From: Vojtech Pavlik <vojtech@suse.cz>
To: Danny ter Haar <dth@ncc1701.cistron.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0-test[56] pcnet32 problems
Date: Tue, 30 Sep 2003 06:56:47 +0200 [thread overview]
Message-ID: <20030930045647.GA20742@ucw.cz> (raw)
In-Reply-To: <blasc7$jfi$1@news.cistron.nl>
On Tue, Sep 30, 2003 at 03:13:11AM +0000, Danny ter Haar wrote:
> Got an cyrix box with built in ethernet & 2 extra ethernet cards
> as a firewall at home with a dsl line (connected to eth0)
>
> pcnet32.c:v1.27b 01.10.2002 tsbogend@alpha.franken.de
> PCI: Found IRQ 11 for device 0000:00:0f.0
> IRQ routing conflict for 0000:00:0f.0, have irq 9, want irq 11
> pcnet32: PCnet/FAST III 79C973 at 0xfca0, warning: CSR address invalid,
> using instead PROM address of 00 00 e2 24 41 1d assigned IRQ 9.
> eth0: registered as PCnet/FAST III 79C973
> pcnet32: 1 cards_found.
>
> Sometimes (even during low traffic) eth0 simply locks up:
> In dmesg i see:
> kernel: eth0: Bus master arbitration failure, status 88f3.
>
> rmmod pcnet32 results in kernel-panic.
> Only reboot works.
> tried:
> acpi == disabled
> pci=noacpi
>
> Another weird thing is output of ifconfig eth0:
>
> eth0 Link encap:Ethernet HWaddr 00:00:E2:24:41:1D
> inet addr:195.64.94.48 Bcast:195.64.94.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:30345 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:16042 dropped:0 overruns:0 carrier:16042
> collisions:0 txqueuelen:1000
> RX bytes:38404293 (36.6 MiB) TX bytes:1298028 (1.2 MiB)
> Interrupt:9 Base address:0xfca0
>
> 0 packets transmitted , all errors ans carrier faults ?
> Still it works! (this could be counters that are wrong)
>
> kernel config, lspci -v and dmesg output available at:
>
> http://dth.net/kernel/
>
> Any help/suggestions/hints appreciated.
Upgrade ifconfig?
--
Vojtech Pavlik
SuSE Labs, SuSE CR
next prev parent reply other threads:[~2003-09-30 4:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-30 3:13 2.6.0-test[56] pcnet32 problems Danny ter Haar
2003-09-30 4:56 ` Vojtech Pavlik [this message]
2003-09-30 6:26 ` Danny ter Haar
2003-09-30 5:18 ` Barry K. Nathan
2003-09-30 6:35 ` Danny ter Haar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030930045647.GA20742@ucw.cz \
--to=vojtech@suse.cz \
--cc=dth@ncc1701.cistron.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox