AW: [2.6 patch] remove unused CONFIG_SK98LIN_T*

["demon" <demon@pro-linux.de>]

The next version of the driver (v6.18) will remove all unused
CONFIG_SK98LIN_T* options. I'll send the new version to Jeff tomorrow.

Cheers,

Mirko


--------- Original-Nachricht --------
Von: Adrian Bunk <bunk@fs.tum.de>
An: linux@syskonnect.de <linux@syskonnect.de>
Cc: linux-kernel@vger.kernel.org, linux-net@vger.kernel.org,
jgarzik@pobox.com
Betreff: [2.6 patch] remove unused CONFIG_SK98LIN_T*
Datum: 22/09/03 12:31

>
> Current 2.6 contains a bunch of CONFIG_SK98LIN_T* options that are:
> - used nowhere
> - wrong, since the resulting varaibles are CONFIG_CONFIG_SK98LIN_T*
>
> The patch below removes these options.
>
> diffstat output:
>
>  drivers/net/Kconfig |  134 --------------------------------------------
>  1 files changed, 134 deletions(-)
>
>
> cu
> Adrian
>
> --- linux-2.6.0-test5-mm4-no-smp-2.95/drivers/net/Kconfig.old	2003-09-22
14:02:17.000000000 +0200
> +++ linux-2.6.0-test5-mm4-no-smp-2.95/drivers/net/Kconfig	2003-09-22
14:03:53.000000000 +0200
> @@ -2118,140 +2118,6 @@
>  	  say M here and read Documentation/modules.txt. This is recommended.
>  	  The module will be called sk98lin.o.
>
> -config CONFIG_SK98LIN_T1
> -	bool &quot;3Com 3C940/3C941 Gigabit Ethernet Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
> -	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T2
> -	bool &quot;Allied Telesyn AT-29xx Gigabit Ethernet Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
> -	    - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T3
> -	bool &quot;CNet N-Way Gigabit Ethernet Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T4
> -	bool &quot;D-Link DGE-530T Gigabit Ethernet Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - DGE-530T Gigabit Ethernet Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T5
> -	bool &quot;Linksys EG10xx Ethernet Server Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - EG1032 v2 Instant Gigabit Network Adapter
> -	    - EG1064 v2 Instant Gigabit Network Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T6
> -	bool &quot;Marvell RDK-80xx Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - Marvell RDK-8001 Adapter
> -	    - Marvell RDK-8002 Adapter
> -	    - Marvell RDK-8003 Adapter
> -	    - Marvell RDK-8004 Adapter
> -	    - Marvell RDK-8006 Adapter
> -	    - Marvell RDK-8007 Adapter
> -	    - Marvell RDK-8008 Adapter
> -	    - Marvell RDK-8009 Adapter
> -	    - Marvell RDK-8011 Adapter
> -	    - Marvell RDK-8012 Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T7
> -	bool &quot;Marvell Yukon Gigabit Ethernet Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T8
> -	bool &quot;SysKonnect SK-98xx Server Gigabit Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
> -	    - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
> -	    - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
> -	    - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
> -	    - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
> -	    - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
> -	    - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
> -	    - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition
dual link)
> -	    - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
> -	    - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -config CONFIG_SK98LIN_T9
> -	bool &quot;SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter&quot;
> -	depends on SK98LIN
> -	help
> -	  This driver supports:
> -
> -	    - SK-9521 V2.0 10/100/1000Base-T Adapter
> -	    - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
> -	    - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
> -	    - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
> -	    - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
> -	    - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
> -	    - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
> -	    - SK-9521 10/100/1000Base-T Adapter
> -
> -	  Questions concerning this driver may be addressed to:
> -	      linux@syskonnect.de
> -
> -
>
>  config TIGON3
>  	tristate &quot;Broadcom Tigon3 support&quot;
>
>
> &lt;!DSPAM:3f6eeba0272221705448957&gt;
>
>
>
>
>

________________________________________________
Message sent using UebiMiau 2.7.2