From: Matt Mackall <mpm@selenic.com>
To: David Ford <david+powerix@blue-labs.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: ip/ifconfig down/up hangs network, 2.6.0-test5
Date: Tue, 16 Sep 2003 14:33:52 -0500 [thread overview]
Message-ID: <20030916193352.GO4489@waste.org> (raw)
In-Reply-To: <3F6726EF.7090906@blue-labs.org>
On Tue, Sep 16, 2003 at 11:06:23AM -0400, David Ford wrote:
> eth2: Station identity 001f:0001:0008:000a
> eth2: Looks like a Lucent/Agere firmware version 8.10
> eth2: Ad-hoc demo mode supported
> eth2: IEEE standard IBSS ad-hoc mode supported
> eth2: WEP supported, 104-bit key
> eth2: MAC address 00:02:2D:5C:18:9F
> eth2: Station name "HERMES I"
> eth2: ready
> eth2: index 0x01: Vcc 3.3, irq 9, io 0x0100-0x013f
> eth2: New link status: Connected (0001)
> spurious 8259A interrupt: IRQ7.
> eth2: New link status: Connected (0001)
>
> If I set this network card down and try to bring it back up, all net
> device access stalls in D state. No dmesg, no panics, nadda.
I've seen a similar problem with tg3 in virgin -test5 and with hostap in
-test4-mm5. I believe I read it was due to something failing to
release the rtnl semaphore?
--
Matt Mackall : http://www.selenic.com : of or relating to the moon
prev parent reply other threads:[~2003-09-16 19:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-16 15:06 ip/ifconfig down/up hangs network, 2.6.0-test5 David Ford
2003-09-16 19:33 ` Matt Mackall [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030916193352.GO4489@waste.org \
--to=mpm@selenic.com \
--cc=david+powerix@blue-labs.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox