* [2.6 patch] remove unused CONFIG_SK98LIN_T*
@ 2003-09-22 12:31 Adrian Bunk
0 siblings, 0 replies; only message in thread
From: Adrian Bunk @ 2003-09-22 12:31 UTC (permalink / raw)
To: linux; +Cc: linux-kernel, linux-net, jgarzik
Current 2.6 contains a bunch of CONFIG_SK98LIN_T* options that are:
- used nowhere
- wrong, since the resulting varaibles are CONFIG_CONFIG_SK98LIN_T*
The patch below removes these options.
diffstat output:
drivers/net/Kconfig | 134 --------------------------------------------
1 files changed, 134 deletions(-)
cu
Adrian
--- linux-2.6.0-test5-mm4-no-smp-2.95/drivers/net/Kconfig.old 2003-09-22 14:02:17.000000000 +0200
+++ linux-2.6.0-test5-mm4-no-smp-2.95/drivers/net/Kconfig 2003-09-22 14:03:53.000000000 +0200
@@ -2118,140 +2118,6 @@
say M here and read Documentation/modules.txt. This is recommended.
The module will be called sk98lin.o.
-config CONFIG_SK98LIN_T1
- bool "3Com 3C940/3C941 Gigabit Ethernet Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - 3Com 3C940 Gigabit LOM Ethernet Adapter
- - 3Com 3C941 Gigabit LOM Ethernet Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T2
- bool "Allied Telesyn AT-29xx Gigabit Ethernet Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T3
- bool "CNet N-Way Gigabit Ethernet Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T4
- bool "D-Link DGE-530T Gigabit Ethernet Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - DGE-530T Gigabit Ethernet Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T5
- bool "Linksys EG10xx Ethernet Server Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - EG1032 v2 Instant Gigabit Network Adapter
- - EG1064 v2 Instant Gigabit Network Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T6
- bool "Marvell RDK-80xx Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - Marvell RDK-8001 Adapter
- - Marvell RDK-8002 Adapter
- - Marvell RDK-8003 Adapter
- - Marvell RDK-8004 Adapter
- - Marvell RDK-8006 Adapter
- - Marvell RDK-8007 Adapter
- - Marvell RDK-8008 Adapter
- - Marvell RDK-8009 Adapter
- - Marvell RDK-8011 Adapter
- - Marvell RDK-8012 Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T7
- bool "Marvell Yukon Gigabit Ethernet Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T8
- bool "SysKonnect SK-98xx Server Gigabit Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
- - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
- - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
- - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
- - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
- - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
- - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
- - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
- - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
- - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-config CONFIG_SK98LIN_T9
- bool "SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter"
- depends on SK98LIN
- help
- This driver supports:
-
- - SK-9521 V2.0 10/100/1000Base-T Adapter
- - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
- - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
- - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- - SK-9521 10/100/1000Base-T Adapter
-
- Questions concerning this driver may be addressed to:
- linux@syskonnect.de
-
-
config TIGON3
tristate "Broadcom Tigon3 support"
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-09-22 12:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-22 12:31 [2.6 patch] remove unused CONFIG_SK98LIN_T* Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox