From: Damian Kolkowski <deimos@deimos.one.pl>
To: Danny ter Haar <dth@ncc1701.cistron.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0-test4(-mmX) via-rhine ethernet onboard C3 mini-itx doesn't work
Date: Wed, 3 Sep 2003 09:49:02 +0200 [thread overview]
Message-ID: <20030903074902.GA1786@deimos.one.pl> (raw)
In-Reply-To: <bj447c$el6$1@news.cistron.nl>
On Wed, Sep 03, 2003 at 07:11:40AM +0000, Danny ter Haar wrote:
> vanilla 2.6.0-test4 & test4-mm[45] & the onboard ethernet doesn't seem to work.
> No kernel panics, it just doesn't work :-(
It's standard APIC bug that no one care!
> Both have same ethernet driver:
>
> via-rhine.c:v1.10-LK1.1.19-2.5 July-12-2003 Written by Donald Becker
> http://www.scyld.com/network/via-rhine.html
> eth0: VIA VT6102 Rhine-II at 0xe800, 00:40:63:ca:6a:c1, IRQ 10.
> eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
> eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
I have via_kt-400 on ecs_l7vta, just check my previous post:
#Message-ID: <20030902110335.GA540@deimos.one.pl>
#Subject: [BUG] - 2.{4,6}.{22,0-test4} - CONFIG_X86_UP_APIC lack routing on eth
> Even manual config (normal is dhcp) doesn't work.
Same to me.
> Haven't seen anyone else report this, but this is repeatable and i suspect
> more people must have experienced this ?!
I report this bug probably 4 times! And it was since early 2.4.20, then APIC
changes, so I can use if.
> Machine is running debian-unstable distro.
Slackware GNU/Linux (current).
P.S. I you wont to use eth with that kernel, silmpe uncompile
CONFIG_X86_UP_APIC and use APM.
PP.S. Maby you have ATI card? Bug with setfonts and loadkeys on 1 tty it's
from time to time :-)
--
# Damian *dEiMoS* Kołkowski # http://deimos.one.pl/ #
next prev parent reply other threads:[~2003-09-03 7:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-03 7:11 2.6.0-test4(-mmX) via-rhine ethernet onboard C3 mini-itx doesn't work Danny ter Haar
2003-09-03 7:40 ` Roger Luethi
2003-09-03 7:49 ` Danny ter Haar
2003-09-03 7:49 ` Damian Kolkowski [this message]
2003-09-03 8:02 ` Danny ter Haar
2003-09-03 8:13 ` Damian Kolkowski
2003-09-03 8:13 ` Arjan van de Ven
2003-09-03 8:22 ` Damian Kołkowski
2003-09-03 9:17 ` Roger Luethi
2003-09-03 10:03 ` Danny ter Haar
2003-09-03 9:58 ` Danny ter Haar
2003-09-03 9:30 ` Mikael Pettersson
2003-09-03 9:49 ` Roger Luethi
2003-09-03 10:05 ` Danny ter Haar
2003-09-03 14:21 ` Alan Cox
2003-09-03 15:19 ` Mikael Pettersson
2003-09-03 15:40 ` Alan Cox
2003-09-03 16:23 ` Matt Heler
2003-09-03 16:55 ` Roger Luethi
[not found] <20030903113737.A3655@pc9391.uni-regensburg.de>
2003-09-03 9:46 ` Christian Guggenberger
2003-09-03 10:50 ` Damian Kołkowski
2003-09-03 14:53 ` Danny ter Haar
-- strict thread matches above, loose matches on Subject: below --
2003-09-03 15:48 Christian Guggenberger
2003-09-03 16:37 ` Danny ter Haar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030903074902.GA1786@deimos.one.pl \
--to=deimos@deimos.one.pl \
--cc=dth@ncc1701.cistron.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox