The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Adrian Bunk <bunk@fs.tum.de>, "Randy.Dunlap" <rddunlap@osdl.org>,
	jsimmons@infradead.org, "Justin T. Gibbs" <gibbs@scsiguy.com>,
	linux-kernel@vger.kernel.org
Subject: Re: 2.6: spurious recompiles
Date: Sun, 7 Sep 2003 09:00:25 +0200	[thread overview]
Message-ID: <20030907070025.GA12822@mars.ravnborg.org> (raw)
In-Reply-To: <20030907055144.GA1627@mars.ravnborg.org>

On Sun, Sep 07, 2003 at 07:51:44AM +0200, Sam Ravnborg wrote:
> On Sat, Sep 06, 2003 at 10:14:18PM +0200, Adrian Bunk wrote:
> > 2. pnmtologo
> > The following happens again once, but not when doing a third "make":
> >   ./scripts/pnmtologo -t mono -n logo_linux_mono -o drivers/video/logo/logo_linux_mono.c drivers/video/logo/logo_linux_mono.pbm
> 
> Would you mind to give this patch a spin. Only lightly tested here.
Tested it a bit more, it was not good. Corrected patch follows.
I had to spell out the dependencies, otherwise make saw them
as implicit targets, and deleted the .c files afterwards.

Btw the patch contains some general clean-up as well, unrelated to
the 'spurious recompile' issue.

	Sam

===== drivers/video/aty/Makefile 1.10 vs edited =====
--- 1.10/drivers/video/aty/Makefile	Thu May  1 18:32:15 2003
+++ edited/drivers/video/aty/Makefile	Sun Sep  7 07:45:54 2003
@@ -4,4 +4,3 @@
 atyfb-y				:= atyfb_base.o mach64_accel.o
 atyfb-$(CONFIG_FB_ATY_GX)	+= mach64_gx.o
 atyfb-$(CONFIG_FB_ATY_CT)	+= mach64_ct.o mach64_cursor.o
-atyfb-objs			:= $(atyfb-y)
===== drivers/video/console/Makefile 1.15 vs edited =====
--- 1.15/drivers/video/console/Makefile	Mon Feb  3 23:19:38 2003
+++ edited/drivers/video/console/Makefile	Sun Sep  7 07:45:55 2003
@@ -3,18 +3,16 @@
 # Rewritten to use lists instead of if-statements.
 
 # Font handling
-font-objs := fonts.o
+font-y := fonts.o
 
-font-objs-$(CONFIG_FONT_SUN8x16)   += font_sun8x16.o
-font-objs-$(CONFIG_FONT_SUN12x22)  += font_sun12x22.o
-font-objs-$(CONFIG_FONT_8x8)       += font_8x8.o
-font-objs-$(CONFIG_FONT_8x16)      += font_8x16.o
-font-objs-$(CONFIG_FONT_6x11)      += font_6x11.o
-font-objs-$(CONFIG_FONT_PEARL_8x8) += font_pearl_8x8.o
-font-objs-$(CONFIG_FONT_ACORN_8x8) += font_acorn_8x8.o
-font-objs-$(CONFIG_FONT_MINI_4x6)  += font_mini_4x6.o
-
-font-objs += $(font-objs-y)
+font-$(CONFIG_FONT_SUN8x16)   += font_sun8x16.o
+font-$(CONFIG_FONT_SUN12x22)  += font_sun12x22.o
+font-$(CONFIG_FONT_8x8)       += font_8x8.o
+font-$(CONFIG_FONT_8x16)      += font_8x16.o
+font-$(CONFIG_FONT_6x11)      += font_6x11.o
+font-$(CONFIG_FONT_PEARL_8x8) += font_pearl_8x8.o
+font-$(CONFIG_FONT_ACORN_8x8) += font_acorn_8x8.o
+font-$(CONFIG_FONT_MINI_4x6)  += font_mini_4x6.o
 
 # Each configuration option enables a list of files.
 
@@ -31,8 +29,11 @@
 # Files generated that shall be removed upon make clean
 clean-files := promcon_tbl.c
 
-$(obj)/promcon_tbl.c: $(src)/prom.uni
-	$(objtree)/scripts/conmakehash $< | \
+
+quiet_cmd_promtbl = GEN     $@
+      cmd_promtbl = scripts/conmakehash $< | \
 	sed -e '/#include <[^>]*>/p' -e 's/types/init/' \
 	    -e 's/dfont\(_uni.*\]\)/promfont\1 __initdata/' > $@
 
+$(obj)/promcon_tbl.c: $(src)/prom.uni
+	$(call cmd,promtbl)
===== drivers/video/i810/Makefile 1.2 vs edited =====
--- 1.2/drivers/video/i810/Makefile	Wed Jan  1 14:00:16 2003
+++ edited/drivers/video/i810/Makefile	Sun Sep  7 07:45:56 2003
@@ -1,15 +1,8 @@
 #
 # Makefile for the Intel 810/815 framebuffer driver
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
 
 obj-$(CONFIG_FB_I810)		+= i810fb.o
-
 
 i810fb-objs                     := i810_main.o i810_accel.o
 
===== drivers/video/logo/Makefile 1.3 vs edited =====
--- 1.3/drivers/video/logo/Makefile	Mon Jul 21 23:30:38 2003
+++ edited/drivers/video/logo/Makefile	Sun Sep  7 08:57:22 2003
@@ -14,29 +14,38 @@
 obj-$(CONFIG_LOGO_SUPERH_CLUT224)	+= logo_superh_clut224.o
 
 # Dependencies on generated files need to be listed explicitly
-
-$(obj)/%_mono.o: $(src)/%_mono.c
-
-$(obj)/%_vga16.o: $(src)/%_vga16.c
-
-$(obj)/%_clut224.o: $(src)/%_clut224.c
-
-$(obj)/%_gray256.o: $(src)/%_gray256.c
+# mono logo's
+$(obj)/logo_linux_mono.o:	$(obj)/logo_linux_mono.c
+$(obj)/logo_superh_mono.o:	$(obj)/logo_superh_mono.c
+
+# vga16 logo's
+$(obj)/logo_linux_vga16.o:	$(obj)/logo_linux_vga16.c
+$(obj)/logo_superh_vga16.o:	$(obj)/logo_superh_vga16.c
+
+# clut224 logo's
+$(obj)/logo_linux_clut224.o:	$(obj)/logo_linux_clut224.c
+$(obj)/logo_dec_clut224.o:	$(obj)/logo_dec_clut224.c
+$(obj)/logo_mac_clut224.o:	$(obj)/logo_mac_clut224.c
+$(obj)/logo_sgi_clut224.o:	$(obj)/logo_sgi_clut224.c
+$(obj)/logo_sun_clut224.o:	$(obj)/logo_sun_clut224.c
+$(obj)/logo_superh_clut224.o:	$(obj)/logo_superh_clut224.c
 
 # How to generate them
 
+# Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
+quiet_cmd_logo = LOGO    $@
+      cmd_logo = scripts/pnmtologo \
+		 -t $(patsubst $*_%,%,$(notdir $(basename $<))) \
+		 -n $(notdir $(basename $<)) -o $@ $<
+
 $(obj)/%_mono.c:	$(src)/%_mono.pbm
-		$(objtree)/scripts/pnmtologo -t mono -n $*_mono -o $@ $<
+	$(call cmd,logo)
 
 $(obj)/%_vga16.c:	$(src)/%_vga16.ppm
-		$(objtree)/scripts/pnmtologo -t vga16 -n $*_vga16 -o $@ $<
+	$(call cmd,logo)
 
 $(obj)/%_clut224.c:	$(src)/%_clut224.ppm
-		$(objtree)/scripts/pnmtologo -t clut224 -n $*_clut224 -o $@ $<
-
-$(obj)/%_gray256.c:	$(src)/%_gray256.pgm
-		$(objtree)/scripts/pnmtologo -t gray256 -n $*_gray256 -o $@ $<
-
+	$(call cmd,logo)
 
 # Files generated that shall be removed upon make clean
-clean-files := *_mono.c *_vga16.c *_clut224.c *_gray256.c
+clean-files := *_mono.c *_vga16.c *_clut224.c 

  reply	other threads:[~2003-09-07  7:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-09-06 20:14 2.6: spurious recompiles Adrian Bunk
2003-09-06 22:33 ` Randy.Dunlap
2003-09-07 10:37   ` Adrian Bunk
2003-09-07  5:33 ` Sam Ravnborg
2003-09-08 23:45   ` James Simmons
2003-09-07  5:51 ` Sam Ravnborg
2003-09-07  7:00   ` Sam Ravnborg [this message]
2003-09-07 10:17     ` Adrian Bunk
2003-09-08 23:45     ` James Simmons
     [not found] <20030906201417.GI14436@fs.tum.de.suse.lists.linux.kernel>
     [not found] ` <33384.4.4.25.4.1062887601.squirrel@www.osdl.org.suse.lists.linux.kernel>
2003-09-06 22:44   ` Andi Kleen
2003-09-07  5:36     ` Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030907070025.GA12822@mars.ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=bunk@fs.tum.de \
    --cc=gibbs@scsiguy.com \
    --cc=jsimmons@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rddunlap@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox