> -bk10 (pci)
> -bk9 (driver model)
> -bk4 (pci)
> -bk2 (pcmcia)
I just booted 2.5.70 with patch to Makefiles go get around the
crc library issue with 8139too and got it also to ooops with
few re-inserts, so this is not a new issue, unless there are
several overlapping. At least the oops looks different.
--j
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 8113 bytes --]
Linux version 2.5.70 (root@jumper) (gcc version 3.3 (Debian)) #1 ma kes䠠 16 20:57:57 EEST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
191MB LOWMEM available.
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45040 pages, LIFO batch:10
HighMem zone: 0 pages, LIFO batch:1
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
Building zonelist for node : 0
Kernel command line: root=/dev/hda1
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 448.147 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 884.73 BogoMIPS
Memory: 190984k/196544k available (2010k kernel code, 4928k reserved, 606k data, 132k init, 0k highmem)
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfd96f, last bus=7
PCI: Using configuration type 1
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
pnp: the driver 'system' has been registered
block request queues:
4/128 requests per read queue
4/128 requests per write queue
enter congestion at 15
exit congestion at 17
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX [8086/7110] at 00:06.0
SBF: ACPI BOOT descriptor is wrong length (39)
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Enabling SEP on CPU 0
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PCI: Found IRQ 10 for device 01:00.0
PCI: Sharing IRQ 10 with 00:02.0
PCI: Sharing IRQ 10 with 00:05.0
neofb: mapped io at cc80d000
Autodetected internal display
Panel is a 1024x768 color TFT display
neofb: mapped framebuffer at cca0e000
neofb v0.4.1: 2560kB VRAM, using 1024x768, 48.361kHz, 60Hz
fb0: MagicGraph 256AV frame buffer device
Console: switching to colour frame buffer device 128x48
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.11
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:06.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
hda: FUJITSU MHR2030AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(33)
hda:<4>hda: dma_timer_expiry: dma status == 0x22
hda: dma_timer_expiry: status=0x58 { DriveReady SeekComplete DataRequest }
hda: irq timeout: status=0xd0 { Busy }
hda: DMA disabled
ide0: reset: success
hda1 hda2 hda3
Console: switching to colour frame buffer device 128x48
PCI: Found IRQ 10 for device 00:02.0
PCI: Sharing IRQ 10 with 00:05.0
PCI: Sharing IRQ 10 with 01:00.0
Yenta IRQ list 0898, PCI irq10
Socket status: 30000006
PCI: Found IRQ 9 for device 00:02.1
Yenta IRQ list 0898, PCI irq9
Socket status: 30000020
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
spurious 8259A interrupt: IRQ7.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding 996020k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda1, internal journal
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/core/usb.c: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
8139too Fast Ethernet driver 0.9.26
PCI: Enabling device 06:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 06:00.0 to 64
eth0: RealTek RTL8139 Fast Ethernet at 0xccd10000, 00:50:fc:2d:73:36, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
PCI: Enabling device 06:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 06:00.0 to 64
eth0: RealTek RTL8139 Fast Ethernet at 0xccd0e000, 00:50:fc:2d:73:36, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
PCI: Enabling device 06:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 06:00.0 to 64
eth0: RealTek RTL8139 Fast Ethernet at 0xccd0e000, 00:50:fc:2d:73:36, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
Unable to handle kernel paging request at virtual address fffffff8
printing eip:
c023916a
*pde = 00001067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c023916a>] Not tainted
EFLAGS: 00010282
eax: fffffff4 ebx: 00000000 ecx: c037f924 edx: 00000000
esi: c8bd104c edi: ffffffdc ebp: 00000002 esp: cbd01f24
ds: 007b es: 007b ss: 0068
Process pccardd (pid: 10, threadinfo=cbd00000 task=cbdaa700)
Stack: c8bd1070 c8bd10d2 00000014 c8bd1000 cbf2ff14 cbf2ff00 c020c89c c8bd104c
cbf2ff0c cbf2ff00 cbf2ff14 c0280e77 cbf2ff00 00000009 cbd38208 00001880
cbd38200 00000000 00000080 cbd38200 c027dc89 cbd38200 0000000a c027d24a
Call Trace: [<c020c89c>] [<c0280e77>] [<c027dc89>] [<c027d24a>] [<c027df29>] [<c0118930>] [<c010ac82>] [<c0118930>] [<c027dda0>] [<c0108d59>]
Code: 8b 50 04 89 06 89 70 04 89 32 89 56 04 89 c8 ba ff ff 00 00
[-- Attachment #3: dmesg.ksymoops --]
[-- Type: application/octet-stream, Size: 3278 bytes --]
ksymoops 2.4.8 on i686 2.5.70. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.5.70/ (default)
-m /boot/System.map-2.5.70 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
8139too Fast Ethernet driver 0.9.26
Unable to handle kernel paging request at virtual address fffffff8
c023916a
*pde = 00001067
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c023916a>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: fffffff4 ebx: 00000000 ecx: c037f924 edx: 00000000
esi: c8bd104c edi: ffffffdc ebp: 00000002 esp: cbd01f24
ds: 007b es: 007b ss: 0068
Stack: c8bd1070 c8bd10d2 00000014 c8bd1000 cbf2ff14 cbf2ff00 c020c89c c8bd104c
cbf2ff0c cbf2ff00 cbf2ff14 c0280e77 cbf2ff00 00000009 cbd38208 00001880
cbd38200 00000000 00000080 cbd38200 c027dc89 cbd38200 0000000a c027d24a
Call Trace: [<c020c89c>] [<c0280e77>] [<c027dc89>] [<c027d24a>] [<c027df29>] [<c0118930>] [<c010ac82>] [<c0118930>] [<c027dda0>] [<c0108d59>]
Code: 8b 50 04 89 06 89 70 04 89 32 89 56 04 89 c8 ba ff ff 00 00
>>EIP; c023916a <device_add+aa/100> <=====
>>eax; fffffff4 <__kernel_rt_sigreturn+1bb4/????>
>>ecx; c037f924 <devices_subsys+44/60>
>>esi; c8bd104c <__crc_generic_file_aio_write_nolock+3bfe5/8679d>
>>edi; ffffffdc <__kernel_rt_sigreturn+1b9c/????>
>>esp; cbd01f24 <__crc_pcmcia_get_first_tuple+54af0/1156ad>
Trace; c020c89c <pci_bus_add_devices+ac/e0>
Trace; c0280e77 <cb_alloc+a7/e0>
Trace; c027dc89 <socket_insert+69/80>
Trace; c027d24a <get_socket_status+1a/20>
Trace; c027df29 <pccardd+189/1f0>
Trace; c0118930 <default_wake_function+0/30>
Trace; c010ac82 <ret_from_fork+6/14>
Trace; c0118930 <default_wake_function+0/30>
Trace; c027dda0 <pccardd+0/1f0>
Trace; c0108d59 <kernel_thread_helper+5/c>
Code; c023916a <device_add+aa/100>
00000000 <_EIP>:
Code; c023916a <device_add+aa/100> <=====
0: 8b 50 04 mov 0x4(%eax),%edx <=====
Code; c023916d <device_add+ad/100>
3: 89 06 mov %eax,(%esi)
Code; c023916f <device_add+af/100>
5: 89 70 04 mov %esi,0x4(%eax)
Code; c0239172 <device_add+b2/100>
8: 89 32 mov %esi,(%edx)
Code; c0239174 <device_add+b4/100>
a: 89 56 04 mov %edx,0x4(%esi)
Code; c0239177 <device_add+b7/100>
d: 89 c8 mov %ecx,%eax
Code; c0239179 <device_add+b9/100>
f: ba ff ff 00 00 mov $0xffff,%edx
1 warning and 1 error issued. Results may not be reliable.
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-16 7:54 ` Russell King
2003-06-16 18:36 ` Jaakko Niemi
@ 2003-06-16 19:15 ` Peter Lundkvist
2003-06-16 19:53 ` Stephen Hemminger
2003-06-16 20:27 ` Russell King
1 sibling, 2 replies; 15+ messages in thread
From: Peter Lundkvist @ 2003-06-16 19:15 UTC (permalink / raw)
To: linux-kernel
Russell King wrote:
>
> Which was the latest kernel version which didn't show the problem?
> There doesn't seem to be any PCI, PCMCIA or driver model changes
> from 2.5.70-bk12 to 2.5.70-bk13.
>
> There are changes in:
>
> -bk11 (pci)
> -bk10 (pci)
> -bk9 (driver model)
> -bk4 (pci)
> -bk2 (pcmcia)
I get the same problems: cardbus works only if I boot with the card
inserted. If I insert the card later I get two PCI device entries
for the device, and can't get any interrupts from the card (sometimes
the driver complains about the chip not responding (8139too)).
Tested with the following versions (exactly the same behaviour):
2.5.69-bk10
2.5.70
2.5.70-bk2
2.5.70-bk5
2.5.70-bk18
2.5.71
2.5.69-bk9 was OK.
/peter
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.5.71 go boom
2003-06-16 19:15 ` Peter Lundkvist
@ 2003-06-16 19:53 ` Stephen Hemminger
2003-06-16 20:27 ` Russell King
1 sibling, 0 replies; 15+ messages in thread
From: Stephen Hemminger @ 2003-06-16 19:53 UTC (permalink / raw)
To: Peter Lundkvist; +Cc: linux-kernel
Perhaps the changes to network hotplug are related. Did you see this?
>
> This patch causes an external script API change.
> Because network device go through the standard path, the action passed to the script
> is no longer register or unregister but is now "add" or "remove" like other devices.
> This is a good thing. When testing (at least on RHAT) just change /etc/hotplug/net.agent
> case statement:
>
> case $ACTION in
> add|register)
> # Don't do anything if the network is stopped
> if [ ! -f /var/lock/subsys/network ]; then
> exit 0
> fi
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.5.71 go boom
2003-06-16 19:15 ` Peter Lundkvist
2003-06-16 19:53 ` Stephen Hemminger
@ 2003-06-16 20:27 ` Russell King
2003-06-17 5:43 ` Peter Lundkvist
1 sibling, 1 reply; 15+ messages in thread
From: Russell King @ 2003-06-16 20:27 UTC (permalink / raw)
To: Peter Lundkvist, Jaakko Niemi; +Cc: linux-kernel
On Mon, Jun 16, 2003 at 09:15:06PM +0200, Peter Lundkvist wrote:
> Tested with the following versions (exactly the same behaviour):
> 2.5.69-bk10
>
> 2.5.69-bk9 was OK.
Great, this helps a lot. While I remove the bullet from my foot, could
you test this patch please?
--- linux/drivers/pcmcia/cs.c.old Mon Jun 16 21:17:45 2003
+++ linux/drivers/pcmcia/cs.c Mon Jun 16 21:24:23 2003
@@ -817,7 +817,8 @@
if ((skt->state & SOCKET_PRESENT) &&
!(status & SS_DETECT))
socket_shutdown(skt);
- if (status & SS_DETECT)
+ if (!(skt->state & SOCKET_PRESENT) &&
+ status & SS_DETECT)
socket_insert(skt);
}
if (events & SS_BATDEAD)
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-16 20:27 ` Russell King
@ 2003-06-17 5:43 ` Peter Lundkvist
2003-06-18 19:49 ` Jaakko Niemi
0 siblings, 1 reply; 15+ messages in thread
From: Peter Lundkvist @ 2003-06-17 5:43 UTC (permalink / raw)
To: Jaakko Niemi; +Cc: linux-kernel
Russell King wrote:
> Great, this helps a lot. While I remove the bullet from my foot, could
> you test this patch please?
>
> --- linux/drivers/pcmcia/cs.c.old Mon Jun 16 21:17:45 2003
> +++ linux/drivers/pcmcia/cs.c Mon Jun 16 21:24:23 2003
> @@ -817,7 +817,8 @@
> if ((skt->state & SOCKET_PRESENT) &&
> !(status & SS_DETECT))
> socket_shutdown(skt);
> - if (status & SS_DETECT)
> + if (!(skt->state & SOCKET_PRESENT) &&
> + status & SS_DETECT)
> socket_insert(skt);
> }
> if (events & SS_BATDEAD)
A quick test with this patch against 2.5.71: Works OK now!
Thank you
Peter
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.5.71 go boom
2003-06-17 5:43 ` Peter Lundkvist
@ 2003-06-18 19:49 ` Jaakko Niemi
2003-06-18 19:58 ` Russell King
0 siblings, 1 reply; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-18 19:49 UTC (permalink / raw)
To: linux-kernel
Peter Lundkvist <p.lundkvist@telia.com> writes:
> Russell King wrote:
>> Great, this helps a lot. While I remove the bullet from my foot, could
>> you test this patch please?
>>
>> --- linux/drivers/pcmcia/cs.c.old Mon Jun 16 21:17:45 2003
>> +++ linux/drivers/pcmcia/cs.c Mon Jun 16 21:24:23 2003
>> @@ -817,7 +817,8 @@
>> if ((skt->state & SOCKET_PRESENT) &&
>> !(status & SS_DETECT))
>> socket_shutdown(skt);
>> - if (status & SS_DETECT)
>> + if (!(skt->state & SOCKET_PRESENT) &&
>> + status & SS_DETECT)
>> socket_insert(skt);
>> }
>> if (events & SS_BATDEAD)
>
> A quick test with this patch against 2.5.71: Works OK now!
Confirmation. Booted 2.5.72 with this patch and tried swapping and switching
cards about 50 times, and things look stable.
Next, how to get my d-link dwl-650 wlan card up and running. If I insert it,
link light on it lights up, and cardctl sees it in socket. However the drivers
do not find it, and there is no interface available. This happens at least
with 2.5.70 to .72. Anyone got suggestions where to start looking?
Thanks.
--j
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-18 19:49 ` Jaakko Niemi
@ 2003-06-18 19:58 ` Russell King
2003-06-18 20:19 ` Jaakko Niemi
2003-06-25 13:48 ` Jaakko Niemi
0 siblings, 2 replies; 15+ messages in thread
From: Russell King @ 2003-06-18 19:58 UTC (permalink / raw)
To: Jaakko Niemi; +Cc: linux-kernel
On Wed, Jun 18, 2003 at 10:49:54PM +0300, Jaakko Niemi wrote:
> Next, how to get my d-link dwl-650 wlan card up and running. If I insert
> it, link light on it lights up, and cardctl sees it in socket. However
> the drivers do not find it, and there is no interface available. This
> happens at least with 2.5.70 to .72. Anyone got suggestions where to
> start looking?
Anything in /var/log/messages from cardmgr?
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-18 19:58 ` Russell King
@ 2003-06-18 20:19 ` Jaakko Niemi
2003-06-25 13:48 ` Jaakko Niemi
1 sibling, 0 replies; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-18 20:19 UTC (permalink / raw)
To: linux-kernel
Russell King <rmk@arm.linux.org.uk> writes:
> On Wed, Jun 18, 2003 at 10:49:54PM +0300, Jaakko Niemi wrote:
>> Next, how to get my d-link dwl-650 wlan card up and running. If I insert
>> it, link light on it lights up, and cardctl sees it in socket. However
>> the drivers do not find it, and there is no interface available. This
>> happens at least with 2.5.70 to .72. Anyone got suggestions where to
>> start looking?
>
> Anything in /var/log/messages from cardmgr?
Nothing whatsoever, only thing I get when unplugging and re-inserting
the card is:
kernel: spurious 8259A interrupt: IRQ7.
--j
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: 2.5.71 go boom
2003-06-18 19:58 ` Russell King
2003-06-18 20:19 ` Jaakko Niemi
@ 2003-06-25 13:48 ` Jaakko Niemi
1 sibling, 0 replies; 15+ messages in thread
From: Jaakko Niemi @ 2003-06-25 13:48 UTC (permalink / raw)
To: linux-kernel
Russell King <rmk@arm.linux.org.uk> writes:
> On Wed, Jun 18, 2003 at 10:49:54PM +0300, Jaakko Niemi wrote:
>> Next, how to get my d-link dwl-650 wlan card up and running. If I insert
>> it, link light on it lights up, and cardctl sees it in socket. However
>> the drivers do not find it, and there is no interface available. This
>> happens at least with 2.5.70 to .72. Anyone got suggestions where to
>> start looking?
>
> Anything in /var/log/messages from cardmgr?
Solved, the card was in monitor mode after playing with Kismet.
I took it back to normal mode and everything works great now.
It would be nice improvement to the driver to see the status.
Thanks.
--j
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2003-06-25 13:32 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-15 17:50 2.5.71 go boom Jaakko Niemi
2003-06-15 18:11 ` Russell King
2003-06-15 20:00 ` Jaakko Niemi
2003-06-15 20:28 ` Russell King
2003-06-15 23:46 ` Jaakko Niemi
2003-06-16 7:54 ` Russell King
2003-06-16 18:36 ` Jaakko Niemi
2003-06-16 19:15 ` Peter Lundkvist
2003-06-16 19:53 ` Stephen Hemminger
2003-06-16 20:27 ` Russell King
2003-06-17 5:43 ` Peter Lundkvist
2003-06-18 19:49 ` Jaakko Niemi
2003-06-18 19:58 ` Russell King
2003-06-18 20:19 ` Jaakko Niemi
2003-06-25 13:48 ` Jaakko Niemi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox