From: Olivier Galibert <olivier.galibert@limsi.fr>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com.br>
Cc: Pavel Machek <pavel@ucw.cz>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
Stephan von Krawczynski <skraw@ithnet.com>,
neilb@cse.unsw.edu.au,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: experiences beyond 4 GB RAM with 2.4.22
Date: Tue, 16 Sep 2003 23:23:02 +0200 [thread overview]
Message-ID: <20030916212301.GC17045@m23.limsi.fr> (raw)
In-Reply-To: <Pine.LNX.4.44.0309161814410.15569-100000@logos.cnet>
On Tue, Sep 16, 2003 at 06:16:58PM -0300, Marcelo Tosatti wrote:
> Which card and driver are you using for IO? 3ware?
Bus 6, device 2, function 0:
SCSI storage controller: Adaptec AIC-7902 U320 (rev 3).
Bus 6, device 2, function 1:
SCSI storage controller: Adaptec AIC-7902 U320 (#2) (rev 3).
0:
Adaptec AIC79xx driver version: 1.3.10
Adaptec AIC7902 Ultra320 SCSI adapter
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Allocated SCBs: 32, SG List Length: 85
Target 0 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Goal: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Curr: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Transmission Errors 0
Channel A Target 0 Lun 0 Settings
Commands Queued 6712736
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
1:
Adaptec AIC79xx driver version: 1.3.10
Adaptec AIC7902 Ultra320 SCSI adapter
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Allocated SCBs: 64, SG List Length: 85
Serial EEPROM:
0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
0x09f4 0x0146 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff
0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0410 0xb3d7
Target 0 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Goal: 160.000MB/s transfers (80.000MHz DT, 16bit)
Curr: 160.000MB/s transfers (80.000MHz DT, 16bit)
Transmission Errors 0
Channel A Target 0 Lun 0 Settings
Commands Queued 5523328
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
Channel A Target 0 Lun 1 Settings
Commands Queued 14646734
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
Target 1 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Goal: 160.000MB/s transfers (80.000MHz DT, 16bit)
Curr: 160.000MB/s transfers (80.000MHz DT, 16bit)
Transmission Errors 0
Channel A Target 1 Lun 0 Settings
Commands Queued 4
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
Channel A Target 1 Lun 1 Settings
Commands Queued 4
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
dmesg:
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
blk: queue f7965018, I/O limit 524287Mb (mask 0x7fffffffff)
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
scsi1:A:0:0: DV failed to configure device. Please file a bug report against this driver.
scsi1:A:1:0: DV failed to configure device. Please file a bug report against this driver.
Vendor: SEAGATE Model: ST373307LC Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7913e18, I/O limit 524287Mb (mask 0x7fffffffff)
Vendor: SUPER Model: GEM318 Rev: 0
Type: Processor ANSI SCSI revision: 02
blk: queue f7913018, I/O limit 524287Mb (mask 0x7fffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
(scsi1:A:0): 160.000MB/s transfers (80.000MHz DT, 16bit)
Vendor: transtec Model: Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f78cbc18, I/O limit 524287Mb (mask 0x7fffffffff)
Vendor: transtec Model: Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f78cba18, I/O limit 524287Mb (mask 0x7fffffffff)
(scsi1:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit)
Vendor: transtec Model: Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f78cb618, I/O limit 524287Mb (mask 0x7fffffffff)
Vendor: transtec Model: Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f78cb418, I/O limit 524287Mb (mask 0x7fffffffff)
scsi1:A:0:0: Tagged Queuing enabled. Depth 32
scsi1:A:0:1: Tagged Queuing enabled. Depth 32
scsi1:A:1:0: Tagged Queuing enabled. Depth 32
scsi1:A:1:1: Tagged Queuing enabled. Depth 32
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
Attached scsi disk sde at scsi1, channel 0, id 1, lun 1
SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
Partition check:
sda: sda1 sda2 sda3 sda4
SCSI device sdb: 2788016128 512-byte hdwr sectors (1427464 MB)
sdb: sdb1
SCSI device sdc: 2788016128 512-byte hdwr sectors (1427464 MB)
sdc: sdc1
SCSI device sdd: 4101521408 512-byte hdwr sectors (2099979 MB)
sdd: sdd1
SCSI device sde: 4101521408 512-byte hdwr sectors (2099979 MB)
sde: sde1
Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 3
> How much RAM do you have?
8Gb, currently down to 4Gb using mem=4G so that things actually work.
OG.
next prev parent reply other threads:[~2003-09-16 21:23 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-09 9:01 experiences beyond 4 GB RAM with 2.4.22 Stephan von Krawczynski
2003-09-09 12:25 ` Andrea Arcangeli
2003-09-12 2:46 ` Neil Brown
2003-09-12 6:54 ` Stephan von Krawczynski
2003-09-12 7:11 ` Jens Axboe
2003-09-12 7:53 ` Mike Fedyk
2003-09-15 22:01 ` Marcelo Tosatti
2003-09-16 8:21 ` Stephan von Krawczynski
2003-09-16 12:05 ` Stephan von Krawczynski
2003-09-16 13:11 ` Marcelo Tosatti
2003-09-16 13:36 ` Stephan von Krawczynski
2003-09-16 13:55 ` Richard B. Johnson
2003-09-16 14:13 ` Stephan von Krawczynski
2003-09-16 14:33 ` Marcelo Tosatti
2003-09-16 14:36 ` Stephan von Krawczynski
2003-09-16 14:36 ` Alan Cox
2003-09-16 15:20 ` Stephan von Krawczynski
2003-09-16 15:29 ` Alan Cox
2003-09-16 15:49 ` Timothy Miller
2003-09-16 16:17 ` Stephan von Krawczynski
2003-09-16 19:58 ` Olivier Galibert
2003-09-17 15:10 ` Alan Cox
2003-09-17 19:19 ` Jens Axboe
2003-09-17 19:30 ` Marcelo Tosatti
2003-09-17 22:18 ` Stephan von Krawczynski
2003-09-18 7:08 ` Jens Axboe
2003-09-18 7:12 ` Jens Axboe
2003-09-18 11:22 ` Stephan von Krawczynski
2003-09-18 15:05 ` William Lee Irwin III
2003-09-16 17:10 ` Pavel Machek
2003-09-16 19:53 ` Olivier Galibert
2003-09-16 20:04 ` Pavel Machek
2003-09-16 21:16 ` Marcelo Tosatti
2003-09-16 21:23 ` Olivier Galibert [this message]
2003-09-17 11:14 ` Stephan von Krawczynski
2003-09-17 13:08 ` Olivier Galibert
2003-09-18 9:58 ` Olivier Galibert
2003-09-18 10:13 ` Stephan von Krawczynski
2003-09-18 11:22 ` Olivier Galibert
2003-09-17 6:41 ` Rogier Wolff
2003-09-17 10:26 ` Jens Axboe
2003-09-17 10:42 ` Rogier Wolff
2003-09-17 10:53 ` Jens Axboe
2003-09-17 19:19 ` Pavel Machek
2003-09-18 11:39 ` Rogier Wolff
2003-09-18 12:13 ` Rogier Wolff
2003-09-16 15:22 ` Timothy Miller
2003-09-16 15:29 ` Martin J. Bligh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030916212301.GC17045@m23.limsi.fr \
--to=olivier.galibert@limsi.fr \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.tosatti@cyclades.com.br \
--cc=neilb@cse.unsw.edu.au \
--cc=pavel@ucw.cz \
--cc=skraw@ithnet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox